- Volume 18 Issue 1
DOI QR Code
Humidity Aging Effect on Adhesive Strength of Composite Single-lap Joint
- Kim, Myungjun (Graduate School of Aerospace and Mechanical Engineering, Korea Aerospace University) ;
- Kim, Yongha (Graduate School of Aerospace and Mechanical Engineering, Korea Aerospace University) ;
- Kim, Pyunghwa (Graduate School of Aerospace and Mechanical Engineering, Korea Aerospace University) ;
- Roh, Jin-Ho (Department of Aerospace and Mechanical Engineering, Korea Aerospace University) ;
- Park, Jungsun (Department of Aerospace and Mechanical Engineering, Korea Aerospace University)
- 투고 : 2016.09.08
- 심사 : 2017.02.17
- 발행 : 2017.03.30
Because adhesively bonded joints are used in many structural systems, it is important to predict accurate adhesive strengths. Composite aircraft with many joints are easily exposed to low temperatures and high relative humidity. This paper presents a humidity aging effect on the adhesive strength of a composite single-lap joint (SLJ). The adhesive strength of the SLJ is predicted using a finite element analysis with a cohesive zone model (CZM) technique. The humidity aging effect is evaluated based on the adhesive strength and CZM parameters. A lap joint test is carried out on the composite SLJ specimens, which are exposed for four months of 100% R.H. at
연구 과제 주관 기관 : Ministry of Trade, industry & Energy (MOTIE)
- Hart-Smith, L. J., "Designing to Minimize Peel Stresses is Adhesive Bonded Joints", Delamination and Debonding of Materials, Philadelphia, 1985, pp. 238-266.
- Anderson, G. P., Brinton, S. H., Ninow, K. J. and Devries, K. L., "A Fracture Mechanics Approach to Predicting Bond Strength", Advances in Adhesively Bonded Joints, American Society of Mechanical Engineers Winter Annual Meeting, Chicago, III., 1988, pp. 93-101.
- Lee, S. M., "An In-situ Failure Model for Adhesive Joints", Journal of Adhesion, Vol. 18, 1985, pp. 1-15. https://doi.org/10.1080/00218468508074933
- Groth, H. L., "A Method to Predict Fracture in an Adhesively Bonded Joint", International Journal of Adhesion and Adhesives, Vol. 5, 1985, pp. 19-22. https://doi.org/10.1016/0143-7496(85)90041-7
- Rybicki, E. F. and Kanninen, M. F., "A Finite Element Calculation of Stress Intensity Factor by a Modified Crack Closure Integral", Engineering Fracture Mechanics, Vol. 9, 1977, pp. 931-938. https://doi.org/10.1016/0013-7944(77)90013-3
- Dugdale, D. S., "Yielding of Steel Sheets Containing Slits", Journal of the Mechanics and Physics of Solids, Vol. 8, 1960, pp. 100-104. https://doi.org/10.1016/0022-5096(60)90013-2
- Barenblatt, G. I., "The Mathematical Theory of Equilibrium Cracks in Brittle Fracture", Advances in Applied Mechanics, Vol. 55, 1962, pp. 55-129.
- Hillerborg, A., Modeer, M. and Petersson, P. E., "Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements", Cement and Concrete Research, Vol. 6, 1976, pp. 773-782. https://doi.org/10.1016/0008-8846(76)90007-7
- Alfano, G., "On the Influence of the Shape of the Interface Law on the Application of Cohesive-zone Models", Composites Science and Technology, Vol. 66, 2005, pp. 723-730.
- Needleman, A., "A Continuum Model for Void Nucleation by Inclusion De-bonding", Journal of Applied Mechanics, Vol. 54, 1987, pp. 525-531. https://doi.org/10.1115/1.3173064