DOI QR코드

DOI QR Code

A Topological Transformation and Hierarchical Compensation Capacitor Control in Segmented On-road Charging System for Electrical Vehicles

Liu, Han;Tan, Linlin;Huang, Xueliang;Guo, Jinpeng;Yan, Changxin;Wang, Wei

  • 투고 : 2016.01.11
  • 심사 : 2016.03.14
  • 발행 : 2016.07.20

초록

Experiencing power declines when the secondary coil is at the middle position between two primary coils is a serious problem in segmented on-road charging systems with a single energized segmented primary coil. In this paper, the topological transformation of a primary circuit and a hierarchical compensation capacitor control are proposed. Firstly, the corresponding compensation capacitors and receiving powers of different primary structures are deduced under the condition of a fixed frequency. Then the receiving power characteristics as a function of the position variations in systems with a single energized segmented primary coil and those with double segmented primary coils are analyzed comparatively. A topological transformation of the primary circuit and hierarchical compensation capacitor control are further introduced to solve the foregoing problem. Finally, an experimental prototype with the proposed topological transformation and hierarchical compensation capacitor control is carried out. Measured results show that the receiving power is a lot more stable in the movement of the secondary coil. It is a remarkable fact that the receiving power rises from 10.8W to 19.2W at the middle position between the two primary coils. The experimental are in agreement with the theoretical analysis.

키워드

Hierarchical compensation capacitor control;Receiving power;Segmented on-road charging;Topological transformation

참고문헌

  1. S. Li and C. C. Mi, “Wireless Power Transfer for Electric Vehicle Applications,” IEEE J. Emerg. Sel. Topics Power Electron., Vol. 3, No. 1, pp. 4-17, Mar. 2015. https://doi.org/10.1109/JESTPE.2014.2319453
  2. F. Musavi and W. Eberle, “Overview of wireless power transfer technologies for electric vehicle battery charging,” IET Power Electron., Vol. 7, No. 1, pp. 60-66, Jan. 2014. https://doi.org/10.1049/iet-pel.2013.0047
  3. G. Buja, M. Bertoluzzo, and K. N. Mude, “Design and Experimentation of WPT Charger for Electric City Car,” IEEE Trans. Ind. Electon., Vol.62, No. 12, pp. 7436-7447, Dec. 2015. https://doi.org/10.1109/TIE.2015.2455524
  4. C. Duan, C. G. Jiang, and A. Taylor, “Design of a zero-voltage-switching large-air-gap wireless charger with low electric stress for electric vehicles,” IET Power Electron., Vol. 6, No. 9, pp. 1742-1750, Jan. 2014. https://doi.org/10.1049/iet-pel.2012.0615
  5. J. Y. Lee, H. Y. Shen, and K. W. Lee, “Design and implementation of weaving-type pad for contactless EV inductive charging system,” IET Power Electron., Vol. 7, No. 10, pp. 2533-2542, Oct. 2014. https://doi.org/10.1049/iet-pel.2013.0900
  6. X. D. T. García, J. Vázquez, and P. Roncero-Sánchez, “Design, implementation issues and performance of an inductive power transfer system for electric vehicle chargers with series–series compensation,” IET Power Electron., Vol. 8, No. 10, pp. 1920-1930, Sep. 2015. https://doi.org/10.1049/iet-pel.2014.0877
  7. S. Y. Choi, B. W. Gu, and S. Y. Jeong, “Advances in Wireless Power Transfer Systems for Roadway-Powered Electric Vehicles,” IEEE J. Emerg. Sel. Topics Power Electron., Vol. 3, No. 1, pp. 18-36, Mar. 2015. https://doi.org/10.1109/JESTPE.2014.2343674
  8. F. Sato, J. Murakami, and T. Suzuki, “Contactless energy transmission to mobile loads by CPLS-test driving of an EV with starter batteries,” IEEE Trans. Magn., Vol. 33, No. 5, pp. 4203-4205, Sep. 1997. https://doi.org/10.1109/20.619710
  9. G. A. Covic, J. T. Boys, and M. L. G. Kissin, “A Three-Phase Inductive Power Transfer System for Roadway-Powered Vehicles,” IEEE Trans. Ind. Electon., Vol. 54, No. 6, pp. 3370-3378, Dec. 2007. https://doi.org/10.1109/TIE.2007.904025
  10. S. Y. Choi, S. Y. Jeong, and B. W. Gu, “Ultraslim S-Type Power Supply Rails for Roadway-Powered Electric Vehicles,” IEEE Trans. Power Electron., Vol. 30, No. 11, pp. 6456-6468, Nov. 2015. https://doi.org/10.1109/TPEL.2015.2444894
  11. J. Hua, H. Z. Wang, Y. Zhao, and A. L. Zou, “LCL Resonant Compensation of Movable ICPT Systems with a Multi-load,” Journal of Power Electronics, Vol. 15, No. 6, pp.1654-1663, Nov. 2015. https://doi.org/10.6113/JPE.2015.15.6.1654
  12. S. Lee, B. Choi, and C. T. Rim, “Dynamics characterization of the inductive power transfer system for online electric vehicles by Laplace phasor transform,” IEEE Trans. Power Electron., Vol. 28, No. 12, pp. 5902-5909, Dec. 2013. https://doi.org/10.1109/TPEL.2013.2254500
  13. S. Y. Choi, B. W. Gu, and S. W. Lee, “Generalized active EMF cancel methods for wireless electric vehicles,” IEEE Trans. Power Electron., Vol. 29, No. 11, pp. 5770-5783, Nov. 2014. https://doi.org/10.1109/TPEL.2013.2295094
  14. M. Kim, H. Kim, and D. Kim, “A Three-phase wireless-power-transfer system for online electric vehicles with reduction of leakage magnetic fields,” Trans. Microw. Theory. Techn., Vol. 63, No. 11, pp. 3806-3813, Nov. 2015. https://doi.org/10.1109/TMTT.2015.2479627
  15. G. R. Nagendra, L. Chen, and G. A. Covic, “Detection of EVs on IPT highways,” IEEE J. Emerg. Sel. Topics Power Electron., Vol. 2, No. 3, pp. 584-597, Sep. 2014. https://doi.org/10.1109/JESTPE.2014.2308307
  16. H. Hao, G. A. Covic, and J. T. Boys, "An approximate dynamic model of LCL-T-based inductive power transfer power supplies," IEEE Trans. Power Electron., Vol. 29, No. 10, pp. 5554-5567, Oct. 2014. https://doi.org/10.1109/TPEL.2013.2293138
  17. K. Lee, Z. Pantic, and S. M. Lukic, “Reflexive field containment in dynamic inductive power transfer systems,” IEEE Trans. Power Electron., Vol. 29, No. 9, pp. 4592-4602, Sep. 2014. https://doi.org/10.1109/TPEL.2013.2287262
  18. J. A. Russer, M. Dionigi, and M. Mongiardo, "A moving field inductive power transfer system for electric vehicles," in Proc. European IEEE Microwave Conference (EuMC), pp. 519-522, 2013.
  19. J. M. Miller, O. Onar, and C. White, “Demonstrating dynamic wireless charging of an electric vehicle: The benefit of electrochemical capacitor smoothing,” IEEE Trans. Power Electron. Mag., Vol. 1, No. 1, pp. 12-24, Mar. 2014. https://doi.org/10.1109/MPEL.2014.2300978
  20. J. M. Miller, P. T. Jones, and J. Li, “ORNL Experience and Challenges Facing Dynamic Wireless Power Charging of EV's,” IEEE Circuits Syst. Mag., Vol. 15, No. 2, pp. 40-53, May 2015. https://doi.org/10.1109/MCAS.2015.2419012
  21. G. A. Covic and J. T. Boys, “Modern trends in inductive power transfer for transportation applications,” IEEE J. Emerg. Sel. Topics Power Electron., Vol. 1, No. 1, pp. 28-41, Mar. 2013. https://doi.org/10.1109/JESTPE.2013.2264473
  22. V. Prasanth, P. Bauer, "Study of misalignment for On Road Charging," in Proc. IEEE Transportation Electrification Conference and Expo (ITEC), pp. 1-8, 2013.
  23. J. L. Villa, J. Sallan, J. F. Sanz Osorio, A. Llombart, “High-misalignment tolerant compensation topology for icpt systems,” IEEE Trans. Ind. Electron., Vol. 59, No. 2, pp. 945-951, Feb. 2012. https://doi.org/10.1109/TIE.2011.2161055
  24. J. Huh, S. W. Lee, W. Y. Lee, G. H. Cho, “Narrow-width inductive power transfer system for online electrical vehicles,” IEEE Trans. Power Electron., Vol. 26, No. 12, pp. 3666-3679, Dec. 2012. https://doi.org/10.1109/TPEL.2011.2160972