DOI QR코드

DOI QR Code

The Reluctance Torque Estimate by Linkage Flux Calculation of IPMSM

IPMSM의 쇄교자속 계산을 통한 릴럭턴스 토크 산정

  • Cho, Gyu-Won (Dept. of Electrical Engineering, Changwon National University) ;
  • Kim, Cheol-Min (Dept. of Electrical Engineering, Changwon National University) ;
  • Lee, Jung-Gyu (Dept. of Electrical Engineering, Changwon National University) ;
  • Kim, Gyu-Tak (Dept. of Electrical Engineering, Changwon National University)
  • 조규원 (창원대학교 공대 전기공학과) ;
  • 김철민 (창원대학교 공대 전기공학과) ;
  • ;
  • 김규탁 (창원대학교 공대 전기공학과)
  • Received : 2012.09.14
  • Accepted : 2013.01.16
  • Published : 2013.02.01

Abstract

Classically, reluctance torque of IPMSM(Interior Permanent Magnet Synchronous Motor) by using inductance according to current phase angle generates an error. This error is affected by total torque. From current phase angle $0^{\circ}$ to large errors will occur, because reluctance torque include current phase angle. But, reluctance torque from steady-state voltage equation of IPMSM is represented by linkage flux. So, reluctance torque is unrelated to the current phase angle formula can be derived. In this paper, operating torque was analyzed by d, q-axis linkage flux of IPMSM and reluctance torque to perform calculations reduced the error of the total torque calculation.

Acknowledgement

Supported by : 한국연구재단

References

  1. T. J. E. Miller, "Brushless Permanent-Magnet and Reluctance Motor Drives", Clarendon Press.Oxford, pp. 11-19, 1989.
  2. Morimoto, S. Takeda, Y. Hirasa, T. Taniguchi, K. "Expansion of operating limits for permanent magnet motor by current vector control considering inverter capacity", IEEE Trans. on Industry Applications, vol. 26, no. 5. pp. 866-871, 1990.
  3. M. Jovanovic. "Sensorless control of synchronous reluctance motor." Ph. D. thesis. University of New 1997.
  4. V.B. Honsinger."The inductance Ld and Lq of reluctance machines." IEEE Trans. on Power Apparatus Systems, vol. 90, no. 1, pp. 298-304, 1970.
  5. Jianyi Chen, Chemmangot V. nayar and Longya Xu, "Design and Finite-Element Analysis of an Outer-Rotor Permanenet-Magnet Generator for Directly Coupled Wind Tubines," IEEE Trans. on Magnetics, vol 36, no. 5, pp. 3802-3809, 2000. https://doi.org/10.1109/20.908378
  6. S. Morimoto, M. Sanada and Y. Taketa, Wide-Speed Operation of interior Permanent Magnet Synchronous Motors with High-Performance Current Regulator," IEEE Trans. on Industry Applications, vol. 30, no. 4, pp. 920-926, 1994. https://doi.org/10.1109/28.297908
  7. T. M. Jahns, G. B. Kliman and T. W. Neumann, "Interior Permanent-Magnet Synchronous Motor for Adjustable-Speed Drive", IEEE Trans. on Industry Applications, vol. 22, no.4, pp. 738-747, 1986. https://doi.org/10.1109/TIA.1986.4504786
  8. Rahman, K. M, Hiti, S. "Identification of machine parameters of a synchronous motor," IEEE Trans. on Industry Applications, vol. 41, no. 2, pp. 557-565, 2005. https://doi.org/10.1109/TIA.2005.844379
  9. Sadowski N, Lajoie-Mazenc M, Bastos J.P.A, erreira da Luz M.V, Kuo-Peng P "Evaluation and analysis of iron losses in electrical machines using the rain-flow method", IEEE Trans. on Magnetics, vol.36, no.4, pp. 1923-1926, 2000. https://doi.org/10.1109/20.877823