Monitoring Machining Conditions by Analyzing Cutting-Force Vibration

절삭력 진동 분석에 의한 가공조건 모니터링

  • Received : 2015.03.28
  • Accepted : 2015.08.04
  • Published : 2015.09.01


This paper deals with an experimental technique for monitoring machining conditions by analyzing cutting-force vibration measured at a milling machine. This technique is based on the relationship of the cutting-force vibrations with the feed rate and cutting depth as reported earlier. The measurement system consists of dynamic force transducers and a signal amplifier. The analysis system includes an oscilloscope and a computer with a LabVIEW program. Experiments were carried out at various feed rates and cutting depths, while the rotating speed was kept constant. The magnitude of the cutting force vibration component corresponding to the number of cutting edges multiplied by the frequency of rotation was linearly correlated with the machining conditions. When one condition of machining is known, another condition can be identified by analyzing the cutting-force vibration.


Supported by : 정보통신기술진흥센터


  1. Kim, B. H., Ahn, H. J., Kim, J. O., Yoo, M., Cho, K. J. and Choi, D. S., 2010, "Application of M2M Technology to Manufacturing Systems," Proceedings of ICTC 2010, pp. 519-520.
  2. Jeon, J. H. and Kim, J. O., 2012, "Monitoring of Machining Process by Measuring Vibration of Cutting Forces," Trans. Korean Soc. Noise Vib. Eng., Vol. 22, No. 11, pp. 1106-1112.
  3. Daud, R., Hasfa, N. K., Tomadi, S. H., Hassan, M. A., Kadirgama, K. and Noor, M. M., 2009, "Prediction of Chatter in CNC Machining based on Dynamic Cutting Force for Ball End Milling," Proceedings of the International Multiconference of Engineers and Computer Scientists, pp. 1751-1756.
  4. Huang, S., Tan, K. K., Hong, G. S., Wong, Y. S., 2007, "Cutting Force Control of Milling Machine," Mechatronics, Vol. 17, No. 10, pp. 533-541.
  5. Dolen, M., Kaftanoglu, B. and Lorenz, R. D., 2004, "A Cutting force Estimator for CNC Machining Centers," CIRP Annals-Manufacturing Technology, Vol. 53, No. 1, pp. 313-316.