# 적층 각도를 가진 CFRP 접착 구조물의 파손 및 정적 파괴 특성에 관한 융합 연구

Lee, Jung-Ho;Kim, Eundo;Cho, Jae-Ung
이정호;김은도;조재웅

• Accepted : 2019.01.20
• Published : 2019.01.28
• 38 3

#### Abstract

As composite is the light weight material whose durability and mechanical property are more superior than the existing general material. By taking notice of the composite with light weight, this study was about to investigate the static fracture characteristic of the bonded CFRP structure jointed with adhesive. Also, CFRP double cantilever beam with the variable of laminate angle was designed and the static fracture analysis was carried out. The laminate angles of CFRP double cantilever beam designed for this study were $30^{\circ}$, $45^{\circ}$ and $60^{\circ}$ individually. As the study result, the specimen with the laminate angle of $45^{\circ}$ was shown to have the durability better than those with the layer angles of $30^{\circ}$ and $45^{\circ}$. It was checked that the specimen with the laminate angle of $30^{\circ}$ had the weakest durability among all specimens. The damage data of the bonded CFRP structure by laminate angle could be secured through this study result. As the damage data of bonded interface obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the machine or structure at real life.

#### Keywords

Convergence;DCB(Double cantilever beam) specimen;CFRP(Carbon fiber reinforced plastic);Stacking angle;Equivalent stress

#### References

1. J. U. Cho, C. S. Kim, H. S. Lee & Y. C. Kim. (2014). Study of the Damage Property of a Contacted Indent by Finite Element Method. Journal of the Korea Academia-Industrial cooperation Society, 15(10), 5974-5979. DOI : 10.5762/KAIS.2014.15.10.5974 https://doi.org/10.5762/KAIS.2014.15.10.5974
2. J. W. Park & J. U. Cho. (2017). Convergence Study on Composite Material of Unidirectional CFRP and SM 45C Sandwich Type that Differs in Stacking Angle. Journal of the Korea Convergence Society, 8(7), 231-236. DOI : 10.15207/JKCS.2017.8.7.231
3. G. W. Hwang & J. U. Cho. (2017). Convergence Study on Durability Improvement due to Radius of Arch Type at CFRP Structure with Stacking Angle. Journal of the Korea Convergence Society, 8(7), 219-224. DOI : 10.15207/JKCS.2017.8.7.219 https://doi.org/10.15207/JKCS.2017.8.4.219
4. G. W. Hwang & J. U. Cho. (2017). Analysis Study on the Damage of Crack Happening with the Bending at CFRP Plate due to Stacking Angle. Journal of the Korea Convergence Society, 8(3), 185-190. DOI : 10.15207/JKCS.2017.8.3.185 https://doi.org/10.15207/JKCS.2017.8.3.185
5. J. W. Park & J. U. Cho. (2017). A Study of Fracture Behavior due to the Propagation of Center Crack at Unidirectional CFRP through Finite Element Analysis. Journal of the Korean Society of Mechanical Technology, 19(1), 21-26. https://doi.org/10.17958/ksmt.19.1.201702.21
6. J. H. Lee & J. U. Cho. (2016). Evaluation on Strength and Durability of Tensile Specimens of CFRP and Metal with Notches. Journal of the Korean Society of Mechanical Technology, 18(6), 867-872. https://doi.org/10.17958/ksmt.18.6.201612.867
7. J. H. Lee & J. U. Cho. (2016). A Study on Impact Fracture on CFRP Sandwich Composite and CFRP Sandwich Composite with Aluminum Foam Core. Journal of the Korean Society of Mechanical Technology, 18(2), 214-219. https://doi.org/10.17958/ksmt.18.2.201604.214
8. J. H. Lee & J. U. Cho. (2016). An Analytical Study on Crack Behavior Inside Standard Compact Tension Specimen with Holes. Transactions of the Korean Society of Mechanical Engineers - A, 40(6), 531-537. DOI : 10.3795/KSME-A.2016.40.6.531 https://doi.org/10.3795/KSME-A.2016.40.6.531
9. M. S. Kang, H. S. Park, J. H. Choi, J. M. Koo & C. S. Seok. (2012). Prediction of Fracture Strength of Woven CFRP Laminates According to Fiber Orientation. Transactions of the Korean Society of Mechanical Engineers - A, 36(8), 881-887. DOI : 10.3795/KSME-A.2012.36.8.881 https://doi.org/10.3795/KSME-A.2012.36.8.881
10. K. C. Park & M. S. Kim. (1994). Analysis of the Residual Strengths and Failure Mechanisms in Laminated Composites under Impact Loading. Journal of the Korean Society for Precision Engineering, 11(3), 105-121.
11. C. S. Seak & S. Y. Kim. (2000). Variation of the Fracture Resistance Curve with the Change of a Size in the CT Specimen. Transactions of the Korean Society of Mechanical Engineers - A, 24(12), 2963-2971. DOI : 10.22634/KSME-A.2000.24.12.2963
12. J. U. Cho. (2014). Analytical Study on Durability due to the Load of Artificial Knee Joint. Journal of the Korea Convergence Society, 5(2), 7-11. DOI : 10.15207/JKCS.2014.5.3.007
13. J. H. Lee & J. U. Cho. (2016). Convergence Technique Study of Durability Analysis due to the Track Pad Shape of Track Vehicle with Heavy Weight. Journal of the Korea Convergence Society, 7(1), 177-182. DOI : 10.15207/JKCS.2016.7.1.177
14. H. J. Bang, S. K. Lee, C. Cho, J. U. Cho & H. K. Choi. (2014). Fracture Behavior of Adhesive-Bonded Aluminum Foam with Double Cantilever Beam. Transactions of the Korean Society of Mechanical Engineers - A, 38(5), 521-526. DOI : 10.3795/KSME-A.2014.38.5.521 https://doi.org/10.3795/KSME-A.2014.38.5.521
15. H. K. Choi, S. J. Hong, S. H. Kim & J. U. Cho. (2012). Study on Fatigue Analysis of DCB Specimen Bonded. The Korea Academia-Industrial cooperation Society, 13(7), 2865-2871. https://doi.org/10.5762/KAIS.2012.13.7.2865

#### Acknowledgement

Supported by : National Research Foundation of Korea(NRF)