DOI QR코드

DOI QR Code

Improving the Corrosion Resistance of Cold-Rolled Carbon Steel by Treatment with a Hybrid Organic/Inorganic Coating Solution

유/무기 하이브리드 코팅액에 의한 냉간압연강판의 내식특성

  • Kim, Jung-Ryang (Graduate School of UR Interdisciplinary program of Mechanical Engineering, Pukyong Nat'l Univ.) ;
  • Choi, Chang-Min (Graduate School of UR Interdisciplinary program of Mechanical Engineering, Pukyong Nat'l Univ.) ;
  • Nam, Ki-Woo (Dept. of Materials Science and Engineering, Pukyong Nat'l Univ.)
  • 김정량 (부경대학교 대학원 학연협동기계공학과) ;
  • 최창민 (부경대학교 대학원 학연협동기계공학과) ;
  • 남기우 (부경대학교 재료공학과)
  • Received : 2011.08.03
  • Accepted : 2012.02.02
  • Published : 2012.04.01

Abstract

In the past, a very popular way to reduce the corrosion rate of zinc was the use of chemical conversion layers based on $Cr^{+6}$. However, the use of chromium salts is now restricted because of environmental protection legislation. Previous research investigated the optimum corrosion resistance of galvanized steel treated with an organic/inorganic solution containing Si. The result showed that the optimum corrosion resistance occurred by heat treatment of $190^{\circ}C$ in 5 min. In this study, one organic and three hybrid organic/inorganic coating solutions were applied to cold-rolled (CR) carbon steel. The coatings were then evaluated for corrosion resistance under a salt spray test. The coating solutions examined in this study consisted of urethane-only, urethane-Si, urethane-Si-Ti, and urethane-Si-Ti-epoxy. The results of the 7 h salt spray test showed that the urethane-Si-Ti and urethane-Si-Ti-epoxy coating solutions had superior corrosion resistance on CR steel.

Keywords

Organic/Inorganic Hybrid;Cold Rolled Carbon Steel;Salt Spray Test;Coating Solution

Acknowledgement

Supported by : 한국연구재단

References

  1. Dobrza'nski, L. A., Brytan, Z., Actis Grande, M. and Rosso, M., 2007, "Corrosion Resistance Of Sintered Duplex Stainless Steels In The Salt Fog Spray Test," Journal of Materials Processing Technology, Vol. 192-193, pp. 443-448. https://doi.org/10.1016/j.jmatprotec.2007.04.077
  2. Kim, S. W. and Lee, C. T., 2006, "Environment-friendly Trivalent Chromate Treatment for Zn Electroplating," J. Korean Ind. Eng. Chem., Vol. 17, No. 5, pp. 433-442.
  3. Lee, C. T., 2007, "Enlargement of Anti-Corrosion of Zinc Plating by the Trivalent Chromium Sulfate Conversion Coating," J. Korean Ind. Eng. Chem., Vol. 18, No. 3, pp. 296-302.
  4. Kim, M., Lee, J. J., Kim, D. Y., Park, S. E. and Kwon, S. C., 2004, "The Trend of Study of Echo-Friendly Hard Trivalent Chromium Deposition," J. Kor. Inst. Surf. Eng., Vol. 37, No. 3, pp. 179-184.
  5. Deflorian, F., Rossi, S., Fedrizzi, L. and Bonora, P.L., 2005, "EIS Study of Organic Coating on Zinc Surface Pretreated with Environmentally Friendly Products," Progress in Organic Coatings, Vol. 52, pp. 271-279. https://doi.org/10.1016/j.porgcoat.2004.04.005
  6. Lee, J. D., 2006, "Development of Eco-Friendly Materials to Prevent Pollution; The Development of Cr-Free Nanocoating Materials," Ministry of Environment(Nanoco) Research Report.
  7. Kim, H. J., 1993, "Development of Anti-Fingers Printed EGI Steel Sheet with High Corrosion Resistance," J. Kor. Inst. Surf. Eng., Vol. 26, No. 6, pp. 307-315.
  8. Bajat, J.B., Miskovi'c-Stankovi'c V.B., Bibi'c N., Drazi'c, D.M., 2007, "The Influence of Zinc Surface Pretreatment on the Adhesion of Epoxy Coating Electrodeposited on Hot-di p Galvanized Steel," Progress in Organic Coating, 58, pp. 323-330. https://doi.org/10.1016/j.porgcoat.2007.01.011
  9. Wang, D. and Bierwagen, G. P., 2009, "Sol-.gel Coatings on Metals for Corrosion," Progress in Organic Coatings, Vol. 64, pp. 327-338. https://doi.org/10.1016/j.porgcoat.2008.08.010
  10. Steven, J. H., Lowe, C., James, T. M. and John, F. W., 2005, "Migration and Segregation Phenomena of a Silicone Additive in a Multilayer Organic Coating," Progress in Organic Coatings, Vol. 54, pp. 104-112. https://doi.org/10.1016/j.porgcoat.2005.04.007
  11. Zheludkevich, M.L., Miranda Salvado, I. and Ferreira, M.G.S., 2005, "Sol-gel Coatings for Corrosion Protection of Metals," J. Mater. Chem, Vol 15, pp. 5099-5111. https://doi.org/10.1039/b419153f
  12. Seo, H. S., Moon, H. J., Kim, J. S., Ahn, S. H., Moon, C. K. and Nam, K. W., 2010, "Corrosion Resistance of Galvanized Iron by Treating Modified Si Organic/Inorganic Hybrid Coating Solution," J. Ocean Engineering and Technology, Vol. 25, No. 1, pp. 32-38.
  13. Seo, H. S., Moon, H. J., Kim, J. S., Ahn, S. H., Moon, C. K. and Nam, K. W., 2010, "Corrosion Resistance of Zinc Coating Steel Coated Cr-free Coating Solution According to the Heat Treatment Time," J. Ocean Engineering and Technology, Vol. 24, No. 5, pp. 67-74.
  14. Seo, H. S., Moon, H. J., Kim, J. S., Ahn, S. H., Moon, C. K. and Nam, K.W., 2010, "Corrosion Resistance According to the Heat Treatment Temperature of Cr-Free Coating Solution on Zinc Coated Steel," J. Ocean Engineering and Technology, Vol. 24, No. 5, pp. 60-66.
  15. Gillett, M. and Nsongo, T., 1995, "Adhesion Characterization of Titanium and Titanium Nitride Thin Coatings on Metals Using the Scratch Test," Hit. J. Adhesion am/Adhesives, Vol. 15, pp. 191-196. https://doi.org/10.1016/0143-7496(95)91631-F
  16. ASTM D3359-09, Standard Test Methods for Measuring Adhesion by Tape Test.

Cited by

  1. Development of Organic/Inorganic Hybrid Coating Solution for High Strength Steel Sheet (SPFC780) vol.7, pp.6, 2016, https://doi.org/10.18178/ijcea.2016.7.6.614
  2. Corrosion Resistance of Galvanized Steel by Organic/Inorganic Hybrid Solution with Constant Amount of SiO2 Polysilicate and Melamine vol.22, pp.5, 2018, https://doi.org/10.9726/kspse.2018.22.5.036