Go to the main menu
Skip to content
Go to bottom
REFERENCE LINKING PLATFORM OF KOREA S&T JOURNALS
> Journal Vol & Issue
Journal of Korean Acedemy of Dental Technology
Journal Basic Information
Journal DOI :
Korean Academy of Dental Technology
Editor in Chief :
Volume & Issues
Volume 13, Issue 1 - Dec 1991
Selecting the target year
The Margin Fitness under the Variation of Temperature of Phosphate Bonded Investment's Special Liquid
Kim, Eun-Sook ;
Journal of Korean Acedemy of Dental Technology, volume 13, issue 1, 1991, Pages 5~8
There are many factors influence on the margin fitness of Casting body. Among them, I intend to examine the influence of the gap of temperature of investment's special liguid. As the result of investing and experiment of the whole of eighty copings under the classification the temperature of liquid into four groups 0
I came to the conclusion as following. 1. The margin fitness of these four groups, as the result of examination with microscope, was the most accurate at 20
was less aceurate in order of 30
. 2. directions is the way to preserve the most exact margin fitness.
The Margin Fit of Nickel-Chromium Metal Alloys used for the Production of Crown and Bridge Prosthetics
Lee, In-Kyu ; Choi, Un-Jae ;
Journal of Korean Acedemy of Dental Technology, volume 13, issue 1, 1991, Pages 9~13
The purpose of this study was to determine the marginal fit of recasting by used nickel-chromium metal alloys, Hi-Crown, New-Crown and CB-80. Ninety crown prosthetics were divided into eighteen groups according to new to old metal ratios. Each crown was seated on its master die and then the marginal gaps were measured under optical microscope(
50). All groups were showed good marginal fit, except group 3 of Hi-Crown(156
m). The results suggest that the marginal fit of Ni-Cr metal alloy casting bodies were good as without concerned to mixed ratios and metals.
A Study to Effect on the Porosity when Model Making for Control of Vibrator
Lee, Do-Kyeng ;
Journal of Korean Acedemy of Dental Technology, volume 13, issue 1, 1991, Pages 15~19
This study was made to effect on the porosity when model making for control of vibrator. Samples of total 600 were made by plaster and stone divided low, medium and high which is 100 each. The following results were obtained to observation porosity of surface by eyes. 1. Second stage was fewer than third stage, first stage was fewer than third stage in porosity number of plaster model. 2. Second stage was fewer than first stage in porosity number of stone model. 3. Stone model was fewer than plaster model in porosity number of third stage.
A Study on the Mesio-Distal Crown Diameters and Crown Length of the Permanent Anterior Teeth
Lee, Tae-Jung ;
Journal of Korean Acedemy of Dental Technology, volume 13, issue 1, 1991, Pages 21~26
The mesiodistal crown diameters and crown length of the permanent anterior teeth have been studied and analyzed about the mean size, S.D, S.E etcs from stone models of 100 Korean male and 74 female. From the study, the following conclusions were made : 1. Statistical differences of left and right teeth were not found in the mesio distal crown diameters and crown length of the permanent anterior teeth. 2. The mean values of mesiodistal crown diameters of permanent anterior teeth were slightly larger in male than in females and statistical differences of males and females were found in maxillary right central incisor, mandibular left canine, mandibular right lateral incisor and mandibular right canine. 3. The mean values of crown length of permanent anterior teeth were slightly larger in male than in female and statistical differences of males and females were found in mandibular left canine, mandibular right canine. 4. Mesiodistal crown diameters and crown length of maxillary left lateral incisors and right lateral incisors of female are larger than that of male.
A Study on the Heat-Curing of Acrylic Resin using Ring Furnace
Choi, Seog-Soon ;
Journal of Korean Acedemy of Dental Technology, volume 13, issue 1, 1991, Pages 27~31
The purpose of this study was to evaluate the effect of curing time and curing temperature on the hear - Curing of acrylic resin using ring furnace. Specimens were fabricated from 2 kinds(Laboron, Bertex) heat-cured resin. Total 200 samples were divided into 4 groups(70
) and each group was divided into 5 small groups(30 min., 45min., 60min., 75min., 90min.). A microscope(Olympus Coll Co. Japan) was used to examine a randomly selected central zone, midzone and surface for each complete specimen. The results of the experiment were as follows : 1. To obtain non-polymerzation, cure the resin for 30 minutes at 70
in a ring furnace. 2. To obtain with porosity, cure the resin for 45 minutes, 60 minutes and 75 mintes at 70
and for 90 minutes at 150
in ring furnace. Porosity appears in Laboron for 30 minutes, 45 minutes at 150
in a ring furnace. 3. Every other specimens connot get a sight of special problem with makes eye in the made surface.
치과용(齒科用) 합금(合金) 취급(取扱)에 대한 임상적(臨床的) 고찰(考察)
Jang, Han-Il ;
Journal of Korean Acedemy of Dental Technology, volume 13, issue 1, 1991, Pages 33~35
Study of Health Status of Dental Technicians by Todai Health Index
Kim, Won-Soo ;
Journal of Korean Acedemy of Dental Technology, volume 13, issue 1, 1991, Pages 37~51
In order to evaluate health status of dental technicians as an individual and a group, this study was conducted with Todai Health Index Questionaire on randomly sampled 277 persons(236 males and 41 females) from Aug. 20 to Oct. 6, in 1990 obtained Following conclusions were drawn. 1. Age composition of the subjects was 136 males(57.6%) in the age of 20
29 and 28 females(68.3%) in the age of 20
24. As for working places, 215 males(91.1%) and 38 females (92.7%) were working for dental laboratories and rest of them were at clinics and hospitals. In working years, male technicians who have been working for 5
10 years amounted to 80 (33.8%) and 12 females(29.3%) were working for 1
3years. 2. Responses to psychosomatic subjective symptom complaints rated as the highest in multiple subjective symptom(males : 40.00%, females : 41.98%) and those in physical items and mental irritability(male : 24%, female : 25%) and in mental items came next in order. The rate of complaint in depression was higher in female group than in male group (p<0.05). 3. Resonses to psychosomatic subjective symptom complaints in male group were high in the age of 20
29 and in the age of 20
24 in female group. The rates of complaint were higher in multiple subjective symptom, respiratory, eye and skin(p<0.05) and digestives(p<0.01) complaints. 4. Responses to psychosomatic subjective symptom complaints were higher among persons working at dental laboratories than at other working places : dental clinics and hospitals in all the items except for respiratory, depression and aggressiveness. Rates of complaints in eye and skin showed significant difference between working places(p<0.05). 5. Those who are engaged in polishing part tended to complain more about psychosomatic subjective symptoms. 6. The higher the level of education is the more they complained the psychosomatic subjective symptoms both in male and female group. In the difference of complaint respones, male group showed high rates of complaint in depression and female group in aggressiveness(p<0.05). 7. Responses to psychosomatic complaints by the length of working service were moderate in males who were working less than 10 years, and they decreased after 10 years of service. Females showed the highest response rate in the group of 3
5 years service and the lowest response in the group of 5 years service. Male complained more in aggressiveness and female in respiratory and aggressiveness(p<0.05). 8. Responses to psychosomatic subjective symptom complaint varied according to working hours of a day both in male and female group, showing high complaint rates in multiple subjective symptom, respiratory, eye and skin, mouth and anus, digestive, mental irritability and irregular life in male group(p<0.05).
A Study on the Methods of Activation for CIEO in Health Junior College - About the on-the-Spot-Training of Department Health Education -
Sung, Hwan-Kyung ;
Journal of Korean Acedemy of Dental Technology, volume 13, issue 1, 1991, Pages 53~59
This study aimed at inquiring into the basic theory on CIEO(the Cooperation between Industry and Educational Organizations), grasping and analyzing the present situation of the health junior college, the present condition of CIEO and into problem and seeking to find a solution to activate the CIEO of the health junior colleges. This study suggested five methods as the method of consolidating the on-the-spot-training as below : 1. The execution of the basic research for the on-the-spot-training. And the reorganization of the existing curriculum into the curriculum the industrial organization requires. 2. The participation in solving commonly the problems of the industrial organization and in education. The establishing of the guidance system assuming exclusive charge of the on-the-spot-training. 3. The extension of the period of the on-the-spot-training and the reorganization of an educational system. The submission of the evaluation sheet for the on-the-spot-training. 4. The securing of the educational dost spent on the on-the-spot-training and the imposition of benefits on the industrial organization. 5. The persistent support for the on-the-spot-training at the governmental dimension. It is required that the CIEO law should be enacted as the legal and institutional solution and that government should lend systematic support to the business enterprise exeuting the industrial educational cooperation such as the institutional support for and the imposition of benifits on the cost of research. The cost of research and development, the cost of internal education and training, and the cost of experiment and practice.
A Study on Cariogenic Food Intake of the Primary School Children in Subures of Seoul
Shin, Jong-Woo ;
Journal of Korean Acedemy of Dental Technology, volume 13, issue 1, 1991, Pages 61~78
Dental caries is one of the main factors to cause the teeth to be lost. Diet is the important factor in the development of dental caries. Today, Dental plaque control, Fluoride to pical application, Fissure sealing and Diet control are used to prevent dental caries. By the five day diet diary, the author surveyed the food in take of 600 infants aged from 10 to 12 in the subures of Seoul. Using the cariogenic food intake analysis form, the detergent food intake analysis form and the basic food intake analysis form, the data were collected, analysed and discussed. After discussing the results, the author concluded as follows : 1. The intake frequency of meals per day was 4.91 times, of which 2.74 times taken at meals and 2.17 times at between meals. Girls(5.00) had taken more times than boys(4.69) at meals an between meals. 2. The intake frequency of cariogenic food per day was 1.93 times, Liquid cariogenic food was taken 0.05 times at meals, and 0.58 times at between meals. Solid cariogenic food was taken 0.05 times at meals, and 0.08 times at between meals. Girls(1.67) had taken cariogenic food more times than boys(1.46). 3. The percentage of intake without detergent food of each intake time per head per day was 71.62% at meals, and 85.7% at between meals. The highest percentage was at evening meals. Boys(44.00%) had taken more detergent food than girls(56.71%). 4. Both boys and girls had the basic food intake taken enough only in 2nd group of basic food, lacking in the other 4 groups. Girls had taken the basic food comparatively more times than boys.
A Study on the Status of Management Structure to Dental Laboratory in Chun-Buk
Chung, Kyung-Pung ; Kim, Jong-In ;
Journal of Korean Acedemy of Dental Technology, volume 13, issue 1, 1991, Pages 79~97
To improve the management of dental laboratory through the research on the actual condition, this study posed questions on 36 dental laboratories. The results are as follows : 1. The establishment of dental laboratory in Chunbuk was increased between in 1980 and 1986. Especially it has been more increased since 1989. According to the proportion of population the number of the dental laboratories in Chunbuk was much more than that of other provinces and took the first place in september 1990. 2. The ratio between the unlicensed dental technician and the licensed was 24.83% and 67.11% each . The former must be replaced by the licensed. And the latter ought to try to improve their culture and technique. 3. Overtime payment must be paid for those who work above eight hours. 4. It takes 5 days at a minimum for the production of dental prosthesis with both stability and esthetics. 5. Every Saturday afternoon, Sunday and national holiday must be free. 6. Bonus must be paid 600% a year at a minimum. The system of retirement allowance should be active. All dental technicians ought to be affliated with their labor union and medica insurance. 7. Such dental restoration as porcelain and crown and bridge prosthesis must by increased to a degree between 30% and 50% at a minimum and the reduction system of charge for a dental technique has to be abolished. 8. The general working conditions of dental laboratory, especially pay and working hour must be improved. 9. To advance the service improvement of dental treatment and the banishment of illegal one, the medical insurance of crown and bridge prosthesis must be generally practised. 10. Ill case of the staff cull:lloyulent of dental laboratory, minimem wage system must be observed. 11. Directing dentist system on the ertablisment of dental laboratory must be abelished or wholly improved.
A Study on the Job Satisfaction and It's related Variables
Choi, Seog-Soon ;
Journal of Korean Acedemy of Dental Technology, volume 13, issue 1, 1991, Pages 99~122
This study was conducted to investigate the job satisfaction of the dental technicians and evalate the relationship between it’s scores and certain variables. One hundred eighty dental technicians were sampled from 300 among the 2552 dental technicians by wide distribution method, in September 1990. Data were collected by administering the instrument, the researcher developed for measuring the independent and dependent variables. The statistical methods utilized in this study were one-way analysis of variance, correlation and multiple regression analysis. The data were analyzed by SPSS(Statistical Package for Social Science), utilizing PC. The statistical significance was tested at 0.05 level. The major findings of the study were as follows : 1. The job satisfaction measuring instrument, the researcher developed, could measured the job satisfaction of dental technicians. The Maximum score of the instrument was 125, the highest score of dental technicians was 106, the lowest score was obtained 38, the mean score was 72.228 and standard deviation was 12.804. 2. The personal variables of dental technicians were related with the job satisfaction scores. The job satisfaction scores were positively correlated, at 0.01 level, with the scores of age(r=0.379), year(r=0.218), aptitude(r=0.415), marry(r=0.202), income(r=0.381), career(r=0.316). 3. The family variables scores of dental technicians were not correlated with the job satisfaction scores. 4. The personal characteristics of dental technicians were related with the job satisfaction. The job satisfaction score were positively correlated beyond the significant level, with the cheerfulness scores(r=0.398) and stability scores(r=0.224). 5. The job-related variables of the dental technicians were related with the job satisfaction scores. The correlation coefficient between job satisfaction scores and turnover scores was r=0.23, and quantity scores was r=0.300.