DOI QR코드

DOI QR Code

Using a Modular BOM for Cost Calculation in Wiring Harness

Modular BOM을 활용한 와이어링 하네스 원가 산출

Im, Chang-Sung;Park, Hoon;Kang, Jung-Tae
임창성;박훈;강정태

  • Received : 2015.09.25
  • Accepted : 2015.12.01
  • Published : 2016.03.01

Abstract

Since past till now, automotive wiring harness has been designed and produced under the method of part number list. However, the number of options has increased gradually on the basis of customer's needs and car manufacturer's policy, thereby bringing about an increase in the number of classified parts. Because of a large number of classified parts, cost estimates for manufacturing and production planning are more important than ever. However, the pre-existing manufacturing bill of material abbreviated as BOM is only focused on the list of materials used for actual manufacturing, and as such there have been limits to other fields or areas of usage except for manufacturing. In essence, the present paper is concerned with our study conducted on modular BOM as one of planning BOM. On such basis, we have been able to completely use a method by which to have access, make an option units' calculation in wiring harness manufacturing, and build an efficient system for cost estimates in manufacturing as well.

Keywords

Modular BOM;Option BOM;Information BOM;Planning BOM;Manufacturing BOM;Cost BOM;Wiring harness

References

  1. Lee, S.H. and Choi, D.S., 1993, A Study on Concurrent Engineering Methodology for Automobile Wiring Harness Design System, Transactions of Korea Society of Automotive Engineers, 1(3) pp.83-94.
  2. Lee, S.H. and Choi, D.S., 1996, Concurrent Engineering System for an Automation of Wiring Harness Design, Transactions of Korea Society of Automotive Engineers, 4(2), pp.32-49.
  3. Lee, S.J. and Lee, S.H., 1996, A Development of Feature-based Wire Harness Drawing System, Transactions of the Society of CAD/CAM Engineers, 1(3), pp.177-188.
  4. Kim, T.W., Jang, H.S. and Lee, B.G., 2000, A Study on Managing the Options of Generic BOM, Proceedings of the Korean Operations and Management Science Society Conference, 1, pp.179-182.
  5. Im, C.G., 2002, The Object-Oriented Analysis and Design of the BOM Based on Options, Jeonnam National University.
  6. Kim, W.J., 2003, A Development of Advanced Wiring Harness Design System for a Vehicle, Transactions of the Society of CAD/CAM Engineers, 8(3), pp.184-188.
  7. Xu and Jian, 2008, Research on Verification of Logical Connection of Wiring Harness, Seoul National University.
  8. Lim, K.S., 2013, Enterprise-BOM Design for Management Speed-up in the Automotive Industry, Journal of Korea Academia-Industrial Cooperation Society, 14(3), pp.1033-1039. https://doi.org/10.5762/KAIS.2013.14.3.1033
  9. Yao, J.M., Lu, C.H. and Wang, Y.H., 2014, Implementation Techniques of Modular BOM in Automobile Flexible Manufacturing, Advanced Materials Research, 988, pp.739-744. https://doi.org/10.4028/www.scientific.net/AMR.988.739