Go to the main menu
Skip to content
Go to bottom
REFERENCE LINKING PLATFORM OF KOREA S&T JOURNALS
> Journal Vol & Issue
Journal of Dental Rehabilitation and Applied Science
Journal Basic Information
Journal DOI :
Korean Academy of Stomatognathic Function and Occlusion
Editor in Chief :
Volume & Issues
Volume 28, Issue 4 - Dec 2012
Volume 28, Issue 3 - Sep 2012
Volume 28, Issue 2 - Jun 2012
Volume 28, Issue 1 - Mar 2012
Selecting the target year
Efficacy of Aloclair
for Treatment of Intraoral Ulcer Caused by Orthodontic Appliance
Lee, Ju-Hee ; Lee, Sang-Min ; Park, In-Young ;
Journal of Dental Rehabilitation and Applied Science, volume 28, issue 2, 2012, Pages 109~118
This experimental study was undertaken to evaluate the efficacy of polyvinylpyrrolidone-sodium hyaluronate(Aloclair
) in decreasing pain in orthodontic procedures. A total of 60 patients who were use Aloclair
ordered to were included. These patients were categorized by 3 cases; 1. Patients who were bonded with their first brackets. 2. Patients who were in pain with additional appliance such as anchorage devices. 3. Patients who got ulcer caused by appliances. We collected information about pain and assessed it using visual analogue scale. According to questionnaire, it took 3.5 min. for pain to subside and pair relief durated for 2.7 hours. Most patients in the study reported rapid pain relief and found Aloclair
easy and pleasant to use than wax. Accordingly Aloclair
provided raid relief of resting and provoked ulcer pain.
Retention of CAD/CAM Metal Copings Cemented on Short Titanium Abutments with Different Cements
Kim, Hyo-Jung ; Song, Eun-Young ; Yoon, Ji-Young ; Lee, Si-Ho ; Lee, Yong-Keun ; Oh, Nam-Sik ;
Journal of Dental Rehabilitation and Applied Science, volume 28, issue 2, 2012, Pages 119~126
State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.
Effect of Implant Preload on the Marginal Bone Stresses Studied by Three Dimensional Finite Element Aanalysis
Nam, Hyo-Jun ; Jo, Kwang-Hun ;
Journal of Dental Rehabilitation and Applied Science, volume 28, issue 2, 2012, Pages 127~138
This study is to assess the effect of preload level on the stress development at the marginal cortical bone surrounding implant neck. A finite element model was created for a single implant placed in the lower jaw bone. An external load of 100N was applied on the top of abutment at 30 degree with the implant axis in lingo-buccal direction. Five different preloads, i.e. 0, 200, 400, 600, 800N were applied to the abutment stem to investigate if and/or how the preload affects on the marginal bone stress. Differences in the marginal bone stress were recorded depending on the level of preload. On the other hand, the tensile stress on the marginal cortical bone decreased in models of higher preload. Preloads between abutment/fixture can increase compressive stresses in the marginal cortical bone although the amount may be insignificant as compared to those generated by functional forces.
Accuracy of Electronic Apex Locator in Using Different Root Canal Irrigant
Chang, Hoon-Sang ; Park, Se-Hee ; Cho, Kyung-Mo ; Kim, Jin-Woo ;
Journal of Dental Rehabilitation and Applied Science, volume 28, issue 2, 2012, Pages 139~145
The purpose of this study was to evaluate the accuracy of Root ZX and Sybron Mini in determining the working length using 2.5% Sodium Hypochlorite, 2% Chlorhexidine gel and saline. Donnelly's gelatin technique was used for measuring twenty extracted human teeth. Electronic working length was measured at the display 0.5 and 0.0 level of each electronic apex locator using a digital caliper to the nearest 0.01 mm. Each measurement was repeated for each different irrigants. Accuracy of Sybron Mini was not significantly different from the Root ZX in the three different irrigants, and there was no significant difference in the accuracy of electronic apex locators among the irrigants when used as recommended by manufacturer (measuring electronic working length at 0.0 level of Sybron Mini and at 0.5 level of Root ZX).
Finite Element Analysis of Bone Stress Caused by Horizontal Misfit of Implant Supported Three-Unit Fixed Prosthodontics
Lee, Seung-Hwan ; Jo, Kwang-Hun ;
Journal of Dental Rehabilitation and Applied Science, volume 28, issue 2, 2012, Pages 147~161
This study is to assess the effect of horizontal misfit of an implant supported 3-unit fixed prosthodontics on the stress development at the marginal cortical bone surrounding implant neck. Two finite element models consisting of a three unit fixed prosthodontics and an implant/bone complex were constructed on a three dimensional basis. The three unit fixed prosthodontics were designed either shorter (d=17.8mm model) or longer (d=18.0mm model) by 0.1mm than the span of two implants placed at the mandibular second premolar and second molar areas 17.9mm apart. Fitting of the fixed prosthodontics onto the implant abutments was simulated by a total of 6 steps, that is to say, 0.1mm displacement per each step, using DEFORM 3D (ver 6.1, SFTC, Columbus, OH, USA) program. Stresses in the fixed prosthodontics and implants were evaluated using von-Mises stress, maximum compressive stress, and radial stress as necessary. The d=17.8mm model assembled successfully on to the implant abutments while d=18.0mm model did not. Regardless if the fixed prosthodontics fitted onto the abutments or not, excessively higher stresses developed during the course of assembly trial and thereafter. On the marginal cortical bone around implants during the assembly, the peak tensile and compressive stresses were as high as 186.9MPa and 114.1MPa, respectively, even after the final sitting of the fixed prosthodontics (for d=17.8mm model). For this case, the area of marginal bone subject to compressive stresses above 55MPa, equivalent of the
, i.e. the reported threshold strain to inhibit physiological remodeling of human cortical bone, extended up to 2mm away from implant during the assembly. Horizontal misfit of 0.1mm can produce excessively high stresses on the marginal cortical bone not only during the fixed prosthodontics assembly but also thereafter.
Clinical Usefulness of Denture Adhesives
Lee, Jin-Han ; Lim, Young-Jun ; Lee, Seok-Hyung ; Lee, Joon-Seok ;
Journal of Dental Rehabilitation and Applied Science, volume 28, issue 2, 2012, Pages 163~169
Denture adhesive is the material using for enhancing retention and function of the denture. For a long time, denture adhesive was regarded as a repulsive material for dentist. However, it seems that the needs for using this is increasing. This study was planned to recognize the denture adhesive about kinds, components, and action mechanisms through literature review, and also evaluate its clinical effects and implications.
Analgesic Effect of Botulinum Toxin on Neuropathic Pain after Trigeminal Nerve Injury
Kim, Young-Gun ; Kim, Seong-Taek ;
Journal of Dental Rehabilitation and Applied Science, volume 28, issue 2, 2012, Pages 171~178
Botulinum toxin type A (BoNT-A) has been applied successfully to treat chronic migraine, dystonia, spasticity and temporomandubular disorders(TMDs) as well as frontal wrinkle and glabella wrinkle. Recently it has been reported that BoNT-A, reversibly blocks presynaptic acetylcholine release, also inhibits the release of substance P, CGRP(calcitonin gene related peptide) and glutamate related to peripheral sensitization and neurogenic inflammation in sensory nerve, In this study we reviewed animal nerve injury model such as rat and rabbit and identify the analgesic effect and mechanism of nerve injury pain after dental treatment.
A Literature Review on Implant Assisted Removable Partial Denture
Lee, Ji-Hye ; Kim, Dae-Gon ; Park, Chan-Jin ; Cho, Lee-Ra ;
Journal of Dental Rehabilitation and Applied Science, volume 28, issue 2, 2012, Pages 179~190
The installation of an implant in the distal extension area to assist a partial dentrue (IARPD) was used carefully in clinical situations. The purpose of this review on the IARPD is describing the concept, clinical results and guidelines of IARPD. For the review, a literature search was performed using the PubMed. The data from the literature suggest that the placement of the implants could improve function and patient satisfaction. In addition, IARPD reduced the residual ridge resorption. Longer and wider implant should be placed. Less than
angulation may be not harmful. To prevent the loosening of the abutment, modified abutment or resilient attachment should be used. However, the connection method between the clasp retention and IARPD should be considered for long time success. Moreover, longitudinal clinical studies are required for evaluation of IARPD.
Porcelain Laminate Veneer Restoration
Shin, Soo-Yeon ;
Journal of Dental Rehabilitation and Applied Science, volume 28, issue 2, 2012, Pages 191~200
The patients' demand for treatment of unesthetic anterior teeth is steadily growing. Accordingly, several treatment options such as porcelain laminate veneers(PLV) have been proposed to restore the esthetic appearance of the dentition. Porcelain laminate veneers are considered minimally invasive, but they also require removal of sound enamel. One critical step in the porcelain laminate veneer technique is the achievement of sufficient ceramic thickness, and several different strategies for tooth preparation can be found in the literature. This clinical report describes a step-by-step protocols for preparation of these restorations used with the silicone index from diagnostic wax-up and the acrylic resin mock-up. Conservative use of porcelain laminate veneers provided satisfactory esthetic outcomes and preserved sound tooth structure.
Immediate Connection of Customized Zirconia Abutment Using Flapless Guided Surgery: A Clinical Report
Lee, Gyeong-Je ; Choi, Byung-Ho ; Kim, Hee-Jun ; Jung, Seng-Mi ;
Journal of Dental Rehabilitation and Applied Science, volume 28, issue 2, 2012, Pages 201~212
There are some similar aspects at histological and morphological characteristics between the peri-implant tissue and periodontal tissue and the direct attachment between the titanium and soft tissue around the implant called as "Functional ankylosis" can prevent the apical infiltration of inflammatory and bone resorption around implant. But, the repeated connection and disconnection of the abutment can destroy the mucosal barrier of soft tissue around the implant and can cause the marginal bone resorption. The amount of marginal bone resorption may reduced if the prosthetic abutment is placed at that time of surgery. Connection of the prosthetic abutment at surgery was limited because the low accuracy of conventional method, but by using of Cone Beam Computed Tomography(CBCT) and guide surgery, the 3-dimensional accuracy of implant placement became much higher than before and it became possible. This is a clinical case of immediate connection of prosthetic abutment and provisional restoration by using of precise CBCT diagnosis and pre-fabricated zirconia customized abutment at surgery and the alternative method is described in this article because of the clinically contentable results.
Effect on the Externally Stained IPS e.max Press Porcelain Due to Tooth Brushing
Park, Chan ; Lee, Gyeong-Je ; Kim, Hee-Jung ;
Journal of Dental Rehabilitation and Applied Science, volume 28, issue 2, 2012, Pages 213~221
The purpose of this study was to evaluate the stability of external stain that long term attrition caused by tooth brushing affected the color variation of external stain of IPS e.max Press Porcelain. The specimen was made by IPS e.max Press LT ingots, and treated the shade of external staning as Orange, A, B, C, D After conducting horizontal toothbrush strokes about 11,000 / 22,000 / 44,000 / 66,000 / 88,000, Color changers of the external stained layer was measured with SpectroShade
MICRO(MHT, Italy). The result of this study was obtained as follows: 1. After 11,000 strokes, the color changes of shade were greater in Orange shade than the other 4 shade groups. And even though toothbrush strokes were increased until 88,000, there were no statistical significant color changes about the external stain shade variation. 2. The amount of color variation about increasing of toothbrushing strokes was irregular(no consistent increasing, or decreasing), and it was no statistical significant changes According to these results, the long term tooth-brushing doesn't affect the changes of external stain about IPS e.max press porcelain. And it doesn't reduce the stability of external stain clinically. Later, it will be needed to study other factors affecting the external stain.