DOI QR코드

DOI QR Code

An alternative method to convert fractured metal ceramic surveyed crown into a complete contour zirconia surveyed crown using CAD-CAM technology under anticancer treatments: a clinical report

항암치료 중인 환자에서 파절된 금속-도재관을 CAD/CAM으로 제작된 complete contour zirconia surveyed crown(완전한 윤곽을 가진 지르코니아 써베이드 전장관) 보철 수복: 증례 보고

  • Lee, Seon-Ki (Department of Prosthodontics, School of Dentistry, Chonnam National University) ;
  • Yang, Hong-So (Department of Prosthodontics, School of Dentistry, Chonnam National University) ;
  • Park, Sang-Won (Department of Prosthodontics, School of Dentistry, Chonnam National University) ;
  • Yun, Kwi-Dug (Department of Prosthodontics, School of Dentistry, Chonnam National University) ;
  • Lim, Hyun-Pil (Department of Prosthodontics, School of Dentistry, Chonnam National University)
  • 이선기 (전남대학교 치의학전문대학원 보철학교실) ;
  • 양홍서 (전남대학교 치의학전문대학원 보철학교실) ;
  • 박상원 (전남대학교 치의학전문대학원 보철학교실) ;
  • 윤귀덕 (전남대학교 치의학전문대학원 보철학교실) ;
  • 임현필 (전남대학교 치의학전문대학원 보철학교실)
  • Received : 2014.10.06
  • Accepted : 2015.03.05
  • Published : 2015.03.31

Abstract

In this clinical report, a simple and convenient conversion of a fractured metal-ceramic surveyed crown into a complete contour zirconia surveyed crown by using computer-aided design and computer-aided manufacturing technology for an existing partial removable dental prosthesis is described. The duplication of the original contours, morphology, and the rest seat of the existing metal-ceramic surveyed crown, into a complete contour zirconia surveyed crown under anticancer treatments were reported.

References

  1. Hansen CA, Russell MM. Making a crown to fit accurately under an existing removable partial denture clasp assembly. J Prosthet Dent 1994;71:2:206-8. https://doi.org/10.1016/0022-3913(94)90034-5
  2. Macpherson JR, Evans DB. Fabricating crowns to fit existing removable partial dentures: an illustration of two techniques. J Prosthodont 1993;2:199-205. https://doi.org/10.1111/j.1532-849X.1993.tb00408.x
  3. Jackson AD, Butler CJ. Fabrication of a new crown and provisional to an existing removable partial denture. J Prosthodont 1995;4:200-4. https://doi.org/10.1111/j.1532-849X.1995.tb00341.x
  4. Elledge DA, Schorr BL. A provisional and new crown to fit into a clasp of an existing removable partial denture. J Prosthet Dent 1990;63:541-4. https://doi.org/10.1016/0022-3913(90)90072-K
  5. Marchack BW, Chen LB, Marchack CB, Futatsuki Y. Fabrication of an all-ceramic abutment crown under an existing removable partial denture using CAD/CAM technology. J Prosthet Dent 2007;98:478-82. https://doi.org/10.1016/S0022-3913(07)60148-6
  6. Yoon TH, Chang WG. The fabrication of a CAD/CAM ceramic crown to fit an existing partial removable dental prosthesis: a clinical report. J Prosthet Dent 2012;108:143-6. https://doi.org/10.1016/S0022-3913(12)60137-1