DOI QR코드

DOI QR Code

Analysis of Split Magnetic Fluid Plane Sealing Performance

  • Zhang, Hui-tao (School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University) ;
  • Li, De-cai (School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University)
  • 투고 : 2016.05.18
  • 심사 : 2016.11.02
  • 발행 : 2017.03.31

초록

Split magnetic fluid sealing is a combination of magnetic fluid rotary and plane sealing. Using the theory of equivalent magnetic circuit design as basis, the author theorized the pressure resistance performance of magnetic fluid plane sealing. To determine the pressure resistance of magnetic fluid plane sealing, the author adopted the method of finite element analysis to calculate the magnetic field intensity in the gap between plane sealing structures. The author also analyzed the effect of different sealing gaps, as well as different ratios between the sealing gap and tooth and solt width, on the sealing performance of split magnetic fluid. Results showed that the wider the sealing gap, the lower the sealing performance. Tooth width strongly affects sealing performance; the sealing performance is best when the ratio between tooth width and sealing gap is 2, whereas the sealing performance is poor when the ratio is over 8. The sealing performance is best when the ratio between the solt width and sealing gap is 4, indicating a slight effect on sealing performance when the ratio between the solt width and sealing gap is higher. Theoretical analysis and simulation results provide reference for the performance evaluation of different sealing equipment and estimation of critical pressure at interface failure.

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Beijing Natural Science Foundation

참고문헌

  1. J. Zou, X. Li, Y. Lu, and J. Hu, J. Magn. Magn. Mater. 252, 321 (2002). https://doi.org/10.1016/S0304-8853(02)00672-8
  2. R. Rosensweig and E. Ferrohydrodynamics, Dover Publications INC, New York (2002).
  3. I. Nakatani, T. Furubayashi, T. Takahashi, and H. Hanaoka, IEEE Trans. J. Magn. in Japan 65, 261 (1987).
  4. Z. Li, J. Magn. Magn. Mater. 252, 327 (2002). https://doi.org/10.1016/S0304-8853(02)00681-9
  5. N. C. Popa, I. D. Sabata, I. Anton, I. Potencz, and L. Vekas, J. Magn. Magn. Mater. 201, 385 (1999). https://doi.org/10.1016/S0304-8853(99)00148-1
  6. W. L. Lian, L. Qiang, and Y. M. Xuan, Science in China 51, 1203 (2008).
  7. W. Ochonski, Wear 130, 261 (1989). https://doi.org/10.1016/0043-1648(89)90238-X
  8. Y. Mitamura, S. Takahashi, S. Amari, E. Okamoto, S. Murabayashi, and I. Nishimura, Physics Procedia 9, 229 (2010). https://doi.org/10.1016/j.phpro.2010.11.051
  9. L. Matuszewski and Z. Szydlo, Polish Maritime Research 15, 49 (2008). https://doi.org/10.2478/v10012-007-0083-0
  10. K. Raj, B. Moskowitz, and R. Casciari, J. Magn. Magn. Mater. 149, 174 (1995). https://doi.org/10.1016/0304-8853(95)00365-7
  11. G. Morton and W. G. Fruh, J. Magn. Magn. Mater. 252, 324 (2002). https://doi.org/10.1016/S0304-8853(02)00670-4
  12. M. Sun, Large Scale Nitrogenous Fertilizer Industry (2006).
  13. K. Willenborg, S. Kim, and S. Wittig, J. Turbomachinery 123, 815 (2001). https://doi.org/10.1115/1.1397304
  14. I. Etsion, Y. Kligerman, and G. Halperin, Tribology Transactions 42, 511 (2008).
  15. W. Shapiro, C. Lee, H. Jones, J. Tribology 110, 525 (1987).
  16. Q. Yang, C. F. Gao, and W. Chen, Tribology Transactions 29, 151 (1986).
  17. D. Li, H. Xu, X. He, and H. Lan, J. Magn. Magn. Mater. 289, 419 (2005). https://doi.org/10.1016/j.jmmm.2004.11.118
  18. X. L. Yang, Z. L. Zhang, and L. I. Decai, Science China Technological Sciences 56, 2865 (2013). https://doi.org/10.1007/s11431-013-5365-4
  19. De-cai, Li, Beijing: Science Press 484 (2003). (in Chinese).
  20. S. Boyson, Sealing Technology 2007, 7 (2007).
  21. T. Liu, Y. Cheng, and Z. Yang, J. Magn. Magn. Mater. 289, 411 (2005). https://doi.org/10.1016/j.jmmm.2004.11.116
  22. V. K. Polevikov, Fluid Dynamics 32, 457 (1997).
  23. M. Zhao, J. B. Zou, J. Hu, J. Magn. Magn. Mater. 303, 428 (2006). https://doi.org/10.1016/j.jmmm.2006.01.060