DOI QR코드

DOI QR Code

Influence of Carbide Formation on Tensile and Fatigue Properties of Carburized Steels

  • Yu, Eunji ;
  • Jung, Heejong ;
  • Kim, Kun-Su ;
  • Kim, Eui-Jun ;
  • Kim, Jongryoul
  • Received : 2013.06.11
  • Accepted : 2013.06.14
  • Published : 2013.06.30

Abstract

The influence of carbide formation on mechanical properties has been investigated in carburized steels. Through controlled diffusion and precipitation processes, the morphologies of carbides could be changed and then fine, networked, and spherical shapes at carburized layers were obtained. These morphological changes affected tensile and bending fatigue properties of the steel. The fine and the spherical carbides acted as resistance sites against crack propagation, which improved the mechanical properties. However, the networked carbides deteriorated the properties because the cracks propagated along the boundaries of them. These results indicate that the morphological control of carbides is one of important keys to improve the mechanical properties.

Keywords

Carburized steel;Carburization;Carbides;Tensile properties;Bending fatigue property

References

  1. Akita M and Tokaji K (2006) Effect of carburizing on notch fatigue behaviour in AISI 316 austenitic stainless steel. Surf. Coat. Technol. 200, 6073-6078. https://doi.org/10.1016/j.surfcoat.2005.09.018
  2. An X, Cawley J, Rainforth W M, and Chen L (2003) A study of internal oxidation in carburized steels by glow discharge optical emission spectroscopy and scanning electron microscopy. Spectrochim. Acta Part B At Spectrosc. 85, 689-698.
  3. Chen F S and Wang K L (2000) Super-carburization of low alloy steel and low carbon steel by fluidized-bed furnaces. Surf. Coat. Technol. 132, 36-44. https://doi.org/10.1016/S0257-8972(00)00728-3
  4. Elkholy A (1983) Case depth requirements in carburized gears. Wear 88, 233-244. https://doi.org/10.1016/S0043-1648(83)80011-8
  5. Erdogan M and Tekeli S (2003) The effect of martensite volume fraction and particle size on the tensile properties of a surface-carburized AISI 8620 steel with a dual-phase core microstructure. Mater. Charac. 49, 445-454.
  6. Farfana S, Rubio-Gonzalezb C, Cervantes-Hernandezb T, and Mesmacque G (2004) High cycle fatigue, low cycle fatigue and failure modes of a carburized steel. Int. J. Fatigue 26, 673-678. https://doi.org/10.1016/j.ijfatigue.2003.08.022
  7. Liu L D and Chen F S (2004) Super-carburization of low alloy steel in a vacuum furnace. Surf. Coat. Technol. 183, 233-238. https://doi.org/10.1016/j.surfcoat.2003.08.079
  8. Michal G M, Ernst F, Kahn H, Cao Y, Oba F, Agarwal N, and Heuer A H (2006) Carbon supersaturation due to paraequilibrium carburization: stainless steels with greatly improved mechanical properties. Acta Mater. 54, 1597-1606. https://doi.org/10.1016/j.actamat.2005.11.029
  9. Parrish G (1999) Carburizing: Microstructures and Properties (ASM International, Materials Park, OH).
  10. Tokaji K, Kohyama K, and Akita M (2004) Fatigue behaviour and fracture mechanism of a 316 stainless steel hardened by carburizing. Int. J. Fatigue 26, 543-551. https://doi.org/10.1016/j.ijfatigue.2003.08.024