DOI QR코드

DOI QR Code

A Study on the Pull-out Strength of Bond Type Anchors

부착식 앵커의 인발강도에 관한 연구

  • Received : 2018.01.17
  • Accepted : 2018.03.29
  • Published : 2018.04.27

Abstract

The use of post installed anchors with bond type has lately been increasing when it is necessary to repair, reinforce, or remodel structures. This method provides flexibility and simplicity for construction of structural members that require adhering or fixing. Meanwhile, strength evaluation of anchors with expansion type among post-installed anchors systems has nearly reached setting up stage like design code through continual experimental studies for the last ten years, but analyses or experimental studies on anchor system with bond type are not yet sufficient. Accordingly, the designers and builders of korea depend on foreign design codes since there are no exact domestic design code they could credit. In this study, the objectives are investigating the effects on pull-out strength of resin anchors embedded into plain concrete by pull-out experiment of resin anchors with variables such as anchor diameter, anchor interval, embedment depth and edge distance.

Acknowledgement

Supported by : 한라대학교

References

  1. Fuchs, W, Eligehausen, R. and Breen, J. (2001) Concrete Capacity Design (CCD) Approach for Fastening to Concrete, ACI Structural Journal, ACI, Vol.92, No.6, pp. 787-802.
  2. Rodriguez, M. (1995) Behavior of Anchors in Uncracked Concrete under Static and Dynamic Loading, M.S. Thesis, The University of Texas at Austin.
  3. Fuchs, W, Eligehausen, R., and Breen, J. (1995) Concrete Capacity Design (CCD) Approach for Fastening to Concrete, ACI Structural Journal, ACI, Vol.92, No.6, pp. 787-802.
  4. Rosfrhis, J.H. (2001) Dynamic Behavior of Single and Double Near-Edge Anchors Loaded in Shear, ACI Structural Journal, Vol.98, No.3, pp.251-263.
  5. Hallowell, J.M. (1996) Tensile and Shear Behavior of Anchors in Uncracked and Cracked Concrete under Static and Dynamic Loading, M.S. Thesis, The University of Texas at Austin.
  6. Fuchs, W., Eligehausen, R., and Breen, J. (1995) ACI Committee 355, 2007, ACI 318-08, 2008.
  7. Frigui, I. (1992) Tensile Capacity of Single Anchors in Concrete, M.S. Thesis, The University of Texas at Austin.
  8. ACI Committee 355 (2000) Evaluating the Performance of Post-Installed Mechanical Anchors in Concrete (ACI 355.2-00), American Concrete Institute.
  9. ACI Committee 318 (2008) Building Code Requirements for Structural Concrete and Commentary (ACI 318M-08), American Concrete Institute, Detroit, Mich.
  10. ACI Committee 355 (2007) Qualification of Post-Installed Mechanical Anchors in Concrete (ACI 355.2-07), American Concrete Institute, Detroit.
  11. ASTM E488-96 (1996) Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements, American Concrete Institute.
  12. ASTM F1554-99 (1999) Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksiyield Strength, American Society for Testing and Materials.
  13. ACI Committee 214 (2002) Evaluation of Strength Test Results of Concrete, American Concrete Institute.
  14. ACI Committee 318 (2002) Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute.
  15. ACI Committee 349 (1990) Code Requirements for Nuclear Safety Related Concrete Structures, American Concrete Institute, Detroit.
  16. ACI Committee 349 (2001) Code Requirements for Nuclear Safety Related Concrete Structures, ACI 349-01, Appendix B Anchoring to, Concrete Institute.
  17. EOTA Annex C (2001) Design Methods for Anchorages.
  18. KCI Korean Concrete Institute (2012) Concrete Structure Design Code and Commentary, Appen II Anchoring to Concrete (in Korean).
  19. Malik, J.B. (1980) Shear Resistance of Anchor Bolts under Monotonic and Reversed Cyclic Loading, M.S. Thesis, The University of Texas at Austin.
  20. 박용명, 강문기, 노진경, 주호중, 강충현(2014) 선설치앵커의 동적 전단하중에 대한 저항강도: 철근보강 앵커, 한국강구조학회논문집, 한국강구조학회, 제26권, 제1호, pp.21-31.(Park, Y.M., Kang, M.K., Rob, J.K., Ju, H.J., and Kang, C.H. (2014) Shear Resistance of CIP Anchors Under Dynamic Loading: Reinforced Anchor, Journal of Korean Society of Steel Construction, KSSC, Vol.26, No.1, pp.21-31 (in Korean).)
  21. 박용명, 강문기, 김동현, 이종한, 강충현(2014) 선설치앵커의 동적 전단하중에 대한 저항강도: 비보강 앵커, 한국강구조학회 논문집, 한국강구조학회, 제26권, 제1호, pp.33-43.(Park, Y.M., Kang, M.K., Kim, D.H., Lee, J.H., and Kang, C.H. (2014) Concrete Breakout Capacity of CIP Anchors under Dynamic Shear Loading: Unreinforced Anchor, Journal of Korean Society of Steel Construction, KSSC, Vol.26, No.1, pp.33-43.)
  22. 박용명, 전명희, 최명국, 김철환, 김인기(2012) 전단력을 받는 선설치 앵커볼트의 콘크리트 파열파괴강도 평가 연구, 한국강구조학회논문집, 한국강구조학회, 제24권, 제2호, pp.207-215.(Park, Y.M., Jeon, M.H., Choi, M.K., Kim, C.H., and Kim, I.G. (2012) A Study on the Concrete Breakout Capacity of CIP Anchor Bolts Under Shear Loading, Journal of Korean Society of Steel Construction, KSSC, Vol.24, No.2, pp.207-215 (in Korean).)
  23. Eligehausen, R. (1995) Behavior of Fasteners Loading in Tension in Cracked Reinforced Concrete, ACI Journal, ACI, Proceedings, Vol.92, No 3, pp.523-531