Go to the main menu
Skip to content
Go to bottom
REFERENCE LINKING PLATFORM OF KOREA S&T JOURNALS
> Journal Vol & Issue
Journal of the Korean Institute of Electrical and Electronic Material Engineers
Journal Basic Information
Journal DOI :
The Korean Institute of Electrical and Electronic Material Engineers
Editor in Chief :
Volume & Issues
Volume 29, Issue 9 - Sep 2016
Volume 29, Issue 8 - Aug 2016
Volume 29, Issue 7 - Jul 2016
Volume 29, Issue 6 - Jun 2016
Volume 29, Issue 5 - May 2016
Volume 29, Issue 4 - Apr 2016
Volume 29, Issue 3 - Mar 2016
Volume 29, Issue 2 - Feb 2016
Volume 29, Issue 1 - Jan 2016
Selecting the target year
Modeling of Reversible and Irreversible Threshold Voltage Shift in Thin-film Transistors
Jung, Taeho ;
Journal of the Korean Institute of Electrical and Electronic Material Engineers, volume 29, issue 7, 2016, Pages 387~393
DOI : 10.4313/JKEM.2016.29.7.387
Threshold voltage shift has been observed from many thin-film transistors (TFTs) and the time evolution of the shift can be modeled as the stretched-exponential and -hyperbola function. These analytic models are derived from the kinetic equation for defect-creation or charge-trapping and the equation consists of only reversible reactions. In reality TFT's a shift is permanent due to an irreversible reaction and, as a result, it is reasonable to consider that both reversible and irreversible reactions exist in a TFT. In this paper the case when both reactions exist in parallel and make a combined threshold voltage shift is modeled and simulated. The results show that a combined threshold voltage shift observed from a TFT may agrees with the analytic models and, thus, the analytic models don't guarantee whether the cause of the shift is defection-creation or charge-trapping.
Decrease of Interface Trap Density of Deposited Tunneling Layer Using CO
Gas and Characteristics of Non-volatile Memory for Low Power Consumption
Lee, Sojin ; Jang, Kyungsoo ; Nguyen, Cam Phu Thi ; Kim, Taeyong ; Yi, Junsin ;
Journal of the Korean Institute of Electrical and Electronic Material Engineers, volume 29, issue 7, 2016, Pages 394~399
DOI : 10.4313/JKEM.2016.29.7.394
The silicon dioxide (
) was deposited using various gas as oxygen and nitrous oxide (
) in nowadays. In order to improve electrical characteristics and the interface state density (
) in low temperature, It was deposited with carbon dioxide (
) and silane (
) gas by inductively coupled plasma chemical vapor deposition (ICP-CVD). Each
. It showed
gas was about 2.55 times better than
gas. After 10 years when the thin film was applied to metal/insulator/semiconductor(MIS)-nonvolatile memory(NVM), MIS NVM using
) on tunneling layer had window memory of 2.16 V with 60% retention at bias voltage from +16 V to -19 V. However, MIS NVM applied
) to tunneling layer had 2.48 V with 61% retention at bias voltage from +20 V to -24 V. The results show
and it improves the operating voltage.
Operating Characteristics of Amorphous GeSe-based Resistive Random Access Memory at Metal-Insulator-Silicon Structure
Nam, Ki-Hyun ; Kim, Jang-Han ; Chung, Hong-Bay ;
Journal of the Korean Institute of Electrical and Electronic Material Engineers, volume 29, issue 7, 2016, Pages 400~403
DOI : 10.4313/JKEM.2016.29.7.400
The resistive memory switching characteristics of resistive random access memory (ReRAM) using the amorphous GeSe thin film have been demonstrated at Al/Ti/GeSe/
poly Si structure. This ReRAM indicated bipolar resistive memory switching characteristics. The generation and the recombination of chalcogen cations and anions were suitable to explain the bipolar switching operation. Space charge limited current (SCLC) model and Poole-Frenkel emission is applied to explain the formation of conductive filament in the amorphous GeSe thin film. The results showed characteristics of stable switching and excellent reliability. Through the annealing condition of
, the possibility of low temperature process was established. Very low operation current level (set current: ~
, reset current: ~ nA) was showed the possibility of low power consumption. Particularly,
poly Si based GeSe ReRAM could be applied directly to thin film transistor (TFT).
Microstructure and Dielectric Properties of Low Temperature Sintering (Ba
Yoo, Ju-Hyun ;
Journal of the Korean Institute of Electrical and Electronic Material Engineers, volume 29, issue 7, 2016, Pages 404~407
DOI : 10.4313/JKEM.2016.29.7.404
In this study, to develop low temperature sintering capacitor composition ceramics with the good dielectric properties,
(BCTZ) ceramics were prepared by the conventional solid-state reaction method. The effects of
addition on the dielectric properties and microstructure was investigated. The XRD patterns demonstrated that all the specimens showed Perovskite phase, and secondary phases are indicated in the measurement range of XRD. And also, temperature coefficient of capacitance(TCC) of all the specimen sintered at
showed +3~-56% except for x=0.006. For all the specimens, observed one peak was tetragonal cubic difuse phase transition temperature(Tc), which is located in the vicinity of room temperature.
Optical Transmission Characteristics of Tellurium-based Phase-change Chalcogenide Thin Films
Yoon, Hoi Jin ; Bang, Ki Su ; Lee, Seung-Yun ;
Journal of the Korean Institute of Electrical and Electronic Material Engineers, volume 29, issue 7, 2016, Pages 408~413
DOI : 10.4313/JKEM.2016.29.7.408
The dielectric thin films applied to multi-colored semitransparent thin film solar cells have been extensively studied. In this work, we prepared GeSbTe and GeTe chalcogenide thin films using magnetron sputtering, and investigated their optical and phase-change properties to replace the dielectric films. The changes of surface morphology, sheet resistance, and X-ray diffraction of the Te-based chalcogenide films support the fact that the amorphous stability of GeTe films is superior to that of GeSbTe films. While both amorphous GeSbTe and GeTe films thinner than 30 nm have optical transparency between 5% and 60%, GeTe films transmit more visible light than GeSbTe films. It is confirmed by computer simulation that the color of semitransparent silicon thin film solar cells can be adjusted with the addition of GeSbTe or GeTe films. Since it is possible to adjust the contrast of the solar cells by exploiting the phase-change property, the two kinds of chalcogenide films are anticipated to be used as an optical layer in semitransparent solar cells.
A Study on the Metal Mesh for CuN
Multi-layer Touch Electrode by Reactive Magnetron Sputtering
Kim, Hyun-Seok ; Yang, Seong-Ju ; Noh, Kyeong-Jae ; Lee, Seong-Eui ;
Journal of the Korean Institute of Electrical and Electronic Material Engineers, volume 29, issue 7, 2016, Pages 414~423
DOI : 10.4313/JKEM.2016.29.7.414
In the present study, the
layer the partial pressure ratio Cu metal of Ar and
gas using a DC magnetron sputtering device, was generated by the In-situ method.
layer was able to obtain a surface reflectance reduction effect from the advantages of the process and the external light.
layer is gas partial pressure, DC the Power, the deposition time variable transmittance in response to the thickness and partial pressure ratio, the reflectance was measured.
gas ratio 10:10(sccm), DC power 0.35 A, was derived Deposition time 90 sec optimum conditions. Thus, according to the optimal thickness and the composition ratio was derived surface reflectance of 20.75%. In addition, to derive the value of
Ra surface roughness of 0.467. It was derived
band-gap energy of about 2.2 eV. Thus, to ensure a thickness and process conditions can be absorbed to maximize the light in a wavelength band in the visible light region. As a result, the implementation of the
base line resistance of using the Cu metal. This is, 5 inch Metal mesh TSP(L/S:
) is in the range of the reference operation.
Analysis on Power Burden of HTSC Module due to Fault Current's Amplitude of a Flux-Lock Type SFCL with Two Triggering Currents
Han, Tae-Hee ; Lim, Sung-Hun ;
Journal of the Korean Institute of Electrical and Electronic Material Engineers, volume 29, issue 7, 2016, Pages 424~428
DOI : 10.4313/JKEM.2016.29.7.424
In this paper, the power burden of High-TC superconducting (HTSC) module comprising the flux-lock type superconducting fault current limiter (SFCL) with two triggering currents during the fault period was analyzed. The short-circuit tests for the simulated power system with the SFCL in the different fault positions, which were expected to affect the amplitude of the fault current, were carried out. Through the comparative analysis on the power burden of the HTSC modules, the proposed flux-lock type SFCL was confirmed to be effective to divide into two power burdens according to the amplitude of the fault currents.
Analysis of Partial Discharge Characteristics in SF
Kim, Sun-Jae ; Wang, Guoming ; Park, Seo-Jun ; Kil, Gyung-Suk ; An, Chang-Hwan ;
Journal of the Korean Institute of Electrical and Electronic Material Engineers, volume 29, issue 7, 2016, Pages 429~434
DOI : 10.4313/JKEM.2016.29.7.429
This paper deals with the characteristics of partial discharge (PD) for the purpose of a condition based maintenance (CBM) of gas insulated switchgears (GIS) in power equipment. Four types of electrode systems such as a protrusion on enclosure (POE), a particle on spacer (POS), a free particle (FP) and a Floating were designed and fabricated. PD pulses were measured using UHF sensor with a frequency range of 300 MHz~1.4 GHz and a DAQ with a sampling rate of 250 MS/s. Discharge inception voltage (DIV), discharge extinction voltage (DEV), and phase resolved partial discharge (PRPD) were analyzed depending on electrode systems. The average DIV in the POS was 28.8 kV. It was about 1.7 times higher than that in the FP, which was the lowest value of 17.2 kV. The FP shuffled and jumped at the applied voltage of 23.5 kV. Over 95% of PD pulses in the POE were generated in the negative polarity (
) of applied voltage. The results showed the phase (
)-magnitude (dBm) of PD pulses by UHF sensor, a cluster was formed separately depending on electrode systems.
Development of Ag Nanowire Patterning Process Using Sacrificial Layer
Ha, Bonhee ; Jo, Sungjin ;
Journal of the Korean Institute of Electrical and Electronic Material Engineers, volume 29, issue 7, 2016, Pages 435~439
DOI : 10.4313/JKEM.2016.29.7.435
We developed a Ag nanowire patterning technique using a water-soluble sacrificial layer. To form a water-soluble sacrificial layer, germanium was deposited on the substrate and then water-soluble germanium oxide was simply formed by thermal oxidation of germanium using a conventional furnace. The formation of Ag nanowire patterns with various line and space arrangements was successfully demonstrated using this patterning process. The main advantage of this patterning technique is that it does not use a strong acid etchant, thereby preventing damage to the Ag nanowire during the patterning process.
Improvement on Surface and Electrical Properties of Polymer Insulator Coated TiO
Thin Film by Atomic Layer Deposition
Kim, Nam-Hoon ; Park, Yong Seob ;
Journal of the Korean Institute of Electrical and Electronic Material Engineers, volume 29, issue 7, 2016, Pages 440~444
DOI : 10.4313/JKEM.2016.29.7.440
Titanium oxide (
) thin films were synthesized on polymer insulator and Si substrates by atomic layer deposition (ALD) method. The surface and electrical properties of
films synthesized at various ALD cycle numbers were investigated. The synthesized
films exhibited higher contact angle and smooth surface. The contact angle of
films was increased with the increase of ALD-cycle number. Also, the rms surface roughness of films was slightly rough with the increase of ALD-cycle number. The leakage current on
film surface synthesized at various conditions were uniformed, and the values were decreased with the increase of ALD-cycle number. In the results, the performance of
films for self-cleaning critically depended on a number of ALD-cycle.
SnS-embedded High Performing and Transparent UV Photodetector
Park, Wang-Hee ; Ban, Dong-Kyun ; Kim, Hyunki ; Kim, Hong-Sik ; Patel, Malkeshkumar ; Yoo, Jeong Hee ; Kim, Joondong ;
Journal of the Korean Institute of Electrical and Electronic Material Engineers, volume 29, issue 7, 2016, Pages 445~448
DOI : 10.4313/JKEM.2016.29.7.445
Transparent UV photodetector was achieved by using wide bandgap metal oxide materials. In order to realize transparent heterojunction UV photodetector, n-type ZnO and p-type NiO metal oxide materials were employed. High light-absorbing SnS layer was inserted into the n-ZnO and p-NiO layers. High-performing UV photodetector was realized by ZnO/SnS/NiO/ITO structures to provide extremely fast response times (Fall time:
and rise time:
) and high rectifying ratio. The use of functional SnS-embedded photodetector would provide a route for high functional photoelectric devices.
A Study on the Diagnostic Algorithm for Arc Flash of Power Equipment
Lee, Deok-Jin ;
Journal of the Korean Institute of Electrical and Electronic Material Engineers, volume 29, issue 7, 2016, Pages 449~453
DOI : 10.4313/JKEM.2016.29.7.449
The amount of electrical energy has been increased with the rapid development of the industrial society. Accordingly, operating voltage of the power equipment and facility capacity are continuously increasing. Development trends of recent high-voltage electrical equipment are ultra high-voltage, large-capacity and compact. Early diagnosis of a failure of the power plant has been emerging as an important task as to supply high quality power to users. In this study, we have tried to develope an algorithm for distinguishing an arc fault signal generated in the power plant by using UV sensor.