# 인발가공에 의해 제조된 전선용 Al-Fe-Mg-Cu-B계 합금의 기계적 및 전기적 특성

• Jung, Chang-Gi (Department of Advanced Materials Science and Engineering, Mokpo National University) ;
• Hiroshi, Utsunomiya (Department of Materials Science and Engineering, Graduate School of Engineering, Osaka University) ;
• Son, Hyeon-Taek (Automotive Components and Materals Group, Korea Institute of Industrial Technology) ;
• Lee, Seong-Hee (Department of Advanced Materials Science and Engineering, Mokpo National University)
• Accepted : 2017.10.13
• Published : 2017.11.27

#### Abstract

In this study, an Al-0.7wt%Fe-0.2wt%Mg-0.2wt%Cu-0.02wt%B alloy was designed to fabricate an aluminum alloy for electrical wire having both high strength and high conductivity. The designed Al alloy was processed by casting, extrusion and drawing processes. Especially, the drawing process was done by severe deformation of a rod with an initial diameter of 12 mm into a wire of 2 mm diameter; process was equivalent to an effective strain of 3.58, and the total reduction in area was 97 %. The drawn Al alloy wire was then annealed at various temperatures of 200 to $400^{\circ}C$ for 30 minutes. The mechanical properties, microstructural changes and electrical properties of the annealed specimens were investigated. As the annealing temperature increased, the tensile strength decreased and the elongation increased. Recovery or/and recrystallization occurred as annealing temperature increased, and complete recrystallization occurred at annealing temperatures over $300^{\circ}C$. Electric conductivity increased with increasing temperature up to $250^{\circ}C$, but no significant change was observed above $300^{\circ}C$. It is concluded that, from the viewpoint of the mechanical and electrical properties, the specimen annealed at $350^{\circ}C$ is the most suitable for the wire drawn Al alloy electrical wire.

#### References

1. H. W. Kim, S. B. Kang, H. Kang and K. W. Nam, J. Korean Inst. Met. Mater., 37, 1041 (1999).
2. K. D. Woo, H. S. Na, H. J. Mun and I. O. Hwang, J. Korean Inst. Met. Mater., 38, 766 (2000).
3. S. Guo, Y. Xu, Y. Han J. Liu, G. Xue and H. Nagaumi Trans. Nonferrous Met. Soc. China, 24, 2393 (2014). https://doi.org/10.1016/S1003-6326(14)63362-8
4. M. J. Ahn, H. S. You and S. H. Lee, Korean J. Met. Res., 26, 388 (2016). https://doi.org/10.3740/MRSK.2016.26.7.388
5. S. J. Mo Development trend of automobile lightweight materials and the responses of auto part manufacturers, Korean Auto. Res. Inst., p.41 (2013)
6. J. H. Yang and S. H. Lee, Korean J. Met. Res., 26, 628 (2016). https://doi.org/10.3740/MRSK.2016.26.11.628
7. J. J. Hwan, Ph.D. Thesis, Inha University, Incheon (2014).
8. K. T. Kim, Ph.D. Thesis, Yonsei University, Seoul (2001).
9. M. K. Park, J. I. Cho, S. H. Lee and C. W. Kim, J. Korean Fou. Soc., 36, 147 (2016). https://doi.org/10.7777/jkfs.2016.36.5.147
10. Gaston G. Gauthter, J. Inst. Met., 59, 129 (1936).