DOI QR코드

DOI QR Code

Design and Analysis for Loss Reduction of High-Speed Permanent Magnet Motor using a Soft Magnetic Composite

  • Lee, Sung-Ho (Seonam Regional Division, Korea Institute of Industrial Technology) ;
  • Kim, Yong-Jae (Department of Electrical Engineering, Chosun University) ;
  • Lee, Kyu-Seok (Seonam Regional Division, Korea Institute of Industrial Technology) ;
  • Kim, Sung-Jin (Seonam Regional Division, Korea Institute of Industrial Technology)
  • 투고 : 2015.10.01
  • 심사 : 2015.11.09
  • 발행 : 2015.12.31

초록

Soft magnetic composites (SMCs) are especially suitable for the construction of low-cost, high-performance motors with 3-D magnetic fields. The main advantages of SMCs is that the iron particles are insulated by the surface coating and adhesive used for composite bonding, the eddy-current loss is much lower than that in laminated steels, especially at higher frequencies, and the hysteresis loss becomes the dominant component of core losses. These properties enable machines to operate at higher frequencies, resulting in reduced machine size and weight. In this paper, 3-D topologies are proposed that enable the application of SMCs to effectively reduce losses in high-speed permanent magnet (PM) motors. In addition, the electromagnetic field characteristics of the motor topologies are evaluated and compared using a non-linear finite element method (FEM) based on 3-D numerical analysis, and the feasibility of the motor designs is validated.

과제정보

연구 과제 주관 기관 : Korea Institute of Energy Technology Evaluation and Planning (KETEP)

참고문헌

  1. G. Cvetkovski, L. Petkovska, M. Cundev, and S. Gair, IEEE Trans. Magn. 38, 3165 (2002). https://doi.org/10.1109/TMAG.2002.802402
  2. G. Cvetkovski and L. Petkovska, IEEE Trans. Magn. 44, 3812 (2008). https://doi.org/10.1109/TMAG.2008.2001314
  3. A. Reinap and M. Alakula, IEEE Trans. Magn. 48, 1613 (2012). https://doi.org/10.1109/TMAG.2011.2173566
  4. Y. Shen, Z. Q. Zhu, J. T. Chen, R. P. Deodhar, and A. Pride, IEEE Trans. Magn. 49, 3830 (2013). https://doi.org/10.1109/TMAG.2013.2238511
  5. F. Marignetti and V. D. Colli, IEEE Trans. Magn. 45, 2970 (2009). https://doi.org/10.1109/TMAG.2009.2016415
  6. G. D. Donato, F. G. Capponi, and F. Caricchi, IEEE Trans. Ind. Electron. 60, 4831 (2013). https://doi.org/10.1109/TIE.2012.2225392
  7. T. Ishikawa, S. Sato, S. Takeguchi, and A. Matsuo, IEEE Trans. Magn. 48, 3132 (2012). https://doi.org/10.1109/TMAG.2012.2203333
  8. Y. Huang, J. Zhu, and Y. Guo, IEEE Trans. Magn. 45, 4680 (2009). https://doi.org/10.1109/TMAG.2009.2023065
  9. G. Lei, Y. G. Guo, J. G. Zhu, T. S. Wang, X. M. Chen, and K. R. Shao, IEEE Trans. Magn. 48, 923 (2012). https://doi.org/10.1109/TMAG.2011.2173795
  10. Y. Guo, J. G. Zhu, and J. J. Zhong, IEEE Trans. Magn. 39, 3199 (2003). https://doi.org/10.1109/TMAG.2003.816057
  11. Y. Guo, J. G. Zhu, P. A. Watterson, and W. Wu, IEEE Trans. Ind. Appl. 39, 1696 (2003). https://doi.org/10.1109/TIA.2003.818990
  12. S. Baserrah, K. Rixen, and B. Orlik, J. Magn. 17, 100 (2012). https://doi.org/10.4283/JMAG.2012.17.2.100
  13. C. Goga, P. Lidija, C. Milan, and G. Sinclair, Int. J. Appl. Electromagn. Mecha. 13, 451 (2001).

피인용 문헌

  1. Effect of Geometrical Parameters on Optimal Design of Synchronous Reluctance Motor vol.21, pp.4, 2016, https://doi.org/10.4283/JMAG.2016.21.4.544
  2. Electromagnetic Structure Design Study of Fault-Tolerant Interior Permanent Magnet Machines for Electric Vehicles Using Harmonic Order Shaping vol.21, pp.4, 2016, https://doi.org/10.4283/JMAG.2016.21.4.561
  3. Mechanical Properties of Soft Magnetic Composites at the Temperature of Liquid Nitrogen vol.131, pp.5, 2017, https://doi.org/10.12693/APhysPolA.131.1199