- Volume 33 Issue 8
DOI QR Code
A Study on the Dynamic Stability of Heavy Press Considering Rotational Speed
회전 속도를 고려한 대형 프레스의 동적 안정성에 관한 연구
Shin, Min Jae;Kim, Chae Sil;Keum, Chang Min;Kim, Jae Min
- Received : 2016.06.10
- Accepted : 2016.07.20
- Published : 2016.08.01
This article describes the determination of the dynamic stability for a heavy press, particularly considering rotational speed. A finite element model of the driving parts for the heavy press was generated. We also applied boundary conditions and dynamic loads considering the driving conditions. Modal analysis was conducted using the finite element construction model. Therefore, no resonance was identified with the comparison between the results of the modal analysis and vibration excitation frequency by the gear tooth. In addition, the stress distribution of the driving parts for press was determined using transient analysis. As compared to the yield strength of the material, the dynamic stability the heavy press was confirmed.
Heavy press;Dynamic stability;Transient analysis;Natural frequency;Modal analysis
- Choi, S. H., "Autorepair Industry of Korea," Journal of the Korea Society of Automotive Engineers, Vol. 27, pp. 115-119, 2005.
- Lee, H.-S., Yin, J.-J., and Chae, S.-W., "Optimization of Automotive Body Panel Blank Holder Deformation by Structural Analysis of Press and Die Assembly," Proc. of the Korean Society of Automotive Engineers of Spring Conference, pp. 2039-2044, 2006.
- Park, H. S., Kim, S. I., and Hwang, I. B. "Structural Deformation Analysis of Mechanical and Hydraulic Press Using Servo Motor," Proc. of KSPE Autumn Conference, pp. 291-292, 2012.
- Cho, J.-U. and Han, M.-S., "Durability Evaluation by Strength due to Load Direction of Press in Common Use," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 6, pp. 52-59, 2013. https://doi.org/10.14775/ksmpe.2013.12.6.052
Supported by : 창원대학교 진동내구성연구센터