Go to the main menu
Skip to content
Go to bottom
REFERENCE LINKING PLATFORM OF KOREA S&T JOURNALS
> Journal Vol & Issue
Journal of Korean Society of Hazard Mitigation
Journal Basic Information
Journal DOI :
Korean Society of Hazard Mitigation
Editor in Chief :
Moo Jong Park
Volume & Issues
Volume 2, Issue 4 - Dec 2002
Volume 2, Issue 3 - Sep 2002
Volume 2, Issue 2 - Jun 2002
Volume 2, Issue 1 - Mar 2002
Selecting the target year
Evaluation of Laboratory Performance Characteristics of Fiber-Reinforced Asphalt Concrete
Kim, Nak-Seok ;
Journal of Korean Society of Hazard Mitigation, volume 2, issue 2, 2002, Pages 61~72
The optimum fiber and asphalt binder contents were decided on the base of the Mashall mix design method. To compare the mechanical characteristics between the conventional(dense-graded 20) and the fiber-reinforced mixtures, indirect tension tests were conducted under three temperatures(5, 20, 60
). In particular, the wheel tracking tests were performed to evaluate the rutting resistances of the mixtures. Test results showed that the indirect tensile strength of fiber-reinforced asphalt concrete was higher than that of conventional one. The toughness of fiber-reinforced mixture was 1.27 to 1.97 times higher than that of conventional one, depending upon the temperature. In addition, the results of wheel tracking tests and the retained indirect splitting tension tests conducted at
revealed that the resistance to permanent deformation of fiber-reinforced mixture was stronger than that of the conventional one.
The Seismic Hazard Study on Chung-Nam Province using HAZUS
Kang, Ik-Bum ; Park, Jung-Ho ;
Journal of Korean Society of Hazard Mitigation, volume 2, issue 2, 2002, Pages 73~83
HAZUS developed by FEMA is applied to estimation on seismic hazard in Chung-Nam Province using basic data on general building, population, and geology of well-logging. Through the investigation on historical and instrumental earthquakes in Korean Peninsula seismic hazard is estimated in Chung-Nam Province in two ways for calculation of acceleration, deterministically and probabilistically. In deterministic method seismic hazard in Chung-Nam Province is estimated by generation of the maximum event that occurs in Hongsung and has magnitude of 6.0. According to the result, Hongsung Gun, Yesan Gun, and Boryung City are the most severe in building damage. The expected number of people who need hospitalization in Hongsung Gun and Yesan Gun due to the earthquake are 1.1 and 0.4, respectively. In probabilistic(return period of 5,000 year) method seismic hazard in Chung-Nam Province is estimated. According to the result, Gongju City is the most severe in building damage. The expected number of people who need hospitalization in Gongju City and Nonsan City due to the earthquake are 0.1 and 0.15, respectively.
Development of the Intensity-Duration-Frequency Curve at Kong-Ju Area
Jeong, Sang-Man ; Park, Seok-Chae ; Yoo, Chan-Jong ;
Journal of Korean Society of Hazard Mitigation, volume 2, issue 2, 2002, Pages 85~93
This paper is to derive the Intensity-Duration-Frequency Curve at Kong-Ju area after estimating probable rainfall depths using Rainfall Frequency Atlas of Korea. It has been suggested that the probable rainfall intensity formulas should be classified by short and long term basis in this area. The coefficients of determination of the probable rainfall intensity formulas are calculated as high as 0.9924 through 0.9971. Four types of rainfall intensity formulas such as Talbot type, Sherman type, Japanese type, General type are considered to determine the best type for the Kong-Ju area. Sherman type applied in this study can be determined as the representative probable rainfall intensity formula in the area. Therefore the rainfall intensity formulas for the selected return period in this study provide valuable insight into the estimation of the rainfall intensity. The developed Intensity-Duration-Frequency Curve can be used to provide a better hydraulic design at Kong-Ju area.
Pull-out Behaviors of Headed Bars with Different Details of Head Plates
Park, Hyun-Gyoo ; Yoon, Young-Soo ; Ryoo, Young-Sup ; Lee, Man-Seop ;
Journal of Korean Society of Hazard Mitigation, volume 2, issue 2, 2002, Pages 95~104
This paper presents the pull-out failure mode on Headed Bars and prediction of tensile capacity, as governed by concrete cone failure. 17 different plate types, three different concrete strengths and three different welding types of specimens were simulated. Test variables are the reinforcing bar diameters connected to headed plate (e.g., 16mm, 19mm and 22mm), the head plate shapes (e.g., circular, square, rectangular), the dimensions of head plates (e.g., area and thickness), the types of welding scheme for connection of reinforcing bars and head plates (e.g., general welding and friction welding). Headed Bars were manufactured in different areas, which shape and thickness are based on ASTM 970-98. Calculation of Embedment length in concrete is based on CSA 23.3-94, and static tensile load was applied. Pullout capacities tested were compared to the values determined using current design methods such as ACI-349 and CCD method. If compare experiment results and existings, Headed bar expressed high strength and bigger breakdown radious than standard by wide plate area and anomaly reinforcing rod unlike anchor.
Behavior of Steel Plate Girder Using Slab Anchor
Han, Sang-Yun ; Han, Taek-Hee ; Park, Nam-Hoi ; Kang, Young-Jong ;
Journal of Korean Society of Hazard Mitigation, volume 2, issue 2, 2002, Pages 105~113
Steel-Concrete composite girders have been used since early in the 1920's due to their advantages, which are lower weight, increasement of stiffness, slenderness, long span. However, in designing short to continuous composite bridges, negative moment occurs in mid-support and creates problems such as cracks in the concrete slab. Therefore, partially composite bridges are considered. In this time, slab-anchor is used in these. If the stiffness of shear connectors is insufficient, slip would happen at the contact surface. Partial interaction is the case that takes account of slips. In this paper, the evaluation of initial shear stiffness of slab-anchor in composite bridges is obtained from Push-Out specimen. Also, finite element analyses which uses the initial shear stiffness of slab-anchor got the experiment are carried out on simple composite girder and continuous composite girder. Futhermore, the ratio of composite according to various shear stiffness are investigated and the classification according to the ratio of composite is proposed.