Plastic Loads of Mitred Bends under Internal Pressure and Bending Moment

굽힘 하중과 내압이 가해지는 미터밴드의 소성하중

  • 민성환 (고려대학교 대학원 기계공학과) ;
  • 김윤재 (고려대학교 기계공학과) ;
  • 전준영 (고려대학교 대학원 기계공학과) ;
  • 이국희 (고려대학교 대학원 기계공학과)
  • Received : 2009.09.28
  • Accepted : 2009.12.08
  • Published : 2009.12.30

Abstract

Based on three-dimensional(3-D) finite element limit analyses, this paper provides limit and TES (Twice-Plastic Load) loads for mitred pipe bends under bending and pressure. The plastic limit loads are determined from FE limit analyses based on elastic-perfectly-plastic materials using the small and large geometry change option. A wide range of parameters related to the mitred bend geometry is considered. Based on the finite element results, closed-form approximations of plastic limit and TES plastic load solutions for mitred pipe bends under bending are proposed.

References

  1. ASME Boiler and Pressure Vessel Code (1998) Section III
  2. Babaii Kochekseraii, S., Robinson, M. (2003) Parametric Survey of Upper and Lower Bound Linit Internal Pressure for Single Mitred Pipe Bends of Various Geometries, International Journal of Pressure Vessels and Piping, 82, pp.480-488 https://doi.org/10.1016/j.ijpvp.2004.12.002
  3. Calladine, C.R. (1974) Limit Analysis of Curved Tubes, Journal of Mechanical Engineering Science, 16, pp.85-87 https://doi.org/10.1243/JMES_JOUR_1974_016_016_02
  4. Chattopadhyay, J., Natahani, D.K., Dutta, B.K., Kushwaha, H.S. (2000) Closed-Form Collapse Moment Equations of Elbows Under Internal Pressure and In-Plane Bending Moment, ASME Journal of Pressure Vessel Technology, 122, pp.431-436 https://doi.org/10.1115/1.1285988
  5. Goodall, I.W. (1978) Lower Bound Limit Analysis of Curved Tubes Loaded by Combined Internal Pressure and In-Plane Bending Moment, CEGB report RD/B/N4360, Central Electricity Generating Board
  6. Kim, Y.J., Lee, K.H., Oh, C.S., Yoo, B., Park, C.Y. (2007), Effect of Bend Angle on Plastic Loads of Pipe Bends Under Internal Pressure and In-Plane Bending, International Journal of Mechanical Sciences, In Press, (Accepted Manuscript, Available online 23 March 2007) https://doi.org/10.1016/j.ijmecsci.2007.03.006
  7. Kim, Y.J., Oh, C.S. (2006) Closed-Form Plastic Collapse Loads of Pipe Bends Under Combined Pressure and In-Plane Bending, Engineering Fracture Mechanics, 73, pp.1437-1454 https://doi.org/10.1016/j.engfracmech.2006.02.001
  8. Kim, Y.J., Oh, C.S. (2006) Limit Loads for Pipe Bends Under Combined Pressure and In-Plane Bending Based on Finite Element Limit Analysis, International Journal of Pressure Vessels and Piping, 83, pp.85-90 https://doi.org/10.1016/j.ijpvp.2005.11.001
  9. Kim, Y.J., Oh, C.S. (2007) Effect of Attached Straight Pipes on Finite Element Limit Analysis of Pipe Bends, International Journal of Pressure Vessels and Piping, 84, pp.177-184 https://doi.org/10.1016/j.ijpvp.2006.09.017
  10. Kitching, R., Rahimi, G.H., So, H.S. (1988), Plastic Collapse of Single Mitred Pipe Bends, International Journal of Pressure Vessels and Piping, 38, pp.129-145 https://doi.org/10.1016/0308-0161(89)90009-4
  11. Mourad, H.M., Younan, M.Y.A. (2000), Limit Load Analysis of Pipe Bends Under out-of-plane Moment Loading and Internal Pressure, Trans. ASME, Journal of Pressure Vessel Technology, 124, pp.32-37 https://doi.org/10.1115/1.1425807
  12. Mourad, H.M., Younan, M.Y.A. (2000), The Effect of Modeling Parameters on the Predicted Limit Loads for Pipe Bends Subjected to out-of-plane Moment Loading and Internal Pressure, Trans. ASME, Journal of Pressure Vessel Technology, 122, pp.450-456 https://doi.org/10.1115/1.1310334
  13. Mourad, H.M., Younan, M.Y.A. (2001), Nonlinear Analysis of Pipe Bends Subjected to out-of-plane Moment Loading and Internal Pressure, Trans. ASME, Journal of Pressure Vessel Technology, 123, pp.253-258 https://doi.org/10.1115/1.1310335
  14. Robinson, M., Babaii Kochekseraii, S. (2002) Parametric Survey of Upper and Lower Bound Linit in-plane Bending Moment for Single Mitred Pipe Bends of Various Geometries, International Journal of Pressure Vessels and Piping, 79, pp.735-740 https://doi.org/10.1016/S0308-0161(02)00095-9
  15. Spence, J., Findlay, G.E. (1973) Limit Load for Pipe Bends Under In-Plane Bending, Proc. 2nd Int. Conf. On Pressure Vessel Technology, San Antonio, 1-28, pp.393-399
  16. Tan, Y., Wilkins, K., Matzen, V. (2002), Correlation of Test and FEA Results for Elbows Subjected to out-of-plane Loading, Nuclear Engineering and Design, 217, pp.213-224 https://doi.org/10.1016/S0029-5493(02)00132-2
  17. Touboul, F., Ben Djedidia, M., Acker D. (1988) Design Criteria for Piping Components Against Plastic Collapse, Application to Pipe Bend Experiments, Pressure Vessel Technology, Proceedings of the 6th International Conference, Beijing
  18. Wood, J. (2008) A Review of Literature for the Structural Assessment of Mitred Bends, International Journal of Pressure Vessels and Piping, 85(5), pp.275-294 https://doi.org/10.1016/j.ijpvp.2007.11.003