DOI QR코드

DOI QR Code

A Study on the Simulation for Prediction of Cutting Force in Milling Process

밀링가공 시 절삭력 예측을 위한 시뮬레이션 연구

  • 백승엽 (인덕대학교 기계설계학과) ;
  • 공정식 (인덕대학교 기계설계학과) ;
  • 정성택 (인덕대학교 기계설계학과) ;
  • 김성현 (인하대학교 대학원 기계공학과) ;
  • 진다솜 (인하대학교 대학원 기계공학과)
  • Received : 2016.07.17
  • Accepted : 2017.02.13
  • Published : 2017.05.01

Abstract

The classical computer numerical control (CNC) machine is widely used for mold making in various industries. However, while improving the process, it has a negative effect on production quality and worker safety. As a result, the complaints of workers have increased and production quality has decreased. Therefore, we found optimizing cutting conditions to mold industrials for cutting conditions commonly used. However, the problem is the insert tool geometric modeling. In this study, the modeling of an insert tool was performed using the Solidworks program. The insert tool model was imported into the analysis application AdvantEdge, which predicted cutting forces, tool stress, and temperature.

Keywords

Cutting Force;Tool Stress;Prediction;FE Analysis;Tool Design

Acknowledgement

Grant : ICT기반 스마트 공작기계 및 유연 자동화 시스템 기술개발

References

  1. Lim, P., Park, S. Y. and Yang, G. E., 2006, "A Study on Tool Life in the High Speed Machining of Small-size End Mill by Factorial Design of Experiments and Regression Model," Journal of the Korean Society for Precision Engineering, Vol. 23, No. 2, pp. 73-80.
  2. Lee, S. Y. and Im, Y. M., 2004, "Prediction and Experiments of Cutting Forces in End Milling," Journal of the Korean Society of Manufacturing Technology Engineers. Vol. 13, No. 4, pp. 9-15.
  3. Kim, B. S., Kang, T. S., Lee, S. H., Kang, J. H. and Song, J. Y., 2005, "Development of a Tool Life Prediction Program for Increasing Reliability of Cutting Tools," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 14, No. 3, pp. 1-7.
  4. Lee, C. H. and Yang, M. Y., 2013, "Prediction and Measurement of Cutting Force in Side-Milling," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 22, No. 3, pp. 437-446. https://doi.org/10.7735/ksmte.2013.22.3.437
  5. Kim, G. D. and Ju, J. N., 2001, "Prediction of the Amount of Tool Fracture in Face Milling using Cutting Force Signal," Trans. Korean Soc. Mech. Eng. A, Vol. 25, No. 6, pp. 972-979.
  6. Ku, M. S., Kim, J. S., Kim, P. H., Park, J. H. and Kang, I. S., 2011, "An Evaluation of Machining Characteristics in Micro-scale Milling Process by Finite Element Analysis and Machining Experiment," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 20, No. 1, pp. 101-107.
  7. Third Wave AdvantEdge., 2014, "User's Manual, Version 6.1," Minneapolis, USA.