# 산업용 컨버팅 머신의 펜듈럼 덴서 모델링 및 해석

• 강현규 (건국대학교 대학원 기계설계학과) ;
• 신기현 (건국대학교 기계공학부) ;
• 김상철 (국민대학교 컴퓨터공학부)
• Published : 2009.05.01
• 139 19

#### Abstract

Dancer system is typically used equipment for attenuation of tension disturbances. In industrial converting machines, a composite type of dancer system is applied which is mixture of active and passive dancer. It includes feedback position control loop of roll with pendulum dancer and its characteristics is different from passive and active one. In this paper, a mathematical model of the pendulum dancer was derived including PI position feedback controller and it was analyzed by using a pole-zero map and bode plot under various conditions. It was found out that velocity, length of span and inertia were associated with the performance of regulation. It was suggested that the length of upstream span should be greater than that of the downstream and the inertia should be smaller for improvement of the performance. The results can be used for design guidelines of the industrial dancer system.

#### Keywords

Pendulum Dancer;Tension Control;Converting Machine;Design Guideline

#### References

1. Kee-Hyun Shin, 2000, Tension Control, Tappi Press, Atlanta, pp. 13-44
2. Chang Woo Lee, Jang Won Lee, Kee Hyun Shin and Soon Oh Kwon, 2008, 'A Taper Tension Profile Maker in a Converting Machine,' Journal of Mechanical Science and Technology, Vol. 22, No. 1, pp. 77-84 https://doi.org/10.1007/s12206-007-1009-6
3. Kee Hyun Shin and Wan Kee Hong, 1998, 'Real-Time Tension Control in a Multi-Stand Rolling System,' Journal of Mechanical Science and Technology, Vol. 12, No. 1, pp. 12-21
4. Lin, P. and Lan, M.S., 1993, 'Effect of PID Gains Tension,' Proceedings of the Second International Conference on Web Handling, pp. 66-76
5. Kee Hyun Shin, 1995, 'Variable-Gain PID Control of Longitudinal Tension in a Web Transport System,' Trans. of the KSME, Vol. 19, No. 3, pp. 724-730
6. Campbell, D.P., 1958, Process dynamics, John Wiely & Sons, Inc, pp. 20-21
7. Grenfell, K.P., 1963, 'Tension Control on Paper-Making and Converting Machinery,' Proc. IEEE Ninth Annual Conference on Electrical Engineering in the Pulp and Paper Industry, pp. 20-21
8. Shin, K. H., 1991, 'Distributed Control of Tension in Multi-Span Web Transport Systems,' Ph.D. thesis, Oklahoma State University, Stillwater, Oklahoma, pp 18~90
9. Pagilla, P. R., Perera, L. P. and Dwivedula, R. V., 2001, 'The Role of Active Dancers in Tension Control of Webs,' Proceedings of the Sixth International Conference on Web Handling, pp. 227-242
10. Prabhakar R. Pagilla, 2003, 'Periodic Tension Disturbance Attenuation in Web Process Lines Using Active Dancers,' Journal of Dynamic Systems, Measurement, and Control, Vol. 125, No. 3, pp. 361-371 https://doi.org/10.1115/1.1590678
11. Eui Yeol Hong, 2005, 'Aerodynamic Dancer and Tension Transducer in Web Handling,' Doctor of Philosophy, Oklahoma State University
12. Shelton, J. J., 1999, 'Limitations to Sensing of Web Tension by Means of Roller Reaction Forces,' Proceedings of the Fifth International Conference on Web Handling, Stillwater, OK
13. Vedrines, M. and Knittel, D., 2008, 'Modelling and H$\infty$ Low Order Control of Web Handling Systems with a Pendulum Dancer,' Proceedings of the 17th World Congress IFAC, pp.1012-1017 https://doi.org/10.3182/20080706-5-KR-1001.2725
14. Byoung Joon Ahn, Ju Yong Choi, Yu Shin Chang and Man Hyung Lee, 2004, 'On the Full Stand Modeling and Tension Control for the Hot Strip Finishing Mill with PID Structure,' Journal of Mechanical Science and Technology, Vol. 18, No. 7, pp. 1062-1073
15. Brandenburg, G., 1977, 'New Mathematical Models for Web Tension and Register Error,' Proceedings of Third International IFAC Conference on Instrumentation and Automation in the Paper, Rubber and Plastics Industry, Vol. 1, pp. 411-438
16. Ramamurthy V. Dwivedula, Yongliang Zhu and Prabhakar R. Pagilla, 2006, 'Characteristics of Active and Passive Dancers: A Comparative Study,' Control Engineering Practice, Vol. 14, Issue 4, pp. 409-423 https://doi.org/10.1016/j.conengprac.2005.02.003