DOI QR코드

DOI QR Code

Self-Starting Excitation System with Low-Power Permanent Magnet Generator

  • 투고 : 2018.03.25
  • 심사 : 2017.05.26
  • 발행 : 2018.11.01

초록

This paper presents a high-efficiency low-power permanent magnet (PM) generator for the power supply of the generator exciter. In the conventional generator system, the power for the exciter is fed by the generator output power or an emergency battery for the starting. The proposed low-power PM generator can generate the proper power and voltage to excite the exciter field winding. According to the starting of the generator, the designed PM generator can supply the constant voltage to the Automatic Voltage Regulator (AVR), then it can be used to control of exciter field current for the generator. Because of the designed PM generator which is placed inside the conventional generator system, the emergency battery and Potential Transducer(PT) for AVR can be removed. Thus, the total efficiency can be improved. The proposed generator system is tested in the practical system. And the efficiency characteristic is analyzed.

과제정보

연구 과제 주관 기관 : Korea Institute of Energy Technology Evaluation and Planning (KETEP), National Research Foundation of Korea(NRF)

참고문헌

  1. S. Nuzzo, M. Calea, C. Gerada, N. Brown, "Analysis, Modeling, and Design Considerations for the Excitation Systems of Synchronous Generators," IEEE Trans. on Industrial Electronics, vol. 65, no. 4, pp. 2996-3007, 2018. https://doi.org/10.1109/TIE.2017.2756592
  2. Selami Kesler, Tayyip L. Doser, "A Voltage Regulation System for Independent Load Operation of Stand Alone Self-Excited Induction Generators," JOURNAL OF POWER ELECTRONICS, vol. 16, no. 5, Sept. 2016, pp. 1869-1883. https://doi.org/10.6113/JPE.2016.16.5.1869
  3. YeonJun Jo, Jin-Woo Ahn, Dong-Hee Lee, "Control of a High Efficiency Generator with Exciter using Frequency Weight Factor," 2017 20th Internal Conference on Electrical Machines and Systems(ICEMS), pp. 1-6, 2017.
  4. E. Rebollo, C. A. Platero, F. Blazquez, R. Granizo, "Internal Sudden Short-circuit Response of a New HSBDS for Brushless Synchronous Machines Tested on a 15 MVA Generator," IET Electric Power Applications, vol. 11, no. 4, pp. 495-503, 2017. https://doi.org/10.1049/iet-epa.2016.0525
  5. J. K. Noland, F. Evestedt, J. J. Perez-Loya, J. Abrahamsson, U. Lundin, "Design and Characterization of a Rotating Brushless Outer Pole PM Exciter for a Synchronous Generator," IEEE Trans. on Industry Applications, vol. 53, no. 3, pp. 2016-2027, 2017. https://doi.org/10.1109/TIA.2017.2669890
  6. J. K. Noland, F. Evestedt, J. J. Perez-Loya, J. Abrahamsson, U. Lundin, "Comparison of Thyristor Rectifier Configurations for a Six-Phase Rotating Brushless Outer Pole PM Exciter," IEEE Trans. on Industrial Electronics, vol. 65, no. 2, pp. 968-976, 2018. https://doi.org/10.1109/TIE.2017.2726963
  7. J. K. Noland, K. B. Hjelmervik, U. Lundin, "Comparison of Thyristor-Controlled Rectification Topologies for a Six-Phase Rotating Brushless Permanent Magnet Exciter," IEEE Trans. on Energy Conversion, vol. 31, no. 1, pp. 314-322, 2016. https://doi.org/10.1109/TEC.2015.2480884
  8. J. K. Noland, F. Evestedt, J. J. Perez-Loya, J. Abrahamsson, U. Lundin, "Testing of Active Rectification Topologies on a Six-Phase Rotating Brushless Outer Pole PM Exciter," IEEE Trans. on Energy Conversion, vol. 33, no. 1, pp. 59-67, 2018. https://doi.org/10.1109/TEC.2017.2746559
  9. S. Zhu, C. Liu, K. Wang, Y. Hu, Y. Ning, "Theoretical and Experimental Analyses of a Hybrid Excitation Synchronous Generator with Integrated Brushless Excitation," IET Electric Power Applications, vol. 10, no. 4, pp. 258-267, 2016. https://doi.org/10.1049/iet-epa.2015.0262
  10. Z. Zhang, Y. Liu, B. Tian, W. Wang, "Investigation and Implementation of a New Hybrid Excitation Synchronous Machine Drive System," IET Power Applications, vol. 11, no. 4, pp. 487-494, 2017. https://doi.org/10.1049/iet-epa.2016.0542
  11. F. Yao, Q. An, X. Gao, L. Sun, T. A. Lipo, "Principle of Operation and Performance of a Synchronous Machine Employing a New Harmonic Excitation Scheme," IEEE Trans. on Industry Applications, vol. 51, no. 5, pp. 3890-3898, 2015. https://doi.org/10.1109/TIA.2015.2425363
  12. F. Yao, Q. An, L. Sun, T. A. Lipo, "Performance Investigation of a Brushless Synchronous Machine With Additional Harmonic Field Windings," IEEE Trans. on Industrial Electronics, vol. 63, no. 11, pp. 6756-6766, 2016. https://doi.org/10.1109/TIE.2016.2581759
  13. N. Jiao, W. Liu, Z. Zhang, T. Meng, J. Peng, Y. Jiang, "Field Current Estimation for Wound-Rotor Synchronous Starter-Generator With Asynchronous Brushless Exciters," IEEE Trans. on Energy Conversion, vol. 32, no. 4, pp. 1554-1561, 2017. https://doi.org/10.1109/TEC.2017.2698599
  14. N. Jiao, W. Liu, T. Meng, J. Peng, S. Mao, "Design and Control of a Two-Phase Brushless Exciter for Aircraft Wound-Rotor Synchronous Starter/Generator in the Starting Mode," IEEE Trans. on Power Electronics, vol. 31, no. 6, pp. 4452-4461, 2016. https://doi.org/10.1109/TPEL.2015.2477456
  15. N. Jiao, W. Liu, Z. Zhang, T. Meng, J. Peng, S. Mao, "Detailed Excitation Control Methods for Two-Phase Exciter of the Wound-Rotor Synchronous Starter/Generator in the Starting Mode," IEEE Trans. on Industry Applications, vol. 53, no. 1, pp. 115-123, 2017. https://doi.org/10.1109/TIA.2016.2607149
  16. A. Griffo, R. Wrobel, P. H. Mellor, J. M. Yon, "Design and Characterization of a Three-Phase Brushless Exciter for Aircraft Starter/Generator," IEEE Trans. on Industry Applications, vol. 49, no. 5, pp. 2016-2115, 2013.