DOI QR코드

DOI QR Code

Effect of Milled Glass Fibers on Corrosion Resistance of PSC Grout Mortar

초단유리섬유가 PSC 그라우트의 부식저항성능에 미치는 영향

  • Received : 2015.04.22
  • Accepted : 2015.08.17
  • Published : 2015.11.01

Abstract

In this experimental study, effect of milled glass fibers was investigated on corrosion resistance of PSC grout mortar. In order to check whether the mortar mixture with milled glass fibers satisfy the required properties as a PSC grout, time of flow, bleeding and compressive strength measured. The corrosion resistance were investigated through chloride ion migration test, mortar absorption test and surface resistivity measurement. It is confirmed that all proportions with milled glass fibers have better corrosion resistance than that with only OPC binder. Time of flow was reduced but the bleeding was increased to unacceptable level by using milled glass fibers. Consequently, the mix proportion with milled glass fibers for a PSC grout should be modified to have lower water/binder ratio.

Keywords

PSC grout;Permeability;Milled glass fibers;Chloride ion migration

References

  1. ASTM C 1403 (2013), Standard Test Method for Rate of Water Absorption of Masonry Mortars" American Society for Testing and Materials, West Conshohocken.
  2. FM 5-578 (2004), Florida Method of Test for Concrete Resistivity as an Electrical Indicator of its Permeability. Florida Department of Transportation (FDOT).
  3. Korean Standards Association (2014), KS F 2433: Standard test method for bleeding and expansion ratios of grouting mortar.
  4. Kang, H. J., Koh, K. T., Ryu, G. S., Lee, J. H., Park, J. J. (2008) The Strength Characteristics of Cement ZERO Mortar Mixing Waste Glass Powder and Fly Ash as Binder, Proceedings of the Korea Concrete Institute conference-Fall, KCI, 20(2), 649-652.
  5. Kang, H. J., Koh, K. T., Ryu, G. S., Lee, J. H., Park, J. J. (2008) The Strength Characteristics of Cement ZERO Mortar Mixing Waste Glass Powder and Fly Ash as Binder, Proceedings of the Korea Concrete Institute conference-Fall, KCI, 20(2), 649-652.
  6. Kim, J., Moon, J., Shim, J. W., Sim, J., Lee, H., Zi, G. (2014) Durability Properties of a Concrete with Waste Glass Sludge Exposed to Freeze-and-Thaw Condition and de-icing salt, Construction and Building Materials, 66, 398-402. https://doi.org/10.1016/j.conbuildmat.2014.05.081
  7. Kim, J., Yi, J., Zi, G. (2015) Waste Glass Sludge as a partial cement replacement in Mortar, Construction and Building Materials, 75, 242-246. https://doi.org/10.1016/j.conbuildmat.2014.11.007
  8. Korean Standards Association (2004), KS F 4044 : Hydraulic cement grout (Nonshrink).
  9. Lee H.G., Oh H.S., Sim J.S., and Zi G.S. (2013), An Experimental Study on the Multi-Deterioration Resistances of Concrete containing Waste-glass Sludge, Journal of Korean Society of Hazard Mitigation, KOSHAM, 13(2), 67-74.
  10. Nah D. B., Shin H. S., and Nah D.J. (2011), Offshore Wind Power Review, Journal of Energy Engineering, KOSEE, 20(2), 143-153.
  11. NORDTEST METHOD NT BUILD 492, Approved 1999-11
  12. Park, S. B., Lee, B.C., and Kwon, H.S. (2002), Alkali-Silica Reaction of Mortar Containing Waste Glass Aggregates, Journal of the Korea Concrete Institute, KCI, 19(2), 25-33.
  13. Sung J. K., Lee T. J. (2013), Study on Present Status and Future Direction of Korean Offshore Wind Power, The Transactions of the Korean Institute of Electrical Engineers, KIEE, 62(3), 312-321 https://doi.org/10.5370/KIEE.2013.62.3.312

Acknowledgement

Supported by : 한국에네지기술평가원(KETEP)