DOI QR코드

DOI QR Code

A Study on SS400 Cutting Characteristics using Continuous Wave Fiber Laser

연속파 파이버 레이저를 이용한 SS400의 절단 특성에 관한 연구

  • 오용석 (조선대학교 첨단부품소재공학과) ;
  • 이가람 (조선대학교 첨단부품소재공학과) ;
  • 박은경 (조선대학교 첨단부품소재공학과) ;
  • 유영태 (조선대학교 메카트로닉스공학과)
  • Received : 2011.10.19
  • Accepted : 2012.04.14
  • Published : 2012.08.15

Abstract

This paper show the 2kW fiber laser cutting properties of SS400. The study was comparison of traditional 4kW $CO_2$ Laser cutting and 2kW Fiber laser cutting characteristics for the application of Industrial 2D Laser Cutting Machine. The laser used in this investigation was an IPG YLU-2000 multi-mode Ytterbium Fiber machine with a maximum power of 2000W and a wave length of 1070 nm. The laser was used in its Continuous Wave (CW) mode with an approximately top hat beam intensity distribution. Fiber laser high quality cuts at a large range of speeds (ranging from 2000 to 3800 mm/min) which has been obtained for the 2.3mm Sheet of SS400. 2kW power Fiber laser cut was able to max. 20mm sheets of SS400 (speed range from 650 to 850 mm/min). Fiber laser cutting used in conventional hole nozzle could cut 12mm SS400 but used in special dual cutting nozzle could cut 20mm SS400.

Keywords

References

  1. Powell, J., Al-Mashikihi, S. O., Kaplan, A. F. H., and Voisey, K. T., 2011, "Fibre Laser Cutting of Thin Section Mild Steel : An Explanation of the 'Striation Free' Effect," Optics and Lasers in Engineering, Vol. 49, No. 8, pp. 1069-1075.
  2. Mahrle, A., Lutke, M., and Beyer, E., 2010, "Fiber Laser Cutting: Beam Absorption Characteristics and Gas-free Remote Cutting," Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, Vol. 224, pp. 1007-1018.
  3. Sobih, M., Crouse, P. L., and Li, L., 2008, "Striationfree Fibre Laser Cutting of Mild Steel Sheets," Applied Physics A Materials Science & Processing, Vol. 90, No. 1, pp. 171-174.
  4. Namgoong, O. M., Oh, S. J., and Han, Y. H., 2008, "Application of Low Power Fiber Laser for Thin Plate Cutting," proceedings of KSLP, pp. 28-34.
  5. Ahn, D. G., Byun, K. W., and Yoo, Y. T., 2007, "Effects of an Auto-tracking of the Focal Distance on the Quality of the Cut Part in the Laser Cutting of a Low Carbon Sheet," The Journal of Manufacturing Engineering & Technology, Vol. 16, No. 4, pp. 101-107.
  6. Kaminski, D., 2011, "Laser Marking: How to Choose the Best Laser for Your Marking Application," Journal of Laser Focus World, 2011/04, pp. 12.
  7. Kanaoka, M., 2000, Laser Process Engineering, Korea Industrial Information Center, korea.
  8. Dohnke, I., Peter, D., Comps, J., Sprunk, T., and Heiniger, K. C., 2004, "Modelling of Supersonic Gas Flow of Nozzles for Laser Cutting Systems," Laser Assisted Net Shape Engineering, Vol. 4, pp. 1025-1031.
  9. Oh, Y. S., Shin, H. J., Yang, Y. S., Hwang, C, Y., and Yoo, Y. T., 2011, "A Study on the Fiber Laser Welding of Ultra-low Carbon Interstitial Free Steel of Automotive," The Journal of Manufacturing Engineering & Technology, Vol. 20, No. 3, pp. 342-349.
  10. ROFIN-SINAR Laser GmbH, 2007, The Slab Principle, A Fact Book for the Most Advanced CO2 Laser in the World, pp. 16-18.
  11. ROFIN-SINAR Laser GmbH, 2002, Process Fundamental of Industrial Laser Welding and Cutting, pp. 9.