Go to the main menu
Skip to content
Go to bottom
REFERENCE LINKING PLATFORM OF KOREA S&T JOURNALS
> Journal Vol & Issue
Journal of the Society of Naval Architects of Korea
Journal Basic Information
Journal DOI :
The Society of Naval Architects of Korea
Editor in Chief :
Volume & Issues
Volume 51, Issue 6 - Dec 2014
Volume 51, Issue 5 - Oct 2014
Volume 51, Issue 4 - Aug 2014
Volume 51, Issue 3 - Jun 2014
Volume 51, Issue 2 - Apr 2014
Volume 51, Issue 1 - Feb 2014
Selecting the target year
Effect of the Advance Ratio on the Evolution of Propeller Wake
Baek, Dong Geun ; Yoon, Hyun Sik ; Jung, Jae Hwan ; Kim, Ki-Sup ; Paik, Bu-Geun ;
Journal of the Society of Naval Architects of Korea, volume 51, issue 1, 2014, Pages 1~7
DOI : 10.3744/SNAK.2014.51.1.1
The present study numerically investigated the effect of the advance ratio on the wake characteristics of the marine propeller in the propeller open water test. Therefore, a wide range of the advance ratio(0.2
SST Model are considered. The three-dimensional vortical structures of tip vortices are visualized by the swirl strength, resulting in fast decay of the tip vortices with increasing the advance ratio. Furthermore, to better understanding of the wake evolution, the contraction ratio of the slip stream for different advance ratios is extracted from the velocity fields. Consequently, the slip stream contraction ratio decreases with increasing the advance ratio and successively the difference of the slip stream contraction ratio between J=0.2 and J=0.8 is about 0.1R.
Numerical Simulation of Turbulent Flow around KLNG Hull Form with Different Scale Ratio
Ha, Yoon-Jin ; Lee, Young-Gill ; Kang, Bong-Han ;
Journal of the Society of Naval Architects of Korea, volume 51, issue 1, 2014, Pages 8~15
DOI : 10.3744/SNAK.2014.51.1.8
In this study, flow characteristics around the hull form of KLNG are investigated by numerical simulations. The numerical simulations of the turbulent flows with the free surface around KLNG have been carried out at Froude number 0.1964 using the FLUENT 6.3 solver with Reynolds stress turbulence model. Several GEOSIM models are adopted to consider the scale effect attendant on Reynolds number. Furthermore, a full scale ship is calculated and the result is compared with the numerical results of GEOSIM models. The calculated results of GEOSIM models and the full scale ship are compared with the experiment data of MOERI towing tank test and Inha university towing tank test. Moreover, wake distribution on the propeller plane of the full scale ship is estimated using the numerical results of GEOSIM models. The prediction result is directly compared with the simulation result in full scale.
Development of a Generic-YWBS for Engineering Integrated Management of Sailing Yacht
Lee, Dong Kun ; Nam, Seung Hoon ; Jeong, Yong-Kuk ; Shin, Jong-Gye ;
Journal of the Society of Naval Architects of Korea, volume 51, issue 1, 2014, Pages 16~25
DOI : 10.3744/SNAK.2014.51.1.16
To develop a sailing yacht successfully, systematic engineering information is required including technologies from various companies and know-how about sailing yacht. The engineering information about sailing yacht has a complex and extensive structure. Therefore, a robust and high-level of management system is needed to manage the information. In this paper, we design and propose Generic-YWBS (Generic-Yacht Work Breakdown Structure), a work breakdown structure for sailing yachts. The Generic-YWBS is aimed at constructing sailing yachts and contains contents about product- and process-oriented information of sailing yachts. In addition, the Generic-YWBS plays an important role in managing the engineering information as a basic schema of database and system architecture. The Generic-YWBS is derived from fundamental WBS design processes and various rules about sailing yachts, for example, ISAF (International Sailing Federation) equipment rule and IRC rating rule, and a generic structure concept is applied for flexibility. The Generic-YWBS is applicable for various purposes. We designed a detailed code system in order to apply the Generic-YWBS to contents management system. The series of activities are realized through a web-based RIA(Rich Internet Application) program. This program manages the YWBS structure in an XML schema, and the Generic-YWBS management application offers a customizing function to be adapted in the field.
A Study of Assessment for Fatigue Strength of EH Steels at Fillet Welded Joints using 1mm Stress Method
Xin, Wen-Jie ; Oh, Dong-Jin ; Kim, Young-Nam ; Kim, Myung-Hyun ;
Journal of the Society of Naval Architects of Korea, volume 51, issue 1, 2014, Pages 26~33
DOI : 10.3744/SNAK.2014.51.1.26
In this study, Non-load-carrying EH Grade steels in fillet welded joints were evaluated with both the hot spot stress method and the 1mm stress method. The thickness effect criterion for fatigue strength evaluation of welded of welded steel structures recommendations of the IIW was used to evaluate the fatigue strength of EH40 and EH36 and Both EH40 and EH36 have been compared with FAT 125 curve recommended in the IIW. Furthermore, fatigue strength of the welded tow and the ground conditions for Non-load-carrying EH36 based on the 1mm stress method has been discussed.
Experimental Study of Ship Squat for KCS in Shallow Water
Yun, Kunhang ; Park, Byoungjae ; Yeo, Dong-Jin ;
Journal of the Society of Naval Architects of Korea, volume 51, issue 1, 2014, Pages 34~41
DOI : 10.3744/SNAK.2014.51.1.34
When a ship sails in shallow water, it is well known that an additional sinkage and trim of the ship(squat) is caused by change of hydrodynamic force between the seabed and the bottom of a ship. In this paper, to examine this phenomenon by model tests, the squat of KCS model ship at a low speed is measured by the vision based ship motion measurement system during HPMM tests. Various combinations of a ship speed, a rudder angle and a drift angle were tested at three depth conditions(H/T = 1.2, 1.5 & 2.0). As a result, increase of the ship's speed and ship's drift angle caused an increase in ship squat, but the ship's rudder angle did not. The rate of increase in ship squat was the most at H/T = 1.2 condition. Lastly these experimental results are compared to the results by three empirical formulas and two CFD methods. The tendency of ship squat measured by experiment is similar to those of empirical formulas.
The Structural Strength Assesment of Lifting Lug
Heo, Nam-Hak ; Lee, Joo-Sung ;
Journal of the Society of Naval Architects of Korea, volume 51, issue 1, 2014, Pages 42~50
DOI : 10.3744/SNAK.2014.51.1.42
Lifting lugs are frequently used in shipyard to transportate and turn over blocks. As the shipbuilding technology develops, blocks has become bigger and bigger, and block management technology takes a more important role in shipbuilding to enhance the productivity. For the sake of economic as well as safe design of lug structure, more rigorous analysis is needed. In this study in order to investigate the strength characteristics of two type of lug, that is, D and T type lugs, non-linear strength analysis has been carried out to compare the ultimate strength characteristics of two types of lug varying in-plane and out-of-plane loading directions. Based on the present numerical analysis results, it can be drawn that T type lug is superior to D type lug from view points of ultimate strength and deformation.
A Construction of the Network Type Database Management System for Model Ice
Lee, Jae-Hwan ; Kim, In-Soo ; Choi, Bong-Kyun ; Lee, Chun-Ju ;
Journal of the Society of Naval Architects of Korea, volume 51, issue 1, 2014, Pages 51~57
DOI : 10.3744/SNAK.2014.51.1.51
In the KIOST MOERI model ice basin, a lot of experiments to find the material properties of model ice and model ship tests are being performed. And therefore many data information was produced, yet it was saved as excel data format. In order to manage and use the data more effectively and systematically, a proper database management is required. To make realistic engineering DBMS(database management system), understanding of test process, the usage of data, design of data schema and computer language and system management are required. In this paper, basic design process and usage of DBMS based on network and multiple user concept is introduced.
Numerical Simulation of Spilling Breaker using the Modified Marker-density Method
Jeong, Kwang-Leol ; Lee, Young-Gill ;
Journal of the Society of Naval Architects of Korea, volume 51, issue 1, 2014, Pages 58~66
DOI : 10.3744/SNAK.2014.51.1.58
Numerical simulations for the flows containing free surface remain difficult problems because the drastic differences of physical properties of water and air, The difference of densities makes the solution instable in particular. For the stabilities of the solutions, the most typical methods to simulate free surface flows, such as Volume Of Fluid(VOF) and Level-Set(LS) methods, impose transient zones where the physical prosperities are continuously distributed. The thickness of the transient zone is the source of the numerical errors. The other side, marker-density method does not use such a transient zone. In the traditional marker-density method, however, the air velocities of free surface cells are extrapolated from the water velocity, and the pressures on the free surface are extrapolated from the air pressures for the stability of the solution. In this study, the marker-density method is modified for the decrease of such numerical errors. That is, the pressure on the free surface is determined to coincide with the pressure gradient terms of the governing equations, and the velocity of free surface cells are calculated with the governing equations. Two-dimensional steady spilling breakers behind of a submersed hydrofoil and three-dimensional spilling breaker near a wedge shaped ship model are simulated using INHAWAVE-II including the modified marker-density(MMD) method. The results are compared with the results of Fluent V6.3 including VOF method and several published research results.
Numerical Prediction of Ship Hydrodynamic Performances using Explicit Algebraic Reynolds Stress Turbulence Model
Kim, Yoo-Chul ; Kim, Kwang-Soo ; Kim, Jin ;
Journal of the Society of Naval Architects of Korea, volume 51, issue 1, 2014, Pages 67~77
DOI : 10.3744/SNAK.2014.51.1.67
In this study, Explicit Algebraic Reynolds Stress Model (EARSM) which is based on the existing
model has been applied to the flow field analysis around ship hulls. Existing transport equations for the turbulent kinetic energy and the dissipation rate are used in almost the same form and anisotropy terms of Reynolds stresses are newly considered. The well-known KVLCC2 and KCS hull forms are selected as validation cases, which were also used in 2010 Workshop on CFD in Ship Hydrodynamics. In case of KVLCC2 double model, comparison of mean velocity distribution, turbulent kinetic energy, and Reynolds stresses near the propeller plane has been carried out and wave elevation and wave profiles have been additionally studied for KCS and KVLCC2 with free surface models. Some improved results for mean velocity distribution at the propeller plane have been obtained while there is little change in free surface wave profiles.
Design Sensitivity and Optimum Design of Monopile Support Structure in Offshore Wind Turbine
Lee, Ji-Hyun ; Kim, Soo-Young ;
Journal of the Society of Naval Architects of Korea, volume 51, issue 1, 2014, Pages 78~87
DOI : 10.3744/SNAK.2014.51.1.78
Recently the offshore wind turbine development is requested to be installed off south-west coast and Jeju island in Korea. Reliable and robust support structures are required to meet the demand on the offshore wind turbine in harsh and rapidly varying environmental conditions. Monopile is the most preferred substructure in shallow water with long term experiences from the offshore gas and oil industries. This paper presents an optimum design of a monopile connection with grouted transition piece (TP) for the reliable and cost-effective design purposes. First, design loads are simulated for a 5 MW offshore wind turbine in site conditions off the southwest coast of Korea. Second, sensitivity analysis is performed to investigate the design sensitivity of geometry and material parameters of monopile connection based on the ultimate and fatigue capacities according to DNV standards. Next, optimization is conducted to minimize the total mass and resulted in 30% weight reduction and the optimum geometry and material properties of the monopile substructure of the fixed offshore wind turbine.
Study on Dynamics Modeling and Depth Control for a Supercavitating Underwater Vehicle in Transition Phase
Kim, Seon Hong ; Kim, Nakwan ;
Journal of the Society of Naval Architects of Korea, volume 51, issue 1, 2014, Pages 88~98
DOI : 10.3744/SNAK.2014.51.1.88
A supercavitation is modern technology that can be used to reduce the frictional resistance of the underwater vehicle. In the process of reaching the supercavity condition which cavity envelops whole vehicle body, a vehicle passes through transition phase from fully-wetted to supercaviting operation. During this phase of flight, unsteady hydrodynamic forces and moments are created by partial cavity. In this paper, analytical and numerical investigations into the dynamics of supercavitating vehicle in transition phase are presented. The ventilated cavity model is used to lead rapid supercavity condition, when the cavitation number is relatively high. Immersion depth of fins and body, which is decided by the cavity profile, is calculated to determine hydrodynamical effects on the body. Additionally, the frictional drag reduction associated by the downstream flow is considered. Numerical simulation for depth tracking control is performed to verify modeling quality using PID controller. Depth command is transformed to attitude control using double loop control structure.