Go to the main menu
Skip to content
Go to bottom
REFERENCE LINKING PLATFORM OF KOREA S&T JOURNALS
> Journal Vol & Issue
Journal of the Korea Safety Management and Science
Journal Basic Information
Journal DOI :
Korea Safety Management and Science
Editor in Chief :
Volume & Issues
Volume 14, Issue 4 - Dec 2012
Volume 14, Issue 3 - Sep 2012
Volume 14, Issue 2 - Jun 2012
Volume 14, Issue 1 - Mar 2012
Selecting the target year
A Study on the Comprehension of the Industrial Safety Policy Direction by Job Characteristics of Corporate Safety Managers
Kim, Jong-In ; Choi, Seo-Yeon ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 1~12
DOI : 10.12812/ksms.2012.14.4.001
This study investigated the comprehension of the occupational safety policy direction by job characteristics of the safety managers at 211 workplace selected under the Occupational Safety and Health Act. As for the characteristics of the subjects' firms, there was difference in their perception on the occupational safety policy direction by their region, type, scale, and the existence of labor union. Regarding the job characteristics of the subjects, there was difference in the comprehension of the occupational safety policy direction by their age, experience and department. This study suggests that the government policy as well as the awareness about safety by management and safety managers need to be changed by analyzing the comprehension of occupational safety policy direction by the job characteristics of corporate occupational safety managers.
Applying psychosocial approach in industrial safety research
Ahn, Kwan-Young ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 13~21
DOI : 10.12812/ksms.2012.14.4.013
This paper tried to apply psychosocial factors in industrial safety research. Since Zohar's(1980) publication of safety climate in the field of safety research, this approach have been done by many researchers. Here, this paper reviewed the relationship between safety climate factors(safety rule, prevention, superior attitude, social support) and safety compliance, and the moderating effects of work condition, required skill and age. Based on the responses from 233 employees in Kangwon province industry, hierarchical regressional analysis showed that all safety climate factors(safety rule, prevention, superior attitude, social support) have positive relationship with safety compliance. Safety rule appeared to be more positively related with safety compliance, while work condition is more favorable and worker is older. But social support appeared to be more positively with safety compliance, while work condition is more unfavorable, and also prevention appeared to be more positively with safety compliance, while worker is more younger.
Safety Management Information System in Plants Construction Work
Park, Jong-Keun ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 23~29
DOI : 10.12812/ksms.2012.14.4.023
There are insufficient models that find problems and solutions for accident prevention through risk assessment and suggest safe work process and work instruction from foundation works to finish work for accident decrease. This paper presents a quantitative risk assessment model by analysis of risk factors in each process such as appurtenant works, temporary works, structural works, equipment work, finishing work and etc based on accident examples and investigation on actual condition in plants construction work. In addition, the safety management system was developed to perform risk assessment of plants construction and use it for effective safety training for labor.
A Study on the Fire Safety Plan for Building Construction
Jeong, Myeong-Jin ; Lee, Myeong-Gu ; Ham, Eun-Gu ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 31~37
DOI : 10.12812/ksms.2012.14.4.031
Recently buildings are constructed in larger and higher scales and becoming more complex. However from small to large scale buildings and on construction sites there still are fire safety accidents that occur continuously. Therefore to improve fire safety plan, examining the actual fire safety management and understanding fire risk analysis Using Fire Modeling through Computer Simulation. On this study, the permissible evacuation times were estimated for smoke fall, temperature, CO concentration, viability, etc. Fire safety management plans for fire safety were suggested.
A study on the influence of air traffic controller's leadership characteristics and hazardous attitudes on the team effectiveness
Jang, Jung-Ha ; Sin, Hyon-Sam ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 39~49
DOI : 10.12812/ksms.2012.14.4.039
The purpose of this study was to investigate the influence of air traffic controller's leadership characteristics and hazardous attitudes on the team effectiveness. The effectiveness make use of team efficacy and team commitment. Leadership characteristics and hazardous attitudes make use of the contents of a CRM manual. The study showed following results. 1) Leadership characteristics has a positive influence on the team effectiveness. 2) Hazardous attitudes has a partially bad influence on the team effectiveness. This study was conducted under the auspice of civil and military ATC facilies and by participation of devoting ATC controller's.
Effect of Emotional Labor, Job and Psychosocial Stress, and Fatigue of Beauty Industry Workers on the perceived Symptoms of Musculoskeletal Diseases
Lee, Hye-Young ; Choi, Seo-Yeon ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 51~58
DOI : 10.12812/ksms.2012.14.4.051
This study attempted to evaluate the direct and indirect effect of emotional labor, job and psychosocial stress, and fatigue of beauty industry workers on their musculoskeletal diseases. The findings of this study showed that, among the workers with perceived symptoms of musculoskeletal diseases, the body part with the most commonly occurring symptom was the shoulder, followed by neck, low back, wrist, arm, foot and knee. As for the effect of work-related psychological factors on musculoskeletal diseases, it was found that the workers with musculoskeletal diseases were more affected by emotional labor and fatigue than non-symptom workers. It was also shown that when their job stress increased, the fatigue level also increased, though their psychosocial stress decreased. In addition, it was found that both direct and indirect effects of emotional labor on fatigue were high, and the indirect effect of job stress through fatigue on musculoskeletal diseases was significant.
Study on Experience of Industrial Accidents and Awareness Level for Beauty Product Safety of Beauty Industry Employee
Choi, Seo-Yeon ; Hur, Kuk-Kang ; Park, Dong-Hyun ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 59~70
DOI : 10.12812/ksms.2012.14.4.059
This study compared data regarding industrial accidents and awareness level for beauty product safety for four main parts of beauty industry such as hair-care, nail-care, skin-care, and make-up. Major risk factors in beauty industry are dust, musculoskeletal disorders, and organic solvent of beauty product in order of percentage. The specific types of industrial accidents in beauty industry are mainly associated with musculoskeletal system such as cuts, sprain, and varicose vein. They are mainly compensated by personal budget. The awareness levels of chemical and heavy metal containment for beauty product by beauty industry employee were 77.2% and 59.1% respectively. Most employee confirmed only important items of labelling requirement of beauty product. Also, most employee did not understand MSDS(Materila Safety Data) for chemicals used in beauty industry. Only 38.1% of beauty industry employee has had safety education while most employee (73.6%) realized that they needed safety education. Also, safety education supervised by KOSHA(Korea Occupational Safety and Health Agency) was the most preferred. This study would be good basis for safe and healthy working environment of beauty industry employee.
A Study on Paradigm Shift of Supply Chain Risk Management for SMEs
Yoon, Seung-Ok ; Lee, Chang-Ho ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 71~77
DOI : 10.12812/ksms.2012.14.4.071
It is very important the collaboration and risk management of supply chain between the parent company and its partners in the supply chain risk management(SCRM). It was known that the SCRM approach is very different between a large enterprise and a small and medium-sized enterprise. This paper deals with the suggestion about SCRM structure for a small and medium-sized enterprise. This SCRM structure consist of risk identification, risk assessment, and risk mitigation. We expect that this SCRM structure promote the collaboration between a parent company and its partners to alleviate the supply chain risk.
A Study on Introduction and Application of Green SCM
Lee, Gong-Seob ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 79~83
DOI : 10.12812/ksms.2012.14.4.079
This study analyzes introduction state of Green SCM technology in domestic and overseas area and suggests how to reduce greenhouse gases of logistics in the future. Thus, introduction state of Green SCM was reviewed by building and integrating logistic-related informatization systems such as WMS and TMS. And how to apply the system to track toxic substance in supply chain was performed to manage toxic substance. Therefore, it will be necessary to develop a device to display and collect vehicle condition & log through OBD-II, which is widely adopted, and hardware to measure, collect, and monitor carbon dioxide emission and power consumption of fixed facilities.
A Study on Analysis between Accidents Caused by Human Errors and Personal Characteristics of Railway Drivers
Yum, Byeoung-Soo ; Gal, Won-Mo ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 85~91
DOI : 10.12812/ksms.2012.14.4.085
To verify the effect of driver's personal characteristics of driver on the accident frequency through railway accidents caused by human errors and the relationship with aptitude test. To prove the relevance between the driver's personal characteristics and human error accidents. Accident data from 2010 to 2011 was analyzed which collected from a train crew department in K national corporation, and 31 drivers gave an personal interview from Sep. 2011 to Nov. 2011 who had controlled a train alone and caused an accident. Compared between driver's personal characteristics and accident rate, and accident induction possibility surveyed from normal person and disqualified in aptitude tests. Accidents was occurred with the age 40s (27%) and 50s (25%), and with the experience between 15 years and 20 years (38%) and over 20 years (30%). Because more aged, more experienced, it can be seen in the correlation between driver's age and accidents induction caused by human errors like illusion. First of all it must be checked whether working conditions and environmental factors are human error-prone. Most accidents occur when received civil complaints or manager at the riding. Therefore accidents can be prevented when investigated through subsequent surveys how often human error happens, even though no accident, and safety device installed based on the error frequency.
Effects of Different Car Pedal Systems and Driving Skills on Drivers' Lower Extremity Postures during Fatigue
Hah, Chong-Ku ; Oh, Hyung-Sool ; Jang, Young-Kwan ; Yi, Jae-Hoon ; Oh, Seong-Geun ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 93~105
DOI : 10.12812/ksms.2012.14.4.093
The purpose of this study was to investigate drivers' postures in different car pedal systems and skilled levels under fatigue. Twenty four subjects participated in this experiment. For three-dimensional analyses, six cameras (Proreflex MCU-240, Qualisys) were used to acquire raw data. The parameters were calculated and analyzed with Visual-3D. In conclusion, ROAs of two leg-pedal system were less than one leg pedal system by pattern analysis. Through statistical tests, skilled levels have effects on ROAs(X, Y, Z) of ankle joint at breaking a pedal and ROAs(Y, Z) of ankle joint at accelerating a pedal. Also, car pedal systems have effects on ROAs(Y, Z) of ankle joint, and ROA(Z) of knee joint at accelerating a pedal. In addition, skilled levels and car pedal systems (cross effects) have an effect on ROA(Z) of ankle joint. These findings suggested that we should improve a present single pedal system.
On the Integration of Systems Design and Systems Safety Processes from an Integrated Data Model Viewpoint
Kim, Young-Min ; Lee, Jae-Chon ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 107~116
DOI : 10.12812/ksms.2012.14.4.107
The issues raised so far in the development of safety-critical systems have centered on how effectively the safety requirements are met in systems design. The systems are becoming more complex due to the increasing demand on the functionality and performance. As such, the integration of both the systems design and systems safety processes becomes more important and at the same time quite difficult to carry out. In this paper, an approach to solving the problem is presented, which is based on an integrated data model. To do so, the data generated from the inputs and outputs of the systems design and systems safety processes are analyzed first. The results of analysis are used to extract common attributes among the data, thereby making it possible to define classes. The classes then become the cores of the interface data model through which the interaction between the two processes under study can be modeled and interpreted. The approach taken has also been applied in a design case to demonstrate its value. It is expected that the results of the study could play a role of the stepping stone in extending to the architecture development of the integrated process.
Development of the Active RFID based Smart Occupancy Detection System
Choi, Yeon-Suk ; Park, Byoung-Tae ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 117~123
DOI : 10.12812/ksms.2012.14.4.117
For an effective energy management in intelligent buildings it is necessary to gather information about position/absence of people and the level of population. In this paper the smart occupancy detection system using the active RFID is developed to satisfy such a demand based on the results of previous research. First of all the design considerations and functions of the system are introduced. In sequence the functions of the system is presented, and then the performance of the developed system is tested and verified through various field tests. The developed core technology can be also applied to other fields such as security, healthcare, smart home, etc.
An Empirical Study on the Safety Education and Safety Accident Status in Child-Care Facilities and Homeroom Teacher's Recognition about the Safety Education Range and Methods
Kim, In-Jung ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 125~136
DOI : 10.12812/ksms.2012.14.4.125
In most child-care facilities, homeroom teachers take the responsibilities for safety education, which has been conducted in class hours on a regular basis. It was found that most homeroom teachers are lacking in teacher training opportunities, and the younger they are, the less training experience they get. Teachers with fewer teaching careers had a greater interest in safety education and training courses. In addition, homeroom teachers have been utilizing monthly toddler magazines as a method to acquire knowledges for safety education and prevention of safety accidents. The safety accidents which have most frequently occurred in care-care facilities turned out to be stumble and tear, and infants aged 3 years or younger were found to be easily exposed to the safety accidents mainly due to the frolic between peers during the free-choice activity time. The homeroom teachers recognized only traffic safety education among the range of safety training courses, which varied depending on teaching career such as traffic safety education and indoor/outdoor safety environment training, etc. In addition, it turned out that the safety training methods were limited to the utilization of discussion techniques, role-playing, description and demonstration.
The Type of Employment and Occupational Injuries - Based on Household Survey -
Park, Jong-Shik ; Rhee, Kyung-Yong ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 137~145
DOI : 10.12812/ksms.2012.14.4.137
This study was planned to analyze the effect of the types of employment on work-related injury experience. The types of employment may have influenced on working conditions including the exposure to risk factors. Korean Working Conditions Survey have collected the various working conditions as household survey with structured questionnaire. The probability of work-related injury of self-employed is more than that of regular worker. But there is no difference of probability of work-related injury experience between regular and irregular worker controlled by general characteristics and the exposure to risk factors. Authors have found that the type of employment have indirect effect on work-related injury experience via the exposure to risk factors. The result of this study may be heuristic one because of data limitation as cross sectional survey data. In future, well designed survey data can evaluate the effect of the type of employment on safety and health status.
A Study on the Introduction of MFCA for Emergy Saving in Supply Chain
Lee, Doo-Yong ; Jang, Jung-Hwan ; Zhang, Jing-Lun ; Jho, Yong-Chul ; Lee, Chang-Ho ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 147~152
DOI : 10.12812/ksms.2012.14.4.147
Supply chain including transportation expend the 21% of domestic energy consumption. It is necessary to diminish the excess energy usage at entire supply chain. This paper deals with the application of MFCA(Material Flow Cost Accounting) for SCM to save energy consumption. We construct the material center corresponding to each logistics function in order to apply the MFCA for GCM(Green Chain Management). We also construct the MFCA framework which consists of MFCA Database Management, MFCA Visualization, GCM Data Integration, GCM Data Tracking, and MFCA Data Predict & Assignment. We expect to help determining the range of logistics function to apply the MFCA for GCM.
A case study on algorithm development and software materialization for logistics optimization
Han, Jae-Hyun ; Kim, Jang-Yeop ; Kim, Ji-Hyun ; Jeong, Suk-Jae ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 153~168
DOI : 10.12812/ksms.2012.14.4.153
It has been recognized as an important issue to design optimally a firm's logistics network for minimizing logistics cost and maximizing customer service. It is, however, not easy to get an optimal solution by analyzing trade-off of cost factors, dynamic and interdependent characteristics in the logistics network decision making. Although there has been some developments in a system which helps decision making for logistics analysis, it is true that there is no system for enterprise-wise's on-site support and methodical logistics decision. Specially, E-biz process along with information technology has been made dramatic advance in a various industries, there has been much need for practical education closely resembles on-site work. The software developed by this study materializes efficient algorithm suggested by recent studies in key topics of logistics such as location and allocation problem, traveling salesman problem, and vehicle routing problem and transportation and distribution problem. It also supports executing a variety of experimental design and analysis in a way of the most user friendly based on Java. In the near future, we expect that it can be extended to integrated supply chain solution by adding decision making in production in addition to a decision in logistics.
Basic research, according to the inspection of crane equipment
An, Tae-Keon ; Shim, Kyu-Hyung ; Rie, Dong-Ho ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 169~175
DOI : 10.12812/ksms.2012.14.4.169
Self-Inspection is being used in the workplace hazardous, dangerous machinery and equipment to build capacity for the voluntary safety risks due to use of machinery and prevention of industrial accidents that inspect facilities for safety issues, is to check. However, December 31, 2008 as part of Article 36 of the Occupational Safety and Health Act (safety inspection), the financial vanish as the self-test, Safety inspection program has been changed., In each individual workplace that creates its own standards and regulations to use the existing inspection system is in some cases. This study is located in the southeast industrial complex as a risk reducer manufacturer, machine-based target zones in S Corp owns most of the crane based on the results of the tests is to analyze the problem. Then check the results - to bring its measures and information you need to know for sure is to propose.
Optimization for Transportation Routing on Logistics Network by Simulation Analysis
Kim, Young-Chul ; Seong, Haeng-Ki ; Hwang, Dae-Sung ; Kim, Jung-Hyun ; Lee, Hae-Uk ; Kang, Kyung-Sik ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 177~184
DOI : 10.12812/ksms.2012.14.4.177
Logistics cost of domestic company has been improved continuously and annually, it is still higher than other main comparative countries. So, in this study, as optimizing the logistic network of distribution, it was trying to find methods decreasing logistics cost and storage cost, which occupies 86% of logistics cost of companies. through the efficiency of transportation and delivery routing, it could be also possible to decrease the logistics cost. And, it is also checked to find the logistics cost could be decreased by 10% by optimizing the routes of transportation and delivery, improving the transportation mode, etc.
Analysis of selection in preference to 3th logistics through logistics activities -Manufacturer and publisher approach-
Kim, Ki-Hong ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 185~191
DOI : 10.12812/ksms.2012.14.4.185
According to result of this paper, shipping companies tend to choose a third party logistics company that is able to provide consulting services that is the core of the administration of distribution. Shipping companies expect that the consulting services would be able to increase the efficiency through utilizing not logistics functions of shipping, unloading, storage, and information but performance indices of logistics activities. Because shipping companies generally regard that third party logistics not only has no expertise but also is small, in order to activate third-party logistics industry, the consulting services should be improved.
Analysis of Logistics Effects in Enterprises by the Medium of Standardization of Packing Containers
Won, You-Jon ; Kim, Jin-Ho ; Kim, Dong-Kyu ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 193~203
DOI : 10.12812/ksms.2012.14.4.193
In the limitless competition era of the 21st century, cost reduction is being highlighted as one of survival strategies of businesses. The first item for cost reduction of businesses is logistical costs. The most keenly required thing for this is to remove unnecessary elements, and the best way to realize it to cut down processes using automatic facilities. Packing container in logistics is like a facility. This study is intended to analyze reduction of costs, improvement of business process and reduction of working force through standardization of standardization, and logistics effects through improvement of environmental images in enterprises.
A Sustainable BSC-IT based Framework for Assessing the Strategic Impacts of Green IT Initiatives
Ruiz, Luis ; Park, Jeong-Sun ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 205~210
DOI : 10.12812/ksms.2012.14.4.205
We don't have time to waste, time is running, and the global warming is an issue that concerns to all of us. Information technology, which on a global level is responsible for 2% of emission of greenhouse gases. However, the remaining 98% is seen as an opportunity for IT to help our planet, our companies and our society. The purpose of this paper is to analyze green information technology (IT) initiatives and their strategic impact. And to have done this, we develope and create a very useful balanced-scorecard framework to explain, understand, and identify the direct and indirect contribution of green IT initiatives. The green IT evaluation framework, called here a sustainable green IT balanced scorecard, integrates the four BSC-IT perspectives with the Zuboff's automate/informate goals of information systems and the contribution of the sustainability (economic, social and environment). This study also seeks to answer the following questions: 1) what are the driving forces for implementing green IT initiatives? 2) How can an analytical framework be built to systematically analyze the benefits and strategic contribution of green IT initiatives? And 3) how green IT initiatives impact the strategic goals of a firm and how they can contribute to the triple bottom line? The framework demonstrates to be useful as a management tool to hopefully integrate environmental and social management with the general management of a company. Besides, the strategy map and measures for each cell of the framework are provided.
Smart Grid Utilization of modern technology in agriculture
Kim, Kwang-Man ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 211~218
DOI : 10.12812/ksms.2012.14.4.211
In this paper, we propose a system architecture of the AMI to be applied in the modern agricultural sector. Agricultural electricity costs in South Korea is very inexpensive compared with other industries. It is expected to increase oil prices to rise over the medium to long term so the facilities must to be installed for farmers in terms of energy savings and energy costs. The research and development of plant factory which can replace the ills of modern agriculture is very active. The technologies of smart grid and plat factory are good paradigm of next generation agricultural sector. Good use of smart grid technologies, the traditional energy consumption industries, agriculture sector can be self-sufficiency industry. In this article the AMI architecture is developed and it will be applicable for modern farmers plant factory.
Embedded systems through cost-effective real-time production information systems development
Jung, Young-Deuk ; Park, Joo-Sik ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 219~227
DOI : 10.12812/ksms.2012.14.4.219
The trend is going to obtain the accurate and fast information to the development of information technology and electronic technology as an important part of corporate management. Press equipment to produce products that target is small and medium businesses. Became so economical real-time production information system(R-PIS) model has been implemented. R-PIS configure the embedded hardware and PC application software. This system is easy maintenance and upgrade that general-purpose PC and a modular hardware devices. Consists of modules such as wireless communication, LCD, Key-pad, memory control, and sensor signal. R-PIS is efficient materials and product management to maximize the productivity of the enterprise.
Correspondence Strategy for Big Data's New Customer Value and Creation of Business
Koh, Joon-Cheol ; Lee, Hae-Uk ; Jeong, Jee-Youn ; Kim, Kyung-Sik ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 229~238
DOI : 10.12812/ksms.2012.14.4.229
Within last 10 years, internet has become a daily activity, and humankind had to face the Data Deluge, a dramatic increase of digital data (Economist 2012). Due to exponential increase in amount of digital data, large scale data has become a big issue and hence the term 'big data' appeared. There is no official agreement in quantitative and detailed definition of the 'big data', but the meaning is expanding to its value and efficacy. Big data not only has the standardized personal information (internal) like customer information, but also has complex data of external, atypical, social, and real time data. Big data's technology has the concept that covers wide range technology, including 'data achievement, save/manage, analysis, and application'. To define the connected technology of 'big data', there are Big Table, Cassandra, Hadoop, MapReduce, Hbase, and NoSQL, and for the sub-techniques, Text Mining, Opinion Mining, Social Network Analysis, Cluster Analysis are gaining attention. The three features that 'bid data' needs to have is about creating large amounts of individual elements (high-resolution) to variety of high-frequency data. Big data has three defining features of volume, variety, and velocity, which is called the '3V'. There is increase in complexity as the 4th feature, and as all 4features are satisfied, it becomes more suitable to a 'big data'. In this study, we have looked at various reasons why companies need to impose 'big data', ways of application, and advanced cases of domestic and foreign applications. To correspond effectively to 'big data' revolution, paradigm shift in areas of data production, distribution, and consumption is needed, and insight of unfolding and preparing future business by considering the unpredictable market of technology, industry environment, and flow of social demand is desperately needed.
An Approach to Designing Visual Forms for Process Control Displays Based on Ecological Interface Design
Ham, Dong-Han ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 239~246
DOI : 10.12812/ksms.2012.14.4.239
A Study on the Factors Influencing the Relationship between Suppliers and Manufacturers in the Process of New Product Development: with a Focus on CEO's Characteristics and Performance
Na, Sang-Gyun ; Kim, Jin-Mo ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 247~258
DOI : 10.12812/ksms.2012.14.4.247
It seems most important for a manufacturing company to be well aware of its relationship with suppliers. This is why it is essential to analyze and control the structural relationship among CEO's characteristics, relations between suppliers and manufacturers and new product development performances affected by such relations. The present study may be summed up as follows: First, from the analysis of characteristics of manufacturing company's CEO and relations between suppliers and manufacturers, it could be verified that CEO's characteristics exercised influence upon sharing of product development process and upon cooperation for technical manpower, but not upon sharing of core technologies, signifying the fact that nothing could be more important than the role of CEO who has strong will to improve his or her relations with suppliers; and Second, from the analysis of relations between suppliers and manufacturers as well as relations between management and new product development performances, it became evident that both management performance and product development performance were affected by sharing of product development process. It was also known that cooperation for technical development process had influence upon the product development performance but not upon the management performance. Furthermore, the analysis showed that both management performance as well as product development performance were affected by sharing of core technologies.
A Study on Application of Synchronized Production System for H Automobile Plant in China
Zhang, Jing-Lun ; Lee, Doo-Yong ; Jang, Jung-Hwan ; Yoo, Sung-Hee ; Lee, Chang-Ho ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 259~264
DOI : 10.12812/ksms.2012.14.4.259
Automobile market was grown up by 1.7% at the first half of 2012 comparison with 2011 in China and this growth trend will be continued for a while. Under this market environment the China automobile companies expand the production capacity and result in heightening the intense competition for companies. This paper deals with the more efficient production line and production logistics through SPS(Synchronized Production System) with construction of MES(Manufacturing Execution System) in H automobile company in China. In plastic painting line we can simultaneously prepare the production quantity and delivery time according to assembly production plan by introducing MES. We can reduce the excess production and result in extreme reduction of inventory.
A Study on MES Construction for Automobile Plant in China
Lee, Doo-Yong ; Zhang, Jing-Lun ; Jang, Jung-Hwan ; Yoo, Sung-Hee ; Lee, Chang-Ho ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 265~270
DOI : 10.12812/ksms.2012.14.4.265
This paper deals with the application and effects of MES for H automobile plant in China. There existed the production planning and the different work order in PL painting plant, but we can simultaneously prepare the painting parts and parts delivery and assembly according to painting color by introducing MES. We can respond the change of production planning and operate integratively the PL painting, parts storage and parts delivery and then we can results in reasonable logistics. We obtained the exact production information, correct work order, precise delivery order. We obtained not only the improvement of logistics but also the reduction of inventory.
A Study on Contract Attributes, Firm's Performance and Partnership Intention in the Digital Contents Service Industry
Kim, Seon-Min ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 271~279
DOI : 10.12812/ksms.2012.14.4.271
Although digital contents markets grow very rapidly and are known as a higher value added industry, there is also potential risk in producing digital contents. Thus, many firms have begun to produce a firm's digital contents by outsourcing from other companies in order to catch-up new technologies and to make stable profits. However, since contracts are decided mostly based on bidding price and also standard contract are not available, there is a limit on the benefit from the contents outsourcing. Thus, this study argues that if both contract factors such as contract concreteness and flexibility are well managed, the on-line digital contents will increase the performance of a firm. This study deals with the influence on the firm's performance by the outsourcing in contract factors based on the empirical analysis. Using regression analysis with these two dependent variables, the findings showed that the contract concreteness had positive effects on both cost improvement performance and efficiency improvement performance, but the contract feasibility only had positive effect on efficiency improvement performance. In addition, the result of the study showed that the contract performance of outsourcing the digital contents have a positive impact on the partnership intention.
A Study on Ambidextrous Attribute About Problem Solving Tools
Sung, Ki-Wook ; Han, Hoon-Seok ; Kim, Bong-Sun ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 281~289
DOI : 10.12812/ksms.2012.14.4.281
Recently, creative innovation has become a major topic in management innovation and due to this, various researches on its need and methodologies are being performed. According to previous studies on ambidexterity, explorative innovation is closer to divergent and right-sided brain, while exploitative innovation is closer to convergent and left-sided brain. Five attributes of the questionnaires were developed based on right-sided and left-sided brain theory. Also, 25 problem solving tools were selected according to previous studies. QC 7 Tools and new QC 7 Tools were frequently used in Six Sigma projects. Other 11 problem solving tools were selected with consideration on its usage frequency. Survey questionnaires were distributed to 25 Six Sigma consultants and 22 were retrieved for this study's use. As a result, 14 tools were identified to hold exploitative attribute while 11 tools were identified to hold explorative attributes.
A Study on the Effects of Single PPM on Management Performance in Small-Medium Manufacturing Industry
Yoon, Ji-Eun ; Kim, Young-Bum ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 291~301
DOI : 10.12812/ksms.2012.14.4.291
Quality management activities are an important factor that they could be regarded as a most significant drive to prompt growth of a corporation. From this research as core strategy of the enterprise single ppm wants to emphasize the importance of the quality management activity. The Empirical results are summarized as follows, for successful Single PPM, leadership and corporate culture should be based on. As Single PPM activities factor, Customer Management significantly affects Single PPM Performance. Therefore, to the success of quality management activities, internal corporate leadership and corporate culture must be formed. And for customer management, should take advantage of a variety of the company's internal and external information strategically.
A Study on Suggestions for Progress of SW Industry in company with Regional Economy
Kim, Dong-Min ; Jang, Jung-Hwan ; Lee, Doo-Yong ; Zhang, Jing-Lun ; Jho, Yong-Chul ; Kim, Jeong-Hwan ; Lee, Chang-Ho ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 303~311
DOI : 10.12812/ksms.2012.14.4.303
Recently SW is the key industry which leads the HW industry and service industry, but market size of SW is only 0.9% of GDP. It is necessary systematic and strategic support to create new SW market through SW convergence and to secure the global competitiveness. This paper deals with some strategic suggestions for progress of SW industry in company with regional economy. We survey and analyze the many SW support projects by government and take professional advice from some specialists of regional information industry promotion agency. We draw 10 strategic suggestions for support of SW industry. Also we analyze the relative importance of 10 strategic suggestions by AHP analysis.
A Study on Economic Effect of SW Industry through Reconstruction of Industry Classification
Jang, Jung-Hwan ; Lee, Doo-Yong ; Zhang, Jing-Lun ; Jho, Yong-Chul ; Lee, Choon-Seop ; Im, Dong-Gi ; Lee, Chang-Ho ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 313~319
DOI : 10.12812/ksms.2012.14.4.313
SW industry is important at entire industry in Korea and also one of new growth engine industry. This paper deals with the economic effect of SW industry through input-output analysis. We reconstruct the SW industry by extracting and combining SW portion from other industries of the inter-industry relation table. We obtain that production inducement coefficients, value added inducement coefficients, employment inducement coefficients, and job position inducement coefficients are higher than average inducement coefficients of all industries.
A Study of the improvement to National Technology Qualification System activation scheme for HRD on the Ministry of National Defense
Kim, Woo-Hyun ; Lee, Won-Park ; Jeong, Byung-Han ; Park, Jae-Hyun ; Jung, Young-Deak ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 321~332
DOI : 10.12812/ksms.2012.14.4.321
The special organization that our military service is conscripted by the duty of national defense purposes to the period of military service. So couple of soldiers are think as the corresponds to college, or some knowledge layer from the operating management discarding period, lifetime value. But, now a day changed of the military life, it is when the individual soldiers can have some self-development and the lifelong education in terms of a period, and can changeing the footsteps of the new life that the function as a 'bridge' to activate production of barracks life. So that it can be supported themselves need to strive for human resource development. This study is being discussed on the correlation of military human resources and qualified operating and sustainable and promising future eligibility for qualified by taking advantage of the Boston Consulting Group Matrix(Boston Consulting Group Matrix).
The effect of corporate entrepreneurship on managerial innovation, and the moderating effect of shared vision
Ahn, Kwan-Young ;
Journal of the Korea Safety Management and Science, volume 14, issue 4, 2012, Pages 333~339
DOI : 10.12812/ksms.2012.14.4.333
This paper reviewed the relationship between corporate entrepreneurship(innovativeness, risktaking, proactiveness) and managerial innovation(organization innovation, human resource innovation), and the moderating effect of shared vision. The data to verify proposed hypothesis consist of the responses from 243 employees in Kyeong-Gi and Kang-Won province. The results of hierarchical multiple regression analysis showed that innovativeness and proactiveness are related positively with organization innovation and human resource innovation, but risktaking is not related with innovation. Although risktaking has not effect on human resource innovation, it is appeared that it will be positively related with human resource innovation while shared vision is high.