A Novel Hybrid Converter with Wide Range of Soft-Switching and No Circulating Current for On-Board Chargers of Electric Vehicles

  • Tran, Van-Long (Dept. of Electrical Engineering, Soongsil University) ;
  • Tran, Dai-Duong (Dept. of Electrical Engineering, Soongsil University) ;
  • Doan, Van-Tuan (Dept. of Electrical Engineering, Soongsil University) ;
  • Kim, Ki-Young (Dept. of Electrical Engineering, Soongsil University) ;
  • Choi, Woojin (Dept. of Electrical Engineering, Soongsil University)
  • 투고 : 2016.12.01
  • 심사 : 2017.08.02
  • 발행 : 2018.01.01


In this paper, a novel hybrid configuration combining a phase-shift full-bridge (PSFB) and a half-bridge resonant LLC converter is proposed for the On-Board Charger of Electric Vehicles (EVs). In the proposed converter, the PSFB converter shares the lagging-leg switches with half-bridge resonant converter to achieve the wide ZVS range for the switches and to improve the efficiency. The output voltage is modulated by the effective-duty-cycle of the PSFB converter. The proposed converter employs an active reset circuit composed of an active switch and a diode for the transformer which makes it possible to achieve zero circulating current and the soft switching characteristic of the primary switches and rectifier diodes regardless of the load, thereby making the converter highly efficient and eliminating the reverse recovery problem of the diodes. In addition an optimal power sharing strategy is proposed to meet the specification of the charger and to optimize the efficiency of the converter. The operation principle the proposed converter and design considerations for high efficiency are presented. A 6.6 kW prototype converter is fabricated and tested to evaluate its performance at different conditions. The peak efficiency achieved with the proposed converter is 97.7%.

E1EEFQ_2018_v13n1_143_f0001.png 이미지

Fig. 1. Proposed hybrid phase shift full bridge-half bridge LLC converter

E1EEFQ_2018_v13n1_143_f0002.png 이미지

Fig. 2. Key waveforms of the proposed hybrid converter

E1EEFQ_2018_v13n1_143_f0003.png 이미지

Fig. 3. Mode of operation of the proposed converter

E1EEFQ_2018_v13n1_143_f0004.png 이미지

Fig. 4. Relationship between the PSFB transformer turnratio n1 and output voltage of the LLC converter

E1EEFQ_2018_v13n1_143_f0005.png 이미지

Fig. 5. CC/CV charge characteristics of the battery and theZVS design point of the proposed on-board charger

E1EEFQ_2018_v13n1_143_f0006.png 이미지

Fig. 6. Hardware prototype of the proposed hybrid on-board charger

E1EEFQ_2018_v13n1_143_f0007.png 이미지

Fig. 7. Primary currents waveforms of the PSFB and LLCconverters (upper) and the input current waveforms(lower)

E1EEFQ_2018_v13n1_143_f0008.png 이미지

Fig. 8. Voltage and current waveforms of the leading legswitches

E1EEFQ_2018_v13n1_143_f0009.png 이미지

Fig. 9. Current and voltage waveforms of the lagging legswitches

E1EEFQ_2018_v13n1_143_f0010.png 이미지

Fig. 10. Diode voltage and current waveforms at thesecondary side of the HB LLC converter

E1EEFQ_2018_v13n1_143_f0011.png 이미지

Fig. 11. Diode current and voltage waveforms at thesecondary side of the PSFB converter

E1EEFQ_2018_v13n1_143_f0012.png 이미지

Fig. 12. Output inductor current and freewheeling diodecurrent waveforms of the PSFB converter

E1EEFQ_2018_v13n1_143_f0013.png 이미지

Fig. 13. Measured efficiency of the proposed on-boardcharger

Table 1. Specifications of the proposed on-board charger

E1EEFQ_2018_v13n1_143_t0001.png 이미지

Table 2. Comparison of hybrid on-board chargers

E1EEFQ_2018_v13n1_143_t0002.png 이미지


  1. D. Gautam, F. Musavi, M. Edington, W. Eberle, and W.G. Dunford, "An automotive on-board 3.3kW battery charger for PHEV application," Vehicular Power and Propulsion Conf., pp. 3466-3474, Sept. 2011.
  2. R. Redl, N. O. Sokal, and L. Balogh, "A novel softswitching full-bridge dc/dc converter: Analysis, design considerations, and experimental results at 1.5 kW, 100 kHz," IEEE Trans. Power Electron., vol. 6, no. 3, pp. 408-418, Jul. 1991.
  3. K. Tae-Hoon, L. Seung-Jun and C. Woojin, "Design and control of the phase shift full bridge converter for the on-board battery charger of electric forklifts," Journal of Power Electronics, vol. 12, pp. 113-119, 2012.
  4. Jiashen Tian, Junxia Gao, and Yiming Zhang, "Design of a Novel Integrated L-C-T for PSFB ZVS Converters," Journal of Power Electronics, vol. 17, no. 4, pp. 905-913, Jul. 2017.
  5. Y. Jiang, Z. Chen and J. Pan, "Zero-voltage switching phase shift full-bridge step-up converter with integrated magnetic structure," IET Power Elec-tronics, vol. 3, no. 5, pp. 732-739, Sept. 2010.
  6. I. H. Cho, K. M. Cho, J. W. Kim, and G. W. Moon, "A New Phase-Shifted Full-Bridge Converter With Maximum Duty Operation for Server Power System," IEEE Transactions on Power Electronics, vol. 26, no. 12, pp. 3491-3500, Dec. 2011.
  7. K. Chen and T. A. Stuart, "1.6 KW, 110 kHz dc/dc converter optimized for IGBT's," IEEE Trans. Power Electron., vol. 8, no. 1, pp. 18-25, Jan. 1993.
  8. G. Cho, J. Sabate, G. Hua, and F. C. Lee, "Zero voltage and zero current switching full bridge PWM converter for high power applications," IEEE Trans. Power Electron., vol. 11, no. 4, pp. 622-628, Jul. 1996.
  9. Y. C. Ren, M. Xu, J. Sun, and F. C. Lee, "A family of high power density unregulated bus converters," IEEE Trans. Power Electron., vol. 20, no. 5, pp. 1045- 1054, Sep. 2005.
  10. R. L. Steigerwald, "A comparison of half-bridge resonant converter topologies," IEEE Trans. Power Electron., vol. 3, no. 2, pp. 174-182, Apr. 1998.
  11. B. Lu, W. Liu, Y. Liang, F. C. Lee, and J. D. van Wyk, "Optimal design methodology for LLC resonant converter," Proc. IEEE Applied Power Electron. Conf. and Expo., pp. 19-23, Mar. 2006.
  12. T. Matysik, "The current and voltage phase shift regulation in resonant converters with integration control," IEEE Trans. Ind. Electron., vol. 54, no. 2, pp. 1240-1242, Apr. 2007.
  13. S. Zheng and D. Czarkowski, "Modeling and digital control of a phase-controlled series-parallel resonant converter," IEEE Trans. Ind. Electron., vol. 54, no. 2, pp. 707-715, Apr. 2007.
  14. Najam ul Hassan, Yoon-Jae Kim, Byung-Moon Han, and Jun-Young Lee, "A Hybrid DC/DC Converter for EV OBCs Using Full-bridge and Resonant Converters with a Single Transformer," Journal of Power Electronics, vol. 17, no. 1, pp. 11-19, Jan. 2017.
  15. W. S. Yu, J. S. Lai, W. H. Lai, and H. M. Wan, "Hybrid half-and full-bridge converter with high efciency and full soft-switching range," Proc. IEEE Energy Convers. Congr. and Expo., pp. 3080-3087, Sep. 2011.
  16. Y. Chen, X. Pei, L. Peng, and Y. Kang, "A high performance dual output dc-dc converter combined the phase shift full bridge and LLC resonant half bridge with the shared lagging leg," Proc. Appl. Power Electron. Conf. Expo., 2010, pp. 1435-1440.
  17. Van-Long Tran, Sunho Yu, Dai-Duong Tran, and Woojin Choi, "A Novel Hybrid Converter for 6.6 kW On Board Charger," ICPE 2015-ECCE Asia, pp. 1528-1534, Jun 2015.
  18. Chuang Liu, Bin Gu, Jih-Sheng Lai, Mingyan Wang, Yanchao Ji, Guowei Cai, Zheng Zhao, Chien-Liang Chen, Cong Zheng, and Pengwei Sun, "High- Efficiency Hybrid Full-Bridge - Half-Bridge Converter With Shared ZVS Lagging Leg and Dual Outputs in Series," IEEE Transactions on Power Electronics, vol. 28, no. 2, pp. 849-861, Feb. 2013.
  19. B. Gu, C. Y. Lin, B. Chen, J. Dominic, and J. S. Lai, "Zero-Voltage-Switching PWM Resonant Full- Bridge Converter With Minimized Circulating Losses and Minimal Voltage Stresses of Bridge Rectifiers for Electric Vehicle Battery Chargers," IEEE Transactions on Power Electronics, vol. 28, no. 10, pp. 4657-4667, Oct. 2013.