DOI QR코드

DOI QR Code

Vibration control laws via shunted piezoelectric transducers: A review

  • Qureshi, Ehtesham Mustafa ;
  • Shen, Xing ;
  • Chen, JinJin
  • Received : 2013.12.19
  • Accepted : 2014.01.20
  • Published : 2014.03.30

Abstract

Attaching a piezoelectric transducer to a vibrating structure, and shunting it with an electric circuit, gives rise to different passive, semi-passive, and semi-active control techniques. This paper attempts to review the research related to structural vibration control, via passive, semi-passive, and semi-active control methods. First, the existing electromechanical modeling is reviewed, along with the modeling methods. These range from lumped parameters, to distributed parameters modeling of piezostructural systems shunted by electrical networks. Vibration control laws are then discussed, covering passive, semi-passive, and semi-active control techniques, which are classified according to whether external power is supplied to the piezoelectric transducers, or not. Emphasis is placed on recent articles covering semi-passive and semi-active control techniques, based upon switched shunt circuits. This review provides the necessary background material for researchers interested in the growing field of vibration damping and control, via shunted piezostructural systems.

Keywords

Damping;Piezoelectric;Shunt;Switch

References

  1. Hopkins, M.A., Henderson, D.A., Moses, R.W., Ryall, T., Zimcik, D.G., and Spangler, R.L., "Active vibrationsuppression systems applied to twin-tail buffering", Proc. SPIE Smart Structures and Materials: Industrial and Commercial Application of Smart Structures Technologies, Vol. 3326, issue, 1998, pp. 27-33. DOI:10.1117/12.310663. https://doi.org/10.1117/12.310663
  2. Simpson, J., and Schweiger, J., "Industrial approach to piezoelectric damping of large fighter aircraft components", Proc. SPIE Smart Structures and Materials: Industrial and Commercial Application of Smart Structures Technologies, Vol. 3326, issue, 1998, pp. 34-46. DOI:10.1117/12.310669. https://doi.org/10.1117/12.310669
  3. Kim, S., Han, C., and Yun, C., "Improvement of aeroelastic stability of hingeless helicopter rotor blade by passive piezoelectric damping", Proc. SPIE Smart Structures and Materials: Passive Damping and Isolation, Vol. 3672, issue, 1999, pp. 131-141. DOI:10.1117/12.349776. https://doi.org/10.1117/12.349776
  4. Wu, S., Turner, T.L., and Rizzi, S.A., "Piezoelectric shunt vibration damping of an F-15 panel under high-acoustic excitation", Proc. SPIE Smart Structures and Materials: Damping and Isolation, Vol. 3989, issue, 2000, pp. 276-287. DOI:10.1117/12.384568. https://doi.org/10.1117/12.384568
  5. Sheta, E.F., and Moses, R.W., "Active smart material control system for buffet alleviation", Journal of Sound and Vibration, Vol. 292, Issue 3-5, 2006, pp. 854-868. DOI: 10.1016/j.jsv.2005.09.002. https://doi.org/10.1016/j.jsv.2005.09.002
  6. Forward, R.L., "Electronic damping of vibrations in optical structures", Applied Optics, Vol.18, Issue 5, 1979, pp. 690-697. DOI: 10.1364/AO.18.000690. https://doi.org/10.1364/AO.18.000690
  7. Hagood, N.W., Chung, W.H., and von Flotow, A., "Modelling of piezoelectric actuator dynamics for active structural control", Journal of Intelligent Material Systems and Structures, Vol. 1, Issue 3, 1990, pp. 327-354. DOI: 10.1177/1045389X9000100305. https://doi.org/10.1177/1045389X9000100305
  8. Hagood, N.W., and Crawley, E.F., "Experimental investigations of passive enhancement of damping space structures", Journal of Guidance, Control and Dynamics, Vol. 14, Issue 6, 1991, pp. 1100-1109. DOI: 10.2514/3.20763. https://doi.org/10.2514/3.20763
  9. Hagood, N.W., and von Flotow, A., "Damping of structural vibrations with piezoelectric materials and passive electrical networks", Journal of Sound and Vibration, Vol. 146, Issue 2, 1991, pp. 243-268. DOI: 10.1016/0022-460X(91)90762-9. https://doi.org/10.1016/0022-460X(91)90762-9
  10. Hollkamp, J.J., "Multimodal passive vibration suppression with piezoelectric materials and resonant shunts", Journal of Intelligent Material Systems and Structures, Vol. 5, Issue 1, 1994, pp. 49-56. DOI: 10.1177/1045389X9400500106. https://doi.org/10.1177/1045389X9400500106
  11. Law, H.H., Rossiter, P.L., Simon, G.P., and Koss, L.L., "Characterization of mechanical vibration damping by piezoelectric materials", Journal of Sound and Vibration, Vol. 197, Issue 4, 1996, pp. 489-513. DOI:10.1006/jsvi.1996.0544. https://doi.org/10.1006/jsvi.1996.0544
  12. Behrens, S., Moheimani, S.O.R., and Fleming, A.J., "Multiple mode current flowing passive piezoelectric shunt controller", Journal of Sound and Vibration, Vol. 266, Issue 5, 2003, pp. 929-942. DOI: 10.1016/S0022-460X(02)01380-9. https://doi.org/10.1016/S0022-460X(02)01380-9
  13. Dong, X.J., Meng, G., and Peng, J.C., "Vibration control of piezoelectric smart structures based on system identification technique: Numerical simulation and experimental study", Journal of Sound and Vibration, Vol. 297, Issue 3-5, 2006, pp. 680-693. DOI: 10.1016/j.jsv.2006.04.021. https://doi.org/10.1016/j.jsv.2006.04.021
  14. Silva, S.D., Junior, V.L., and Brennan, M.J., "Design of a control system using linear matrix inequalities for the active vibration control of a plate", Journal of Intelligent Material Systems and Structures, Vol. 17, Issue 1, 2006, pp. 81-93. DOI:10.1177/1045389X06056341. https://doi.org/10.1177/1045389X06056341
  15. Qiu, Z.C., Han, J.D., Zhang, X.M., Wang, Y.C., and Wu, Z.W., "Active vibration control of a flexible beam using a non-collocated acceleration sensor and piezoelectric patch actuator", Journal of Sound and Vibration, Vol. 326, Issue 3-5, 2009, pp. 438-455. DOI: 10.1016/j.jsv.2009.05.034. https://doi.org/10.1016/j.jsv.2009.05.034
  16. Sunar, M., and Rao, S.S., "Recent advances in sensing and control of flexible structures via piezoelectric materials technology", Applied Mechanics Reviews, Vol. 52, Issue 1, 1999, pp. 1-16. DOI:10.1115/1.3098923. https://doi.org/10.1115/1.3098923
  17. Tang, J., Liu, Y., and Wang, K.W., "Semiactive and active-passive hybrid structural damping treatments via piezoelectric materials", Shock and Vibration Digest, Vol. 32, Issue 3, 2000, pp. 189- 200. DOI:10.1177/058310240003200302. https://doi.org/10.1177/058310240003200302
  18. Benjeddou, A., "Advances in piezoelectric finite element modeling of adaptive structural elements: a survey", Computers & Structures, Vol. 76, Issue 1-3, 2000, pp. 347-363. DOI: 10.1016/S0045-7949(99)00151-0. https://doi.org/10.1016/S0045-7949(99)00151-0
  19. Benjeddou, A., "Advances in hybrid active-passive vibration and noise control via piezoelectric and viscoelastic constrained layer treatments", Journal of Vibration and Control, Vol. 7, Issue 4, 2001, pp. 565-602. DOI: 10.1177/107754630100700406. https://doi.org/10.1177/107754630100700406
  20. Trindade, M.A., and Benjeddou, A., "Hybrid active-passive damping treatments using viscoelastic and piezoelectric materials: Review and Assessment", Journal of Vibration and Control, Vol. 8, Issue 6, 2002, pp. 699-745. DOI: 10.1177/1077546029186. https://doi.org/10.1177/1077546029186
  21. Moheimani, S.O.R., "A survey of recent innovations in vibration damping and control using shunted piezoelectric transducers", IEEE Transactions on Control Systems Technology, Vol. 11, Issue 4, 2003, pp. 482-494. DOI:10.1109/TCST.2003.813371. https://doi.org/10.1109/TCST.2003.813371
  22. Sodano, H.A., Inman, D.J., and Park, G., "A review of power harvesting from vibration using piezoelectric materials", The Shock and Vibration Digest, Vol. 36, Issue 3, 2004, pp. 197-205. DOI: 10.1177/0583102404043275. https://doi.org/10.1177/0583102404043275
  23. Anton, S.R., and Sodano, H.A., "A review of power harvesting using piezoelectric materials (2003-2006)", Smart Materials and Structures, Vol. 16, Issue 3, 2007, pp. R1-R21. DOI:10.1088/0964-1726/16/3/R01. https://doi.org/10.1088/0964-1726/16/3/R01
  24. Wang, Y., and Inman, D.J., "A survey of control strategies for simultaneous vibration suppression and energy harvesting via piezoceramics", Journal of Intelligent Material Systems and Structures, Vol. 23, Issue 18, 2012, pp. 2021-2037. DOI:10.1177/1045389X12444485. https://doi.org/10.1177/1045389X12444485
  25. Song, G., Sethi, V., and Li, H-N., "Vibration control of civil structures using piezoceramic smart materials: A review", Journal of Engineering Structures, Vol. 28, Issue 11, 2006, pp. 1513-1524. DOI:10.1016/j.engstruct.2006.02.002. https://doi.org/10.1016/j.engstruct.2006.02.002
  26. Fisco, N.R., and Adeli, H., "Smart structures: Part I- Active and semi-active control", Scientia Iranica Transactions A: Civil Engineering, Vol. 18, Issue 3, 2011, pp. 275-284. DOI:10.1016/j.scient.2011.05.034. https://doi.org/10.1016/j.scient.2011.05.034
  27. Fisco, N.R., and Adeli, H., "Smart structures: Part II- Hybrid control systems and control strategies", Scientia Iranica Transactions A: Civil Engineering, Vol. 18, Issue 3, 2011: pp. 285-295. DOI: 10.1016/j.scient.2011.05.035. https://doi.org/10.1016/j.scient.2011.05.035
  28. Corr, L.R., and Clark, W.W., "Comparison of lowfrequency piezoelectric switching shunt techniques for structural damping", Smart Structures and Materials, Vol. 11, Issue 3, 2002, pp. 370-376. DOI:10.1088/0964-1726/11/3/307. https://doi.org/10.1088/0964-1726/11/3/307
  29. Davis, C.L., and Lesieutre, G.A., "An actively tuned solid-state vibration absorber using capacitive shunting of piezoelectric stiffness", Journal of Sound and Vibration, Vol. 232, Issue 3, 2000, pp. 601-617. DOI:10.1006/jsvi.1999.2755. https://doi.org/10.1006/jsvi.1999.2755
  30. Larson G.D., Rogers, P.H., and Munk, W., "State switched transducers: A new approach to high-power, lowfrequency, underwater projectors", Journal of Acoustical Society of America, Vol. 103, Issue 3, 1998, pp. 1428-1441. DOI:10.1121/1.421283. https://doi.org/10.1121/1.421283
  31. Badel, A., Lagache, M., and Guyomar, D., et al., "Finite element and simple lumped modeling for flexural nonlinear semi-passive damping", Journal of Intelligent Material Systems and Structures, Vol. 18, Issue 7, 2007: pp. 727-742. DOI: 10.1177/1045389X06069447. https://doi.org/10.1177/1045389X06069447
  32. Cunefare, K.A., "State-switched absorber for vibration control of point-excited beams", Journal of Intelligent Material Systems and Structures, Vol. 13, Issue 2-3, 2002, pp. 97-105. DOI: 10.1177/104538902761402495. https://doi.org/10.1177/104538902761402495
  33. Niederberger, D., Fleming, A., Moheimani, S.O.R., and Morari, M., "Adaptive multi-mode resonant piezoelectric shunt damping", Smart Materials and Structures, Vol. 13, Issue 5, 2004, pp. 1025-1035. DOI:10.1088/0964-1726/13/5/007. https://doi.org/10.1088/0964-1726/13/5/007
  34. Lallart, M., Harari, S., and Petit, L., et al., "Blind switch damping (BSD): A self-adaptive semi-active damping technique", Journal of Sound and Vibration, Vol. 328, No. 1-2, 2009, pp. 29-41. DOI:10.1016/j.jsv.2009.07.030. https://doi.org/10.1016/j.jsv.2009.07.030
  35. Guyomar, D., Richard, C., and Mohammadi, S., "Damping behavior of semi-passive vibration control using shunted piezoelectric materials", Journal of Intelligent Material Systems and Structures, Vol. 19, Issue 8, 2008, pp. 977-985. DOI: 10.1177/1045389X07083122. https://doi.org/10.1177/1045389X07083122
  36. Ji, H., Qiu, J., Badel, A., and Zhu, K., "Semiactive vibration control of a composite beam using an adaptive SSDV approach", Journal of Intelligent Material Systems and Structures, Vol. 20, Issue 4, 2009, pp. 401-412. DOI:10.1177/1045389X08095182. https://doi.org/10.1177/1045389X08095182
  37. Ji, H., Qiu, J., Zhu, K., and Badel, A., "Two-mode vibration control of a beam using nonlinear synchronized switching damping based on the maximization of converted energy", Journal of Sound and Vibration, Vol. 329, Issue 14, 2010, pp. 2751-2767. DOI:10.1016/j.jsv.2010.01.012 https://doi.org/10.1016/j.jsv.2010.01.012
  38. Erturk, A., and Inman, D.J., "Issues in mathematical modeling of piezoelectric energy harvesters", Smart Materials and Structures, Vol. 17, Issue 6, 2008, pp. 065016 (14pp). DOI:10.1088/0964-1726/17/6/065016. https://doi.org/10.1088/0964-1726/17/6/065016
  39. Guyomar, D., Lallart, M., and Monnier, T., "Stiffness tuning using a low-cost semiactive nonlinear technique", IEEE/ ASME Transactions on Mechatronics, Vol. 13, Issue 5, 2008, pp. 604-607. DOI: 10.1109/TMECH.2008.2004411. https://doi.org/10.1109/TMECH.2008.2004411
  40. Guyomar, D., Richard, C., and Mohammadi, S., "Damping behavior of semi-passive vibration control using shunted piezoelectric materials", Journal of Intelligent Material Systems and Structures, Vol. 19, Issue 8, 2008, pp. 977-985. DOI: 10.1177/1045389X07083122. https://doi.org/10.1177/1045389X07083122
  41. Caruso, G., "A critical analysis of electric shunt circuits employed in piezoelectric passive vibration damping", Smart Materials and Structures, Vol. 10, Issue 5, 2001, pp. 1059- 1068. DOI:10.1088/0964-1726/10/5/322. https://doi.org/10.1088/0964-1726/10/5/322
  42. Hollkamp, J.J., and Starchville, J.T.F., "A self-tuning piezoelectric vibration absorber", Journal of Intelligent Material Systems and Structures, Vol. 5, Issue 4, 1994, pp. 559-566. DOI:10.1177/1045389X9400500412. https://doi.org/10.1177/1045389X9400500412
  43. Konak, M.J., Powlesland, I.G., van der Velden, S.P., and Galea, S.P., "A self-powered discrete time piezoelectric vibration damper". Proc. SPIE Conf. Integrated Systems: SPIE, Vol. 3241, issue, 1997, pp. 270-279. DOI:10.1117/12.293506. https://doi.org/10.1117/12.293506
  44. Richard, C., Guyomar, D., Audigier, D., and Ching, G., "Semi-passive damping using continuous switching of a piezoelectric device", In Proc. SPIE Conf. Passive Damping Isolation, Newport Beach, CA, Vol. 3672, issue, 1999, pp. 104-111. DOI:10.1117/12.349773. https://doi.org/10.1117/12.349773
  45. Tang, J., and Wang, K.W., "Active-passive hybrid piezoelectric networks for vibration control: Comparisons and improvement", Smart Materials and Structures, Vol. 10, No. 4, 2001, pp. 794-806. DOI:10.1088/0964-1726/10/4/325. https://doi.org/10.1088/0964-1726/10/4/325
  46. Thorp, O., Ruzzene, M., and Baz, A., "Attenuation and localization of wave propagation in rods with periodic shunted piezoelectric patches". Smart Materials and Structures, Vol. 10, Issue 5, 2001, pp. 979-989. DOI:10.1088/0964-1726/10/5/314. https://doi.org/10.1088/0964-1726/10/5/314
  47. Wu, S.Y., and Bicos, A.S., "Structural vibration damping experiments using improved piezoelectric shunts", In Proc. SPIE Conf. Passive Damping Isolation: SPIE, Vol. 3045, issue, 1997, pp. 40-50. DOI:10.1117/12.274217. https://doi.org/10.1117/12.274217
  48. Johnson, C.D., "Design of passive damping systems", Journal of Mechanical Design, Transactions of the ASME, Vol. 117, issue B, 1995, pp.171-176. DOI:10.1115/1.2836451. https://doi.org/10.1115/1.2836451
  49. Wu, S.Y., "Piezoelectric shunts with a parallel R-L circuit for structural damping and vibration control", In Proc. SPIE Symp. Smart Structures Materials Passive Damping Isolation, May 1, Volume 2720, issue, 1996, pp. 259-269. DOI:10.1117/12.239093. https://doi.org/10.1117/12.239093
  50. dell'Isola, F., Maurini, C., and Porfiri, M., "Passive damping of beam vibrations through distributed electric networks and piezoelectric transducers: prototype design and experimental validation", Smart Materials and Structures, Vol. 13, Issue 2, 2004, pp. 299- 308. DOI:10.1088/0964-1726/13/2/008. https://doi.org/10.1088/0964-1726/13/2/008
  51. Ramaratnam, A., and Jalili, N., "A switched stiffness approach for structural vibration control: Theory and realtime implementation", Journal of Sound & Vibration, Vol. 291, No. 1-2, 2006, pp. 258-274. 10.1016/j.jsv.2005.06.012. https://doi.org/10.1016/j.jsv.2005.06.012
  52. Clark, W.W., "Semi-active vibration control with piezoelectric materials as variable stiffness actuators", Smart Structures and Materials 1999: Passive Damping and Isolation, Vol. 3672, issue, 1999, pp. 123-130. DOI:10.1117/12.349775. https://doi.org/10.1117/12.349775
  53. Clark, W.W., "Vibration control with state-switched piezoelectric materials", Journal of Intelligent Material Systems and Structures, Vol. 11, Issue 4, 2000, pp. 263-271. DOI: 10.1106/18CE-77K4-DYMG-RKBB. https://doi.org/10.1106/18CE-77K4-DYMG-RKBB
  54. Corr, L.R., and Clark, W.W., "Energy dissipation analysis of piezoceramic semi-active vibration control", Journal of Intelligent Material Systems and Structures, Vol. 12, Issue 11, 2001, pp. 729-736. DOI: 10.1177/104538901400438028. https://doi.org/10.1177/104538901400438028
  55. Holdhusen, M.H., and Cunefare, K.A., "Damping effects on the state-switched absorber used for vibration suppression", Journal of Intelligent Material Systems and Structures, Vol.14, Issue 9, 2003, pp. 551-561. DOI: 10.1177/104538903036919. https://doi.org/10.1177/104538903036919
  56. Corr, L.R., and Clark, W.W., "A novel semi-active multi-modal vibration control law for a piezoceramic actuator", Journal of Vibration and Acoustics, Vol. 125, Issue 2, 2003, pp. 214-222. DOI:10.1115/1.1547682. https://doi.org/10.1115/1.1547682
  57. Richard, C., Guyomar, D., and Audigier, D., et al., "Enhanced semi-passive damping using continuous switching of a piezoelectric device on an inductor", In Proc. of SPIE Smart Structures and Materials 2000: Damping and Isolation, Vol. 3989, issue, 2000, pp. 288-299. DOI:10.1117/12.384569. https://doi.org/10.1117/12.384569
  58. Ducarne, J., Thomas, O., and Deu, J-F., "Structural vibration reduction by switch shunting of piezoelectric elements: modeling and optimization", Journal of Intelligent Material Systems and Structures, Vol. 21, Issue 8, 2010, pp. 797-816. DOI: 10.1177/1045389X10367835. https://doi.org/10.1177/1045389X10367835
  59. Petit, L., Lefeuvre, E., Richard, C., and Guyomar, D., "A broadband semi passive piezoelectric technique for structural damping", Proceedings of SPIE International Symposium on Smart Structure Materials: Damping and Isolation, Vol. 5386, issue, 2004, pp. 414-425. DOI:10.1117/12.532716. https://doi.org/10.1117/12.532716
  60. Guyomar, D. and Badel, A., "Nonlinear semi-passive multimodal vibration damping: An efficient probabilistic approach", Journal of Sound and Vibration, Vol. 294, Issue 1-2, 2006, pp.249-268. DOI: 10.1016/j.jsv.2005.11.010. https://doi.org/10.1016/j.jsv.2005.11.010
  61. Lefeuvre, E., Badel, A., and Petit, L., et al., "Semipassive piezoelectric structural damping by synchronized switching on voltage sources", Journal of Intelligent Material Systems and Structures, Vol. 17, Issue 8-9, 2006, pp. 653-660. DOI: 10.1177/1045389X06055810. https://doi.org/10.1177/1045389X06055810
  62. Badel, A., Sebald, G., and Guyomar, D., et al., "Piezoelectric vibration control by synchronized switching on adaptive voltage sources: towards wideband semi-active damping", Journal of the Acoustical Society of America, Vol. 119, No. 5, 2006, pp. 2815- 2825. DOI: 10.1121/1.2184149. https://doi.org/10.1121/1.2184149
  63. Lallart, M., Badel, A., and Guyomar, D., "Nonlinear semi-active damping using constant or adaptive voltage sources: a stability analysis", Journal of Intelligent Material Systems and Structures, Vol. 19, Issue 10, 2008, pp. 1131-1142. DOI: 10.1177/1045389X07083612. https://doi.org/10.1177/1045389X07083612
  64. Guyomar, D., Richard, C., and Mohammadi, S., "Semi-passive random vibration control based on statistics", Journal of Sound and Vibration, Vol. 307, Issue 3-5, 2007, pp. 818-833. DOI:10.1016/j.jsv.2007.07.008. https://doi.org/10.1016/j.jsv.2007.07.008
  65. Lallart, M., Lefeuvre, E., and Richard, C., et al., "Selfpowered circuit for broadband, multimodal piezoelectric vibration control", Sensors and Actuators A: Physical, Vol. 143, Issue 2, 2008, pp. 377-382. DOI: 10.1016/j.sna.2007.11.017. https://doi.org/10.1016/j.sna.2007.11.017
  66. Neubauer, M., and Wallaschek, J., "Analytical and experimental investigation of the frequency ratio and switching law for piezoelectric switching techniques", Smart Materials and Structures, Vol.17, Issue 3, 2008, pp. 035003 (9pp). DOI:10.1088/0964-1726/17/3/035003. https://doi.org/10.1088/0964-1726/17/3/035003
  67. Harari, S., Richard, C., and Gaudiller, L., "New semiactive multi-modal vibration control using piezoceramic components", Journal of Intelligent Material Systems and Structures, Vol. 20, Issue 13 , 2009, pp. 1603-1613. DOI: 10.1177/1045389X09102561. https://doi.org/10.1177/1045389X09102561
  68. Ji, H., Qiu, J., and Badel, A., et al., "Semi-active vibration control of a composite beam by adaptive synchronized switching on voltage sources based on LMS algorithm", Journal of Intelligent Material Systems and Structures, Vol. 20, Issue 8, 2009, pp. 939-947. DOI: 10.1177/1045389X08099967. https://doi.org/10.1177/1045389X08099967
  69. Ji, H., Qiu, J., and Zhu, K., et al., "Multi-modal vibration control using a synchronized switch based on a displacement switching threshold", Smart Materials and Structures, Vol. 18, Issue 3, 2009, pp. 035016 (8 pp). DOI:10.1088/0964-1726/18/3/035016. https://doi.org/10.1088/0964-1726/18/3/035016
  70. Ji, H., Qiu, J., and Zhu, K.J., "Vibration control of a composite beam using self-sensing semi-active approach", Chinese Journal of Mechanical Engineering. Vol. 23, Issue *, 2010, pp. 663-670. DOI: 10.3901/CJME.2010.0. https://doi.org/10.3901/CJME.2010.05.663
  71. Ji, H., Qiu, J., and Xia, P., "Analysis of energy conversion in two-mode vibration control using synchronized switch damping approach", Journal of Sound and Vibration, Vol. 330, Issue 15, 2011, pp. 3539-3560. DOI: 10.1016/j.jsv.2011.03.004. https://doi.org/10.1016/j.jsv.2011.03.004
  72. Ji, H., Qiu, J., Xia, P., and Inman, D., "Analysis of energy conversion in switched-voltage control with arbitrary switching frequency", Sensors and Actuators A: Physical, Vol. 174, issue, 2012, pp. 162-172. DOI:10.1016/j.sna.2011.11.004. https://doi.org/10.1016/j.sna.2011.11.004
  73. Ji, H., Qiu, J., Cheng, J., and Inman, D., "Application of a Negative Capacitance Circuit in Synchronized Switch Damping Techniques for Vibration Suppression", Journal of Vibration and Acoustics, Vol. 133, Issue 4, 2011, pp. 041015- 1-10. DOI:10.1115/1.4003146. https://doi.org/10.1115/1.4003146
  74. Cheng, J., Ji, H., Qiu, J., and Takagi, T., "Semi-active vibration suppression by a novel synchronized switch circuit with negative capacitance", International Journal of Applied Electromagnetics and Mechanics, Vol. 37, Issue 4, 2011, pp. 291-308. DOI:10.3233/JAE-2011-1402. https://doi.org/10.3233/JAE-2011-1402
  75. Ji, H., Qiu, J., Xia, P., and Nie, H., "Energy conversion and performance of switched-voltage control based on negative capacitance with arbitrary switching frequency". Smart Materials and Structures, Vol. 21, Issue 12, 2012, pp.125010 (11pp). DOI:10.1088/0964-1726/21/12/125010. https://doi.org/10.1088/0964-1726/21/12/125010
  76. Mokrani, B., Rodrigues, G., Ioan, B., Bastaits, R., and Preumont, A., "Synchronized switch damping on inductor and negative capacitance", Journal of Intelligent Material Systems and Structures, Vol. 23, No. 18, 2012, pp. 2065-2075. DOI:10.1177/1045389X11433493. https://doi.org/10.1177/1045389X11433493
  77. Han, X., Neubauer, M., and Wallaschek, J., "Improved piezoelectric switch shunt damping technique using negative capacitance", Journal of Sound and Vibration, Vol. 332, Issue 1, 2013, pp. 7-16. DOI: 10.1016/j.jsv.2012.08.001. https://doi.org/10.1016/j.jsv.2012.08.001
  78. Qiu, J.H., Ji, H.L., and Shen, H., "Energy harvesting and vibration control using piezoelectric elements and a non-linear approach", In: 18th IEEE international symposium on the applications of ferroelectrics (ISAF), Piscataway, NJ, August, 2009, pp. 23-27. DOI:10.1109/ISAF.2009.5307559. https://doi.org/10.1109/ISAF.2009.5307559
  79. Fleming, A.J., and Moheimani, S.O.R., "Adaptive piezoelectric shunt damping", Smart Materials and Structures, Vol. 12, Issue 1, 2003, pp. 36-48. DOI:10.1088/0964-1726/12/1/305. https://doi.org/10.1088/0964-1726/12/1/305
  80. Qiu, J., Ji, H., and Zhu, K., "Semi-active vibration control using piezoelectric actuators in smart structures", Frontiers of Mechanical Engineering in China, Vol. 4, Issue 3, 2009, pp. 242-251. DOI:10.1007/s11465-009-0068-z. https://doi.org/10.1007/s11465-009-0068-z
  81. Anderson, B.D.O., and Sumeth, V., Network Analysis and Synthesis: A Modern Systems Theory Approach, Englewood Cliffs, NJ, Prentice Hall, 1973.
  82. Edberg, D.L., and Bicos, A.S., "Design and development of passive damping concepts in advanced composite large space structures". In: 36th international SAMPE symposium and exhibition, San Diego, CA, 15-18 April, 1991.
  83. Richard, C., Guyomar, D., and Audigier, D., "An original damping approach using a switched piezoelectric device". In: Proceedings of the 10th international conference on adaptive structures and technologies (ICAST 1999), Paris, France, 11-13 October, 1999, Lancaster, PA, pp 21-28.
  84. Lallart, M., Lefeuvre, E., Richard, C., and Guyomar, D., "Self-powered circuit for broadband, multimodal piezoelectric vibration control", Sensors and Actuators A: Physical, Vol. 143, Issue 2, 2007, pp. 377-382. DOI: 10.1016/j.sna.2007.11.017. https://doi.org/10.1016/j.sna.2007.11.017
  85. Richard, C., Guyomar, D., and Lefeuvre, E., "Selfpowered Electronic Breaker with Automatic Switching by Detecting Maxima or Minima of Potential Difference Between its Power Electrodes", Patent # PCT/FR2005/003000, publication number: WO/2007/063194, 2007.
  86. Niederberger, D., and Morari, M., "An autonomous shunt circuit for vibration damping", Smart Materials and Structure, Vol. 15, Issue 2, 2006, pp. 359-364. DOI:10.1088/0964-1726/15/2/016. https://doi.org/10.1088/0964-1726/15/2/016
  87. Delpero, T., Di Lillo, L., Bergamini, A.E., and Ermanni, P., "Energy harvesting module for the improvement of the damping performance of autonomous synchronized switching on inductance", Journal of Intelligent Material Systems and Structures, Vol. 24, Issue 7, 2012, 837-845. DOI:10.1177/1045389X12463463. https://doi.org/10.1177/1045389X12463463

Cited by

  1. Piezoelectric shunt damping by synchronized switching on negative capacitance and adaptive voltage sources vol.15, pp.4, 2014, https://doi.org/10.5139/IJASS.2014.15.4.396
  2. Shunt Damping Vibration Control Technology: A Review vol.7, pp.5, 2017, https://doi.org/10.3390/app7050494
  3. Vibration Control Design for a Plate Structure with Electrorheological ATVA Using Interval Type-2 Fuzzy System vol.7, pp.7, 2017, https://doi.org/10.3390/app7070707
  4. Adaptive synchronized switch damping on an inductor: a self-tuning switching law vol.26, pp.3, 2017, https://doi.org/10.1088/1361-665X/aa5433
  5. Optimal switch timing for piezoelectric-based semi-active vibration reduction techniques vol.28, pp.16, 2017, https://doi.org/10.1177/1045389X17689934
  6. Power output and efficiency of a negative capacitance and inductance shunt for structural vibration control under broadband excitation vol.16, pp.2, 2015, https://doi.org/10.5139/IJASS.2015.16.2.223
  7. An autonomous synchronized switch damping on inductance and negative capacitance for piezoelectric broadband vibration suppression vol.17, pp.4, 2016, https://doi.org/10.5139/IJASS.2016.17.4.501
  8. Superharmonic vibration and its reduction in SSD control by increase of voltage inversion time vol.27, pp.8, 2018, https://doi.org/10.1088/1361-665X/aacdc5

Acknowledgement

Supported by : NUAA, National Science Foundation of China