DOI QR코드

DOI QR Code

Behavior Analysis of High Pressure Valve Tester

고압용 밸브시험기의 거동해석

Lee, Jong-sun
이종선

  • Received : 2018.10.30
  • Accepted : 2019.01.20
  • Published : 2019.01.28

Abstract

High pressure valve tester used in industrial fields precise measurement gives inconvenience in precise measurement due to manually regulated pressures. In order to improve this inconvenience, the high pressure valve tester was designed by using CATIA and structural analysis of the designed high pressure valve tester was conducted and water leaking, total deformation, strain and stress were obtained by applying ANSYS. These results will be provided to develop new concepts of high pressure valve tester as initial data.

Keywords

High Pressure;Valve;Behavior Analysis;Convergence;Analysis Result

References

  1. Solid Works User's Manual Revision 3.0. (2006). SolidWorks Co.
  2. C. W. Park & C. H. Hong. (2008). "User Guide of ANSYS Workbench", Intervision.
  3. ANSYS User's Manual Ver.12.1. (2010). ANSYS Inc.
  4. S. C. Han & B. G. Lee. (2018). A Study on the Convergence Contract Behavior of Friction Heat and Pad on Disk Brake, Journal of the korea Convergence Society, 9(1), 291-301.
  5. G. W. Hwang & J. U. Cho. (2017). Convergence Study on Durability Improvement due to Radius on Arch Type at CFRP Structure with Stacking Angle, Journal of the Korea Convergence Society, 8(7), 219-224. https://doi.org/10.15207/JKCS.2017.8.4.219
  6. James shakelford & William Alexander. (1994). "Material Science and Engineering Hand Book", CRC Press.
  7. J. S. Lee. (2013). Structural Analysis of High Pressure Cleaning Machine, Journal of the Korea Academia-Industrial cooperation Society, 14(10), 4694-4699. https://doi.org/10.5762/KAIS.2013.14.10.4694
  8. S. C. Park. (2014). Quality Evaluations of Induction Motors Bracket Castings during Fabrication Processes, Journal of the Korea Academia-Industrial cooperation Society, 15(9), 5474-5479. https://doi.org/10.5762/KAIS.2014.15.9.5474
  9. J. S. Lee. (2014). FEM Analysis of High Pressure Cleaning Machine, Journal of the Korea Academia-Industrial cooperation Society, 15(10), 5950-5954. https://doi.org/10.5762/KAIS.2014.15.10.5950
  10. J. H. Lee & J. U. Cho. (2015). Convergence Technique Study through Simulation Thermal Analysis due to the Shape of Electric Heater, Journal of the Korea convergence Society, 6(6), 241-246.
  11. J. R. Kim. (2016). Development of High Efficiency Dehumidifiers in low temperature, Journal of the Korea Academia-Industrial cooperation Society, 17(9), 206-211. https://doi.org/10.5762/KAIS.2016.17.9.206
  12. W. Y. Kim & S. G. Kim. (2017). The Design and Implementation of an Emergency Video call Integrated Management System based on VoIP, Journal of the Korea convergence Society, 8(12), 93-99.
  13. N. H. Kim & J. H. Byeon & K.H.Lee. (2017). Shape Optimization of Ball Valve for High Temperature, Journal of the Korea Academia-Industrial cooperation Society, 18(1), 15-20. https://doi.org/10.5762/KAIS.2017.18.1.15
  14. B. J. Kim & S. B. Lee(2017). Study on the Shaping Process of Turbocharger Nozzle Slide Joint, Journal of the Korea Academia-Industrial cooperation Society, 18(1), 107-114. https://doi.org/10.5762/KAIS.2017.18.1.107
  15. J. S. Lee. (2012). Design and Computational Fluid Dynamics of Pressure Reducing Valve, Journal of the Korea Academia-Industrial cooperation Society, 13(7), 2853-2857. https://doi.org/10.5762/KAIS.2012.13.7.2853