DOI QR코드

DOI QR Code

환경변화에 의한 열 압착용 실리콘 고무의 정전기 대전 특성에 관한 연구

A Study on Electrostatic Electrification Properties of Silicone Rubber for Thermal Bonding According to the Variation of Environment

  • 이성일 (충주대학교 안전공학과)
  • Lee, Sung-Ill (Department of Safety Engineering, Chungju National University)
  • 투고 : 2010.07.13
  • 심사 : 2010.08.19
  • 발행 : 2010.09.01

초록

In this paper, the following results were obtained from the experiment in which electrification voltage of silicone rubber specimen for thermal bonding were measured under various time, temperature ($10{\sim}40^{\circ}C$), and humidity (30~90%) conditions and different amount of carbon additives (0~15 phr (per hundred resin)). Electrostatics electrification voltage decreased when carbon is up to 10 phr, and there was no electrification voltage in 15 phr condition. The electrostatics electrification voltage did not change over time. When the temperature was constant, electrostatics electrification voltage sharply dropped when the humidity was around 70%. That means, this condition might be appropriate for prevention of charging. The electrification voltage decreased as humidity and amount of carbon increased.

과제정보

연구 과제 주관 기관 : 충주대학교

참고문헌

  1. S.-I. Lee and S.-H. Kim, J. KIEEME 23, 48 (2010).
  2. S.-I. Lee, Elastomers and Composites 31, 335 (1996).
  3. H. J. Lee and S.-I. Lee, Elastomers and Composites 38, 227 (2003).
  4. S.-I. Lee, Elastomers and Composites 32, 309 (1997).
  5. W. D. Greason, J. Electrost. 28, 199 (1992). https://doi.org/10.1016/0304-3886(92)90073-3
  6. D. L. Lin and T. L. Welsher, J. Electrost. 31, 199 (1993). https://doi.org/10.1016/0304-3886(93)90009-V
  7. B. A. Unger, Proceedings of the IEEE International Reliability Physics Symposium (IEEE, Las Vegas, NV, 1981) p. 193
  8. R. G. Renninger, J. Electrost. 28, 253 (1992). https://doi.org/10.1016/0304-3886(92)90076-6