A New Unified Design Environment for Optimization of Electric Machines Based on Continuum Sensitivity and B-Spline Parametrization

  • Kim, Min-Ho (School of Electrical Engineering, Soongsil University) ;
  • Lee, Hyang-Beom (School of Electrical Engineering, Soongsil University) ;
  • Kim, Hyeong-Seok (School of Electrical and Electronics Engineering, Chung-Ang University) ;
  • Byun, Jin-Kyu (School of Electrical Engineering, Soongsil University)
  • 투고 : 2010.10.12
  • 심사 : 2010.10.27
  • 발행 : 2011.07.01


In this paper, a unified design environment is developed for the optimization of electric machines based on continuum sensitivity. For electromagnetic (EM) system analysis, COMSOL scripting environment is used. Optimization module is developed by MATLAB programming, which can be combined with COMSOL script commands. The modules are combined into one MATLAB project, and iteration process necessary for the optimization of EM system can be performed efficiently. During the design process, visual feedback of the current design status is given to the designer. In addition, the B-Spline parametrization of the nodal points is implemented to obtain smooth boundary of the device. The developed software is applied to the problem of finding uniform flux density distribution at the air gap of an electromagnet to verify its feasibility and effectiveness.


  1. Jin-Kyu Byun, Hyun-Kyo Jung, Song-yop Hahn, Kyung Choi and Il-Han Park, "Optimal Temperature Control for Induction Heating Devices Using Physical and Geometrical Design Sensitivity," IEEE Trans. Magn., vol.34, no.5, pp.3114-3117, Sept. 1998.
  2. Dong-Hun Kim, Se-Hee Lee, Il-Han Park and Joon- Ho Lee, "Derivation of a General Sensitivity Formula for Shape Optimization of 2-D Magnetostatic Systems by Continuum Approach," IEEE Trans. Magn., vol.38, no.2, pp.1125-1128, Mar. 2002.
  3. COMSOL Inc. ().
  4. Dong-Hun Kim, K. S. Ship and J. K. Sykulski, "Applying Continuum Design Sensitivity Analysis Combined With Standard EM Software to Shape Optimization in Magnetostatic Problems," IEEE Trans. Magn., vol.40, no.2, pp.1156-1159, Mar. 2004.
  5. Chang-Hyun Kim, Hyang-Beom Lee and Il-Han Park, "B-Spline Parametrization of Finite Element Models for Optimal Design of Electromagnetic Devices," IEEE Trans. Magn., vol.35, no.5, pp.3763-3765, Sept. 1999.
  6. Dong-Hun Kim, Se-Hee Lee, Il-Han Park and Joon- Ho Lee, "Minimization of Higher Back-EMF Harmonics in Permanent Magnet Motor Using Shape Design Sensitivity With B-Spline Parameterization," IEEE Trans. Magn., vol.39, no.3, pp.1269-1272, May 2003.
  7. DOT User Manual, Vanderplaats Research & Development, Inc., 2001.

피인용 문헌

  1. Optimum Design of Wideband Bandpass Filter With CSRR-Loaded Transmission Line Using Evolution Strategy vol.48, pp.2, 2012,
  2. A Second-Order Design Sensitivity-Assisted Monte Carlo Simulation Method for Reliability Evaluation of the Electromagnetic Devices vol.8, pp.4, 2013,
  3. Topology Optimization for Magnetic Circuits Dedicated to Electric Propulsion vol.50, pp.12, 2014,