Go to the main menu
Skip to content
Go to bottom
REFERENCE LINKING PLATFORM OF KOREA S&T JOURNALS
> Journal Vol & Issue
Journal of the Korean Society for Precision Engineering
Journal Basic Information
Journal DOI :
Korean Society of Precision Engineering
Editor in Chief :
Volume & Issues
Volume 27, Issue 12 - Dec 2010
Volume 27, Issue 11 - Nov 2010
Volume 27, Issue 10 - Oct 2010
Volume 27, Issue 9 - Sep 2010
Volume 27, Issue 8 - Aug 2010
Volume 27, Issue 7 - Jul 2010
Volume 27, Issue 6 - Jun 2010
Volume 27, Issue 5 - May 2010
Volume 27, Issue 4 - Apr 2010
Volume 27, Issue 3 - Mar 2010
Volume 27, Issue 2 - Feb 2010
Volume 27, Issue 1 - Jan 2010
Selecting the target year
On-Machine Measurement System Development of Hole Accuracy using Machine Vision
Kim, Min-Ho ; Kim, Tae-Yeong ;
Journal of the Korean Society for Precision Engineering, volume 27, issue 5, 2010, Pages 7~13
The integrity and accuracy of the drilling hole are decided by positional error, diameter error, the roundness, the straightness, the cylindericity, size of the burr, the surface roundness and others. Among these parameters, positional error and diameter error have the most important parameters. The diameter error has been widely studied, but there has been little research done about the positional error due to the difficulty of measuring it. The measurement of hole location and diameter would be performed by CMM(Coordinate Measurement Machine). However, the usage of CMM requires much time and cost. In order to overcome the difficulties, we have developed a hole location and diameter error measuring device using machine vision. The developed measurement device attached to a CNC machine can determine hole quality quickly and easily.
Effect of Cutting Condition on the Tool Wear in Turning of the Presintered Low Purity Alumina Ceramics
Lee, Jae-Woo ;
Journal of the Korean Society for Precision Engineering, volume 27, issue 5, 2010, Pages 14~21
In this study, presintered low purity alumina ceramics were machined with various tools to clarify the effects of the tool material, cutting condition and tool geometry on machinability. The main conclusions obtained were as follows. (a)The wear of tungsten carbide tool becomes smaller with the increase of the feed and clearance angle, and with the decrease of rake angle, especially exhibiting considerably smaller wear with both the decrease of rake angle and the increase of clearance angle. (b) So far as turning the ceramic presintered at low temperature, the diamond tool shows the best performance with higher feed. (c) The effect on the tool wear of the feed, clearance angle and rake angle becomes smaller in turning the ceramic presintered at higher temperature. (d) The tool wear is not severely affected by the depth of cut.
A Study on Thermal Deformation Compensation in the Molding of Aspheric Glass Lenses
Lee, Dong-Kil ; Kim, Hyun-Uk ; Cha, Du-Hwan ; Lee, Hak-Suk ; Kim, Hye-Jeong ; Kim, Jeong-Ho ;
Journal of the Korean Society for Precision Engineering, volume 27, issue 5, 2010, Pages 22~26
Recently, due to the tremendous growth of media technology, demands of the aspheric glass lens which is a high-performance and miniaturized increase gradually. Generally, the aspheric glass lens is manufactured by Glass Molding Press (GMP) method using tungsten carbide (WC) mold core. In this study, the thermal deformation which was occurred by GMP process was analyzed and applied it to compensate the aspheric glass lens. The compensated lens was satisfied that can be applied to the actual specifications.
Design Parameter Analysis of the Proportional Control Valve for Wheel-Loader Automatic Transmission
Park, Young-Jun ; O, Joo-Young ; Yun, Ung-Kwon ; Lee, Guen-Ho ;
Journal of the Korean Society for Precision Engineering, volume 27, issue 5, 2010, Pages 27~35
A loader used for uploading materials into truck is a kind of construction equipment. Mainly, a wheel loader is applied to construction work. Recently, an automatic transmission for the wheel loader is used to help drivers get the repetitive works done comfortably. It is composed of geartrain, clutch pack, hydraulic control system and TCU. Especially, a high-performance proportional control valve and its control algorithm is demanded to achieve the shift quality during a change of speed. In this paper, the commercial package program was used in order to justify model of the proportional control valve and simulate it. Steady-state and dynamic characteristics of PCV were analyzed to classify attractive forces and hydraulic control characteristics. This model also was verified the validity compared to the experimental result. Using the developed model, performances of PCV were predicted as studying design parameters.
A Study on the Development of Web-based Preventive Maintenance System for the Driverless Rubber-Tired K-AGT
Son, Young-Tak ; Chun, Hwan-Kyu ; Uhm, Ho-Young ; Lee, Ho-Yong ; Han, Seok-Youn ; Suh, Myung-Won ;
Journal of the Korean Society for Precision Engineering, volume 27, issue 5, 2010, Pages 36~47
The Korean Railroad Research Institute (KRRI) has developed the rubber tired AGT system (Model: K-AGT) between 1999 and 2005. The K-AGT is a light rail transit system does not require a driver and generally operates on an elevated railroad for transporting passengers. Accidents caused by driverless vehicles can severely affect social confidence, safety and economy therefore, it is very important to minimize the occurrences of such faults, and to accurately perform detailed maintenance tasks and thoroughly investigate the cause of any repeated failures. This research develops the web-based Preventive Maintenance (PM) system for the KAGT train system. The framework of the PM system is based on performing a reliability analysis and a failure mode effects analyses (FMEA) procedure on all the sub-systems in the K-AGT system. Out of the devices that have a low reliability, the high failure ranked devices are included high in the list for performing the overall maintenance plans. Through registration of historical failure data, the reliability indexes can be updated. Such a process is repeated continuously and can achieve very accurate predictions for device operational life times and failure rates. Therefore, this research describes the development of the overall PM system consists of a reliability analysis module, a failure mode effect analysis module, and maintenance request module.
The Optimization of the Press-type Door Hinge of the Full-sized Car
Yang, Ji-Hyuck ;
Journal of the Korean Society for Precision Engineering, volume 27, issue 5, 2010, Pages 48~55
The Door hinge is a very important part for door sagging performance of a vehicle. It is divided into two classes as a forge- and press-type according to a manufacturing technique. The press-type door hinge is cheap, but shows low strength. To apply the press-type door hinge to a fullsized car with satisfactory door sagging performance, we optimized the design parameters of the door hinge using the DFSS method. As a result, the effective design parameters of the press-type door hinge with good door sagging performance were obtained.
The Development Process of Vehicle Roof Carrier using One Side Release System
Jang, Dong-Hwan ; Ko, Byung-Doo ; Lee, In-Chul ;
Journal of the Korean Society for Precision Engineering, volume 27, issue 5, 2010, Pages 56~62
This paper presents the development process of roof carrier assembly using a one side release system for a vehicle. An RV(Recreational Vehicle) or SUV(Sports Utility Vehicle) has a roof carrier system on an upper surface of a roof panel for loading large or long size baggage. Such a roof carrier system is comprised of a roof rack longitudinally mounted on a roof panel and cross bar perpendicularly installed in the horizontal direction. Several locking mechanisms used in most vehicle roof carrier systems are composed with both side releasable locking ones. The obvious drawback to this arrangement is that when the user desires to reposition the cross bar, first one of the locking members must be unlocked and then the user must walk around to the opposite side of the vehicle to unlock the other member. In this paper, we proposed a newly locking mechanism, which allows a user simultaneously place both locking members of the roof carrier in locked and unlocked positions. In order to estimate design compatibility, structural and modal analysis is performed. Furthermore, a prototype based on the proposed design has been made, and then durability test carried out. From the simulation and experimental results, the proposed roof carrier system is proved effective and safe.
Manufacturing Process Design of Aluminum Alloy Bolt
Kim, Ji-Hwan ; Chae, Soo-Won ; Han, Seung-Sang ; Son, Yo-Hun ;
Journal of the Korean Society for Precision Engineering, volume 27, issue 5, 2010, Pages 63~68
The use of aluminum alloy parts in the automotive industry has been increasing recently due to its low weight compared with steel to improve fuel efficiency. Companies in the auto parts' manufacturing sector are expected to meet the government's strict environmental regulations. In this study, manufacturing process of aluminum alloy bolt has been designed from forming to heat treatment. Bolt forming process is composed of cold forging for body and rolling for thread. In this study only cold forging process is considered by employing the finite element method. In the cold forging process, preform shape was designed and damage value was considered for die design. Two steps of forging process has been developed by the simulation and a prototype was manugactured accordingly. As a final process, solution heat treatment and aging process was employed. A final prototype was found to meet the required specifications of tensile strength and dimension.
Basic Design and Structural and Optical Glass Characteristic Study of Chalcogenide Aspheric Lens
Ko, Jun-Bin ; Kim, Jeong-Ho ; Byun, Dong-Hae ;
Journal of the Korean Society for Precision Engineering, volume 27, issue 5, 2010, Pages 69~74
An increasing interest towards the investigations of chalcogenide glasses has been observed in the past years. This interest is due to their specific properties, as well as to the possibilities for their application in different fields of science. The optical devices, working on the basis of photoinduced phase transition between amorphous and crystalline state in the chalcogenide glasses, are a perspective for the micro- and nano-electronics. Here we were analysis basic physical properties for Ge-As-Se and As-Se chalcogenide glasses samples for characteristic for a planning of chalcogenide aspheric lens. From differential DTA/TG results, activation energies of the crystallizations of
were approximately 3.6 eV and 3.3 eV, respectively.
Blank Design of SPFH 590 Steel Sheet for Stamping of Center Hinge of Automotive via Analysis of Transfer Forming Process with Multi-Stages
Ahn, Dong-Gyu ; Song, Dong-Han ; Sohn, Sang-Sik ; Han, Gil-Young ;
Journal of the Korean Society for Precision Engineering, volume 27, issue 5, 2010, Pages 75~84
The aim of this paper is to design the blank shape of SPFH 590 high strength steel for stamping of the center hinge of automotive via numerical analyses and experiments for multi-stages transfer forming process. Three-dimensional elasto-plastic finite element analyses for the transfer forming process with six stages were performed using a commercial code AUTOFORM V4.2. The influence of the blank shape on the formability and the shape conformity were quantitatively examined through the FE analyses. From the results of the FE analysis, a feasible shape of the blank and the forming load were estimated. Stamping experiments were carried out using the proposed blank shape. The results of experiments were shown that the center hinge parts with the desired shapes can be manufactured successfully as the proposed blank shape is used. Through the comparison of the results of the experiments with those of the analyses, it was shown that the estimation of blank shape using the FE analysis is a proper methodology to create a feasible shape of the blank for the center hinge of automotive.
Single-cell Electroporation and Gene Transfection using MEMS-based Microdevice with Cantilever-type Microelectrode
Cho, Young-Hak ; Kim, Beom-Joon ;
Journal of the Korean Society for Precision Engineering, volume 27, issue 5, 2010, Pages 85~91
In this paper, we present details on fabrication of single-cell electroporation microdevice, practical experiments of single-cell electroporation with our fabricated microdevice. Also, the continuous electroporation for the continuous flow of cells is used for high-throughput electroporation. The delivery efficiency and cell viability tests are provided and the successful GFP transfection into cells is also evaluated with a fluorescent microscope after electroporation. This device enables to reduce the size of samples and thus the use of small amount of reagents. Also, it makes it possible to permit to avoid cell discrimination (transfected cells versus non-transfected cells) encountered when traditional bulk electroporation is held.
Evaluation of Hormone Deficiency in Vertebral Body: Analysis of Bone Structure and Quality
Kim, Chi-Hoon ; Woo, Dae-Gon ; Park, Ji-Hyung ; Lee, Beob-Yi ; Kim, Chi-Hyun ; Kim, Han-Sung ;
Journal of the Korean Society for Precision Engineering, volume 27, issue 5, 2010, Pages 92~101
This study evaluated the structure and quality of osteoporotic vertebral bone. To induce osteoporosis, eight rats were ovariectomized (OVX). All rats were divided into two groups (Normal group: 4, OVX group: 4). Total lumbar vertebrae for each rat were scanned by in-vivo
at 0, 4 and 8 weeks. Morphological characteristics (BV/TV, Tb.Th, Tb.N, Tb.Sp and SMI) were calculated by in-vivo
image analyzer. Three dimensional finite element models were analyzed to investigate bone strength of OVX and Normal groups. Moreover, the elastic modulus was quantitatively analyzed to evaluate the quality changes of osteoporotic bone. In the OVX group, BV/TV, Tb.Th and Tb.N were significantly decreased at all the lumbar over time (p<0.05). We also investigated a contrary tendency in Tb.Sp and SMI, compared to the above results in each group. A degree of alteration of mechanical characteristics in OVX group was decreased over measuring time (p<0.05). Bone quality presented by distribution of elastic modulus was improved in the Normal group more than OVX group. The findings of the present study indicated that both bone structure and quality of whole lumbar could be tracked and detected by analyzing the morphological and biomechanical characteristics of bones, based on a nondestructive method.
Design and Control of Seat Mechanism for Multi-postures Controllable Wheelchair
Bae, Ju-Hwan ; Kim, Gyu-Seok ; Ryu, Je-Cheong ; Moon, In-Hyuk ;
Journal of the Korean Society for Precision Engineering, volume 27, issue 5, 2010, Pages 102~111
This paper presents a design of seat mechanism for multi-postures controllable wheelchair. The possible seat postures are reclining, tilting, standing, which are controlled by four seat mechanisms using four linear actuators. The seat mechanisms designed in this study are reclining, tilting, forward-tilting, and elevation mechanism. Three postures except standing are controlled by corresponding mechanisms, but the standing posture is performed by combination of the reclining and the forward-tilting mechanism. Posture control system is composed of PID controllers and a planner to determine a feasible posture based on a posture transition diagram. Simulation results show that the seat mechanism and its control system are applicable to a multi-postures controllable wheelchair.