DOI QR코드

DOI QR Code

Selection of Voltage Vectors in Three-Level Five-Phase Direct Torque Control for Performance Improvement

  • Tatte, Yogesh N. (Department of Electrical Engineering, Visvesvaraya National Institute of Technology) ;
  • Aware, Mohan V. (Department of Electrical Engineering, Visvesvaraya National Institute of Technology)
  • 투고 : 2015.12.15
  • 심사 : 2016.07.01
  • 발행 : 2016.11.20

초록

This paper presents a Direct Torque Control (DTC) strategy for the five-phase induction motor driven by a three-level five-phase inverter in order to improve the performance of the five-phase induction motor. In the proposed DTC technique, only 22 voltage vectors out of 243 available voltage vectors in a three-level five-phase inverter are selected and are divided in 10 sectors each with a width of $36^{\circ}$. The four different DTC combinations (DTC-I, II, III and IV) for a three-level five-phase induction motor drive are investigated for improving the performance of five-phase induction motor. All four of the DTC strategies utilize a combination of the same large and zero voltage vectors, but with different medium voltage vectors. Out of these four techniques, DTC-II gives the best performance when compared to the others. This DTC-II technique is analyzed in detail for improvements in the performance of five-phase induction motor in terms of torque ripple, x-y stator flux and Total Harmonics Distortion (THD) of the stator phase current when compared to its two-level counterparts. To verify the effectiveness of the proposed three-level five-phase DTC control strategy, a DSP based experimental system is build. Simulation and experimental results are provided in order to validate the proposed DTC technique.

참고문헌

  1. I. Takahashi and T. Noguchi, "A new quick response and high efficiency control strategy of an induction motor," IEEE Trans. Ind. Appl., Vol. IA-22, No. 5, pp. 820-827, Sep./Oct. 1986. https://doi.org/10.1109/TIA.1986.4504799
  2. D. Casadei, G. Serra, and A. Tani, "Analytical investigation of torque and flux ripple in DTC schemes for induction motors," in 23rd International Conference on Industrial Electronics, Control and Instrumentation (IECON), Nov. 1997.
  3. J. K. Kang and S. K. Sul, "New direct torque control of induction motor for minimum torque ripple and constant switching frequency," IEEE Trans. Ind. Appl., Vol. 35, No. 5, pp. 1076-1082, Sep./Oct. 1999. https://doi.org/10.1109/28.793368
  4. K. K. Shyu, J. K. Lin, V. T. Pham, M. J. Yang, and T. W. Wang, "Global minimum torque ripple design for direct torque control of induction motor drives," IEEE Trans. Ind. Electron. Vol. 57, No. 9, pp. 3148-3156, Sep. 2010. https://doi.org/10.1109/TIE.2009.2038401
  5. D. Telford, M. W. Dunnigan, and B. W. Williams, "A novel torque-ripple reduction strategy for direct torque control of induction motor," IEEE Trans. Ind. Electron., Vol. 48, No. 4, pp. 867-870, Aug. 2001. https://doi.org/10.1109/41.937422
  6. T. Noguchi, M. Yamamptp, S. Kondo, and I. Takahashi, "High frequency switching operation of PWM inverter for direct torque control of induction motor," in IEEE Industry Application Society Annual Meeting, Oct. 1997.
  7. N. R. N. Idris and A. H. M. Yatim, "Reduced torque ripple and constant switching frequency strategy for direct torque control of induction machine," in 15th Annual IEEE Applied Power Electronics Conference and Exposition (APEC), Feb. 2000.
  8. A. Jidin, N. R. N. Idris, A. H. M. Yatim, T. Sutikno, and M. E. Elbuluk, "Extending switching frequency for torque ripple reduction utilizing a constant frequency torque controller in DTC of induction motors," Journal of Power Electronics, Vol. 11, No. 2, pp. 148-155, Mar. 2011. https://doi.org/10.6113/JPE.2011.11.2.148
  9. S. Arumugam and M. Thathan, "Novel switching table for direct torque controlled permanent magnet synchronous motors to reduce torque ripple," Journal of Power Electronics, Vol. 13, No. 6, pp. 939-954, Nov. 2013. https://doi.org/10.6113/JPE.2013.13.6.939
  10. K. B. Lee, J. H. Song, I. Choy, and J. Y. Yoo, "Torque ripple reduction in DTC of induction motor driven by three-level inverter with low switching frequency," IEEE Trans. Power Electron., Vol. 17, No. 2, pp. 255-263, Mar. 2002. https://doi.org/10.1109/63.988836
  11. K. B. Lee, J. H. Song, I. Choy, and J. Y. Yoo, "Improvement of low speed operation performance of DTC for three-level inverter fed induction motors," IEEE Trans. Ind. Electron., Vol. 48, No. 5, pp. 1006-1014, Oct. 2001.
  12. E. Levi, "Multiphase electric machines for variable-speed applications," IEEE Trans. Ind. Electron., Vol. 55, No. 5, pp. 1893-1909, May 2008. https://doi.org/10.1109/TIE.2008.918488
  13. H. A. Toliyat, H. Xu, and L. J. Peterson, "DSP-based direct torque control (DTC) for five-phase induction machines," IEEJ Trans. Ind. Appl., Vol. 121, No. 12, pp. 1256-1262, 2001. https://doi.org/10.1541/ieejias.121.1256
  14. L. Zheng, J. E. Fletcher, B. W. Williams, and X. He, "A novel direct torque control scheme for a sensorless five-phase induction motor drive," IEEE Trans. Ind. Electron., Vol. 58, No. 2, pp. 503-513, Feb. 2011. https://doi.org/10.1109/TIE.2010.2047830
  15. L. Gao, J. E. Fletcher, and L. Zheng, "Low speed control improvements for a 2-level 5-phase inverter-fed induction machine using classic direct torque control," IEEE Trans. Ind. Electron., Vol. 58, No. 7, pp. 2744-2754, Jul. 2011. https://doi.org/10.1109/TIE.2010.2070775
  16. J. A. Riveros, F. Barrero, E. Levi, M. J. Duran, S. Toral, and M. Jones, "Variable-speed five-phase induction motor drive based on predictive torque control," IEEE Trans. Ind. Electron., Vol. 60, No. 8, pp. 2957-2968, Aug. 2013. https://doi.org/10.1109/TIE.2012.2198034
  17. S. Lu and K. Corzine, "Direct torque control of five-phase induction motor using space vector modulation with harmonics elimination and optimal switching sequence," in 21st Annual IEEE Applied Power Electronics Conference and Exposition (APEC), Mar. 2006.
  18. M. H. Kim, N. H. Kim, and W. S. Baik, "A five-phase induction motor speed control system excluding effects of 3rd current harmonics component," Journal of Power Electronics, Vol. 11, No. 3, pp. 294-303, Mar. 2011. https://doi.org/10.6113/JPE.2011.11.3.294
  19. N. H. Kim and M. H. Kim, "Modified direct torque control system of five phase induction motor," Journal of Electrical Engineering and Technology, Vol. 4, No. 2, pp. 266-271, Jun. 2009. https://doi.org/10.5370/JEET.2009.4.2.266
  20. Y. Ren and Z. Q. Zhu, "Reduction of both harmonic current and torque ripple for dual three-phase permanent-magnet synchronous machine using modified switching-table-based direct torque control," IEEE Trans. Ind. Electron., Vol. 62, No. 11, pp. 6671-6683, Nov. 2015. https://doi.org/10.1109/TIE.2015.2448511
  21. Y. Ren and Z. Q. Zhu, "Enhancement of steady-state performance in direct-torque-controlled dual three-phase permanent-magnet synchronous machine drives with modified switching table," IEEE Trans. Ind. Electron., Vol. 62, No. 6, pp. 3338-3350, Jun. 2015. https://doi.org/10.1109/TIE.2014.2376881
  22. L. Gao and J. E. Fletcher, "A space vector switching strategy for three-level five-phase inverter drives," IEEE Trans. Ind. Electron., Vol. 57, No. 7, pp. 2332-2343, Jul. 2010. https://doi.org/10.1109/TIE.2009.2033087
  23. Q. Song, X. Zhang, F. Yu, and C. Zhang, "Research on space vector PWM of five-phase three-level inverter," in Proceedings of the 8th International Conference on Electrical Machines and Systems (ICEMS), Sep. 2005.
  24. B. Sakthisudhursun, J. K. Pandit, and M. V. Aware, "Simplified three-level five-phase SVPWM," IEEE Trans. Power Electron., Vol. 31, No. 3, pp. 2429-2436, Mar. 2016. https://doi.org/10.1109/TPEL.2015.2439700
  25. S. Payami, R. K. Behera, A. Iqbal, and R. Al-Ammari, "Common-mode voltage and vibration mitigation of a five-phase three-level NPC inverter-fed induction motor drive system," IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 3, No. 2, pp. 349-361, Jun. 2015. https://doi.org/10.1109/JESTPE.2014.2313153
  26. N. Bodo, O. Dordevic, M. Jones, and E. Levi, "A comparison of three-level single-sided and dual-inverter supply for a five-phase drive," in 15th International Power Electronics and Motion Control Conference (EPE/PEMC), Sep. 2012.