Go to the main menu
Skip to content
Go to bottom
REFERENCE LINKING PLATFORM OF KOREA S&T JOURNALS
> Journal Vol & Issue
Transactions of the Society of Information Storage Systems
Journal Basic Information
Journal DOI :
The Society of Information Storage Systems
Editor in Chief :
Volume & Issues
Volume 5, Issue 2 - Sep 2009
Volume 5, Issue 1 - Mar 2009
Selecting the target year
The Improvement of Performance in an Ultra small Camera Iris-Shutter Device using Topology Optimization
Park, Soon-Ok ; Yoo, Jeong-Hoon ;
Transactions of the Society of Information Storage Systems, volume 5, issue 2, 2009, Pages 53~57
This study is concerned with the design of a camera iris-shutter device for producing force. The camera iris-shutter with yoke should have a smaller size and a bigger magnetic force than the previous model. Since the induced magnetic force operates shutter movement, the magnetic force maximization for a given input current is an important issue. To achieve the goal, new system is designed by the topology optimization method. The design is refined through the design of experiments to find the detail camera iris shutter design satisfying design constraints.
Research of Slider Behavior over Patterned Media
Kim, Ki-Hoon ; Kim, Seok-Hwan ; Lee, Yong-Hyun ; Lee, Sang-Jic ; Park, No-Cheol ; Park, Young-Pil ; Park, Kyoung-Su ;
Transactions of the Society of Information Storage Systems, volume 5, issue 2, 2009, Pages 58~63
This paper describes the effects of slider behavior over patterned media. The flying characteristics of a slider over patterned media are different from slider flying behavior over conventional plane disk. In order to perform the most realistic simulation of slider flying characteristics over patterned disk surfaces, our simulation approach virtually distributes the grooves on the slider ABS instead of on the disk surface. Also, we define SSFA which is steady-state slider flying attitude. The results show that the more patterned size is small and height is large, the more increased SSFA is. Also if patterned distance is small, then SSFA is increased. In addition, we analyzed the effects of patterned shapes.
Optical characteristics of discs for near-filed recording
Min, Cheol-Ki ; Park, No-Cheol ; Park, Kyoung-Su ; Park, Young-Pil ;
Transactions of the Society of Information Storage Systems, volume 5, issue 2, 2009, Pages 64~69
In this paper, we investigate field distribution and interference pattern in the exit pupil and in the focal region. Also, we compare with metal and dielectric substrate for near-field recording. To obtain field distribution, we use modified vector diffraction theory and Zernike Polynomials. Finally, we design and optimize refractive index and thickness of disk for near-field surface recording and cover-layer incident recording.
Analysis of Unload Characteristics by Ramp Tilt
Lee, Yong-Hyun ; Kim, Ki-Hoon ; Kim, Seok-Hwan ; Lee, Sang-Jik ; Park, No-Cheol ; Park, Young-Pil ; Park, Kyoung-Su ; Kim, Cheol-Soon ; Yoo, Jin-Gyu ;
Transactions of the Society of Information Storage Systems, volume 5, issue 2, 2009, Pages 70~75
Most hard disk drives uses load/unload technology because of benefits as like an increased areal density, a reduced power consumption and an improved shock resistance. However, ramp tilt induced by ramp manufacture and assembly causes mechanical problems such as unload fail in case of exceeding ramp tolerance. In this paper, we focus on experimental analysis for unloading characteristics affected by ramp tilt. We repeatedly perform load/unload test as 500,000 cycles for original model and ramp tilt model. This paper shows that it is possible to analyze unload characteristics through measuring scratch and wear of suspension lift-tab, ramp, suspension dimple-flexure and disk. We also identify structural relation between suspension lift-tab and ramp through scratch and wear of suspension lift-tab and ramp. As the result of measurement and analysis, we can investigate decrease of unloading performance in ramp tilt model.
Base Structure Design of Laptop HDD for Anti-Shock Performance
Lim, Seung-Ho ; Park, No-Cheol ; Park, Young-Pil ; Park, Kyoung-Su ; Seol, Woong ; Kim, Kyung-Tae ;
Transactions of the Society of Information Storage Systems, volume 5, issue 2, 2009, Pages 76~81
Mobile devices have become an important part of daily life. This is especially true of laptop PCs, which are portable enough to be used almost anywhere. Laptop PCs, however, cannot be nomadic if each component is not robust enough to endure rugged laptop operating environment. Generally, external shock makes collision on head-disk interface and damage to read-write performance. To minimize the likelihood of failure, shock analysis must be incorporated into the design of hard disk drive in laptop. This research explores the structure modification of laptop HDD base, for improving shock performance using finite element analysis which considers the flexibility of whole HDD structure. FE model is verified by modal test and finely tuned. Then we obtained the transmitted acceleration of spindle and pivot and the relative displacement between disk and slider head as shock response. Based on shock simulation, the structural dynamics modification is performed and the primary design parameters are extracted.
Characteristics and Assessment of Printer Toner Adhesion
Lee, Jung-Eun ; Kim, Kwang-Il ; Kim, Hyun-Joon ; Kim, Dae-Eun ;
Transactions of the Society of Information Storage Systems, volume 5, issue 2, 2009, Pages 82~88
Understanding the adhesion behavior and characteristics of toner film is required to achieve image and text printing with high quality resolution. Toner can be considered as a thin film coating on a media such as paper or polymer film. Quantitative measurement of adhesion characteristics of the thin film is important to assess the reliability of the system. In this work the main objective was to investigate the adhesion characteristic between the toner and the media by ramp loading scratch test method. The scratch test may be used to obtain quantitative information about the adhesion of the film to the substrate. In the scratch test a diamond tip was used to scratch the surface of the toner film under an increasing normal load until the toner detached or fractured. The critical load (LC) was obtained from the experimental results. Also, the relationship between the critical load and the adhesive strength of the interface between the substrate and the toner was obtained by measuring the normal and tangential forces during the scratch test. Finally, theoretical analysis of the toner scratch characteristics was performed based on Benjamin and Weaver theory, Plowing model, and Laugier model.
Measurement of noise characteristics of an image sensor
Lee, Tae-Kyoung ; Hahn, Jae-Won ;
Transactions of the Society of Information Storage Systems, volume 5, issue 2, 2009, Pages 89~95
We setup the system to measure the noise characteristics of the 5M complementary metal-oxide semiconductor (CMOS) image sensor by generic measurement indicator of Standard mobile imaging architecture (SMIA) which is one of internal standard of mobile imaging architecture. To evaluate the effect of environment and setting parameters, such as temperature and integration time, we measure the variation of the dark signal, dynamic range and fixed pattern noise of image sensor. We also detect the number of defective pixels and cluster defects defined as adjacent single defect pixels at 5M CMOS image sensor. Then, we find the existence of some cluster defects in experiment, which are not expected in calculation.
Effect of Flexible Cable and Friction Force of Small Form Factor Hard Disk Drive
Kim, Seok-Hwan ; Lee, Yong-Hyun ; Kim, Ki-Hoon ; Lee, Sang-Jik ; Park, Young-Pil ; Park, No-Cheol ; Park, Kyoung-Su ; Jung, Moon-Gyo ;
Transactions of the Society of Information Storage Systems, volume 5, issue 2, 2009, Pages 96~101
In recent years, the demand for portable digital devices such as cellular phone, digital camera, and MP3 player has been largely increased. To meet the requirements of such portable applications the information storage devices with smaller size, higher capacity, and lower power consumption are needed. A small form factor (SFF) HDD using a load/unload (L/UL) system is one of the appropriate alternatives to satisfy these requirements. Due to complexity of L/UL process and mechanism, it is required to investigate for better understanding the effects of design parameters. Among the various design parameters, flexible cable and friction force on the L/UL ramp become important to the dynamic characteristics of L/UL process as the system is miniaturized. The program for L/UL simulation which considers the effect of flexible cable and L/UL ramp is needed. Unfortunately, there is hardly any commercial program for the L/UL simulation except the Computer Mechanics Laboratory (CML) air bearing design program and the CML L/UL simulation code. Furthermore, the design parameters such as flexible cable and the L/UL ramp are not considered in the CML L/UL simulation code. So we embody the L/UL simulation considering flexible cable and an L/UL ramp by using the ANSYS/LS-DYNA. In this thesis, the effects of flexible cable and friction force on the dynamic characteristics and the performances of the L/UL process are studied. Numerical simulation and related experiments are carried out and compared each other.