- Volume 27 Issue 3
DOI QR Code
실리콘오일 에멀젼 소포제 조성에 있어서 유화제의 HLB가 소포성능에 미치는 영향
The Effects of HLB Value of the Surfactants Added in the Silicon Oil Emulsion Antifoamer on the Antifoaming Ability
- 김영호 (한경대학교 화학공학부)
- Kim, Young-Ho (Division of Chemical Engineering, Hankyong National University)
- 투고 : 2010.05.10
- 심사 : 2010.09.15
- 발행 : 2010.09.30
The effects of HLB value of nonionic mixed surfactants on the stability and antifoaming ability for silicon oil type emulsions were studied. To obtain a stable silicone emulsions, a higher HLB values and higher content of surfactants were preferred. To obtain a good antifoaming ability, however, a lower HLB value (more hydrophobic) and a lower content of the surfactants were preferred. It was observed, at lower HLB values(8 or 9), that the silicone oil drops were spreaded on the foam surface and effectively reduced the surface tension. And the spreading phenomena presumably acted as an antifoaming mechanism. Therefore, a higher hydrophobicity of the silicone oil emulsion resulted in a higher ability of antifoaming action.
- J. Anthony, O. Lenick, Silicone for personal care, Allured Publishing Corporation, 25-32 (2003).
- Korea Concrete Institute, Advanced Concrete Engineering for Special Concrete, Gimoon-Dang, 327-420 (2004).
- K. K. Yun, C. W. Hong, J. H. Lee, and S. H. Choi, Strength Development and Permeability of Latex-Modified Concrete with Rapid-Setting Cement, Journal of dispersion science and technology, J. Korea Concrete Institute, 14(3), 299 (2002). https://doi.org/10.4334/JKCI.2002.14.3.299
- J. Bajdik, E. Bolcskei, and K. Pintye, Study of the Effect of an Antifoaming Agent on the Evaporation of the Components During the Stirring of a Coating Dispersion Containing a Volatile Agent, J. disp. sci. tech., 29(5), 718 (2008). https://doi.org/10.1080/01932690701757964
- W. N. Poh, Developments in natural rubber latex. Production, properties, stability, Elastomerics, 12, 12 (1989).
- S. G. Choi, N. T. Lee, A Study on the Properties and Preparation of Siliconbased Defoamer Used in the Purification of Wasted-Water Extruded in the Paper-Fabrication, J. Korean Ind. Eng. Chem., 16(5), 614 (2005).
- N. H. Jeong, G. S. Park, J. S. Park, G. D. Nam, aming Properties for Aliphatic Antifoamer Formula, J. Korean Oil Chem., 16(2), 147 (1999).
- A. Lee Smith, Analysis of Silicones, JOHN WILEY & SONS, 85-107 (1974).
- R. J. Pugh, Foaming, foam films, antifoaming and defoaming, Adv. Colloid Interface Sci., 64, 67 (1996). https://doi.org/10.1016/0001-8686(95)00280-4
- Sydney Ross, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 118, 187-192 (1996).
- Sydney Ross & Ian D. Morrison, Colloidal Systems and Interface, JONH WILEY & SONS Inc., 288-326 (1988).
- D. R. Lee, C. N. Jung, G. D. S Seo, H. G. Choi, Y. H. Park, Studies on the Preparation of Silicone Emulsions Using Mixed Surfactants and Its Stability, J. Korean Ind. Eng. Chem, 6(6), 1124 (1995).
- G. E. Choi, Y. H. Kim, D. C. Shin, S. K. Lee, G. W. Shin, H. C. Kang, A Study of Slicone Emulsion Stabilization by Surfactant, Korea Soc. Geosystem Eng. 36(6), 428 (1999).
- D. T. Wasan and Y. H. Kim, and P. J. Breen, Surfactant science series, 61 ,237 (1996).
- G. Racz, K. Koczo, and D. T. Wasan, Mechanisms of Antifoam Deactivation, J. Coloid. Interface Sci., 181, 124 (1996). https://doi.org/10.1006/jcis.1996.0363
- B. K. Jha, S. P. Christiano, and D. O. Shah, Silicone Antifoam Performance: Correlation with Spreading and Surfactant Monolayer Packing, The ACS J. Surf. Colloids, 16(26), 9947 (2000). https://doi.org/10.1021/la990600f
- Sydney Ross & Ian D. Morrison, Colloidal Dispersions, JONH WILEY & SONS Inc., 202 (2002).
- R. Pelton and T. Flaherty, Review Defoamers: linking fundamentals to formulations, Polymer Internationals, 52, 479 (2003). https://doi.org/10.1002/pi.1203