Go to the main menu
Skip to content
Go to bottom
REFERENCE LINKING PLATFORM OF KOREA S&T JOURNALS
> Journal Vol & Issue
Transactions of the Korean Society for Noise and Vibration Engineering
Journal Basic Information
Journal DOI :
The Korean Society for Noise and Vibration Engineering
Editor in Chief :
Volume & Issues
Volume 13, Issue 12 - Dec 2003
Volume 13, Issue 11 - Nov 2003
Volume 13, Issue 10 - Oct 2003
Volume 13, Issue 9 - Sep 2003
Volume 13, Issue 8 - Aug 2003
Volume 13, Issue 7 - Jul 2003
Volume 13, Issue 6 - Jun 2003
Volume 13, Issue 5 - May 2003
Volume 13, Issue 4 - Apr 2003
Volume 13, Issue 3 - Mar 2003
Volume 13, Issue 2 - Feb 2003
Volume 13, Issue 1 - Jan 2003
Selecting the target year
Robust Design of Pantograph Panhead Sections Considering Aerodynamic Stability and Noise
Transactions of the Korean Society for Noise and Vibration Engineering, volume 13, issue 2, 2003, Pages 83~91
DOI : 10.5050/KSNVN.2003.13.2.083
Pantograph design Process must be considered in terms of stability of aerodynamics and reduction of aeroacoustics. Furthermore pantograph needs to be insensible to severe circumstance condition like typhoon, tunnel, a change of season. In this paper, robust design of panhead sections is conducted based on the Taguchi's design of experiment method. In the aeroacoustic noise analysis, an acoustic analogy using the Ffowcs Williams and Hawkings(FW-H) equation is used to calculate the flow induced sound pressure level in aeroacoustics. From the near-field CFD analysis data, the far-field noise is predicted at the positions of 25 m away from Pantograph. Based on aerodynamic(CFD) and aeroacoustic(FW-H) analysis data, the optimal sizing and Positioning of panhead elements are determined using robust design optimization method. Design parameters such as thickness, length and radius are controllable factors, while outdoor air temperature and atmospheric pressure are considered as uncontrollable factors in the context of Taguchi's approach. A number of CFD simulation and aeroacoustic analysis are performed based on orthogonal arrays. In this paper, two-step optimization method is used as a parameter design procedure. It is executed using signal to noise(S/N) ratio and analysis of means(ANOM) method. So Thus, an optimal level of design parameters Is extracted to minimize the disconnection ration between contact strips and catenary system, and reduce the far-field aeroacoustic noise.
Dynamic Analysis of Toning-fork Gyroscope
Transactions of the Korean Society for Noise and Vibration Engineering, volume 13, issue 2, 2003, Pages 92~98
DOI : 10.5050/KSNVN.2003.13.2.092
A rate gyroscope has been used popularly to measure the angular motion of a given vehicle using a symmetric rotor spinning rapidly about its symmetry axis. Since the rapid rotation is required in this type of gyroscope, the motor has been used to make the rotor spin, so that it results in a heavy configuration. The toning-fork gyroscope has been developed to avoid this problem, which utilizes a Coriolis coupling term and vibration about one axis. Due to the Coriolis effect, the vibration of one axis is transferred to other axis when the angular motion along the vibrating axis is given to the system. The concept of a tuning-fork gyroscope was recently realized using MEMS techniques. However, the dynamic characteristics of the tuning-fork gyroscope has not been discussed in detail. In this study. we derived the equations of motion for the tuning-fork type gyroscope using the energy approach and investigated the dynamic characteristics by means of numerical analysis.
Forced Vibration Analysis of Plate Structures Using Finite Element-Transfer Stiffness Coefficient Method
Transactions of the Korean Society for Noise and Vibration Engineering, volume 13, issue 2, 2003, Pages 99~107
DOI : 10.5050/KSNVN.2003.13.2.099
The finite element method(FEM) is the most widely used and powerful method for structural analysis. In general, in order to analyze complex and large structures, we have used the FEM. However, it is necessary to use a large amount of computer memory and computation time for solving accurately by the FEM the dynamic problem of a system with many degree-of-freedom, because the FEM has to deal with very large matrices in this case. Therefore, it was very difficult to analyze the vibration for plate structures with a large number of degrees of freedom by the FEM on a personal computer. For overcoming this disadvantage of the FEM without the loss of the accuracy, the finite element-transfer stiffness coefficient method(FE-TSCM) was developed. The concept of the FE-TSCM is based on the combination of modeling technique in the FEM and the transfer technique in the transfer stiffness coefficient method(TSCM). The merit of the FE-TSCM is to take the advantages of both methods, that is, the convenience of the modeling in the FEM and the computation efficiency of the TSCM. In this paper, the forced vibration analysis algorithm of plate structures is formulated by the FE-TSCM. In order to illustrate the accuracy and the efficiency of the FE-TSCM, results of frequency response analysis for a rectangular plate, which was adopted as a computational model, were compared with those by the modal analysis method and the direct analysis method which are based on the FEM.
A Study on Influence of High Pressure Hose on Automotive Power Steering Interior Noise Using Frequency Analysis
Transactions of the Korean Society for Noise and Vibration Engineering, volume 13, issue 2, 2003, Pages 108~115
DOI : 10.5050/KSNVN.2003.13.2.108
High pressure hose having tuning cables, called Resonator hose is frequently used to attenuate pressure ripple generated by the pump for reducing the vehicle interior noise. A number of studios have been conducted on the resonator hose and its analytical models. However, there are few studies which deal with the influence of resonator hose on vehicle interior noise because the most of studies were focused on transmission loss of the resonator hose. This paper presents NVH test results of power steering system and frequency analysis results. In the frequency analysis, both the relations between vibration, pressure ripple and vehicle interior noise and also the design parameters of high pressure hose influencing on vehicle Interior noise were discussed. The test was done for various high pressure hose specimens in full turn condition.
On the Modeling and Simulation of Friction for an Automotive Clutch
Transactions of the Korean Society for Noise and Vibration Engineering, volume 13, issue 2, 2003, Pages 116~125
DOI : 10.5050/KSNVN.2003.13.2.116
Four models for stick-slip friction are presented and are adopted for a numerical simulation study for a manual transmission clutch damper in idle mode. Meaning of parameters for friction models are explained and proper values are suggested. Also explained ate the reason why those specific values for the parameters are chosen. Preferable model for the clutch damper In Idle mode is discussed in terms of calculation efficiency and fidelity of the model based on real measured data. For clutch damper idle mode simulation studies, all four models perform equally well.
An Experimental Analysis of the Contributions to the Radiated Noise due to Panel Vibration of a Rotational Machine
Transactions of the Korean Society for Noise and Vibration Engineering, volume 13, issue 2, 2003, Pages 126~131
DOI : 10.5050/KSNVN.2003.13.2.126
This study is concerned with the reduction of noise radiation by an industrial fan unit. First, spectral decomposition method is used to decompose the spectrogram obtained in experiments into source function and noise transfer function, and then major noise generation sources are investigated. Among the noise sources involved in the fan unit. this article is focused on the noise source due to vibration of panels of the unit housing. It is shown here that noise radiation associated with the panel vibration can be as significant in some frequency ranges as that associated with other noise sources such as aeroacoustic fan noise.
Testing for Identification of Dynamic Properties of Viscoelastic Material Subject to Large Static Deformation
Transactions of the Korean Society for Noise and Vibration Engineering, volume 13, issue 2, 2003, Pages 132~143
DOI : 10.5050/KSNVN.2003.13.2.132
Viscoelastic components for vibration isolation or shock absorption in automobiles, machines and buildings are often subject to a high level of static deformation. From the dynamic design point of view, it is requisite to predict dynamic complex stiffness of viscoelastic components accurately and efficiently. To this end, a systematic procedure for complex modulus measurement of the viscoelastic material under large static deformation is often required in the industrial fields. In this paper, dynamic test conditions and procedures for the viscoelastic material under small oscillatory load superimposed on large static deformation are discussed. Various standard test methods are investigated in order to select an adequate test methodology. The influence of fixed boundary condition in the compression tests upon complex stiffness are investigated and an effective correction technique is proposed. Then the uniaxial tension and compression tests are performed and its results are compared with analysis results from conventional constitutive models.
Multidisciplinary Design of Floor Plates with Holes Through Finite Element Method
Transactions of the Korean Society for Noise and Vibration Engineering, volume 13, issue 2, 2003, Pages 144~150
DOI : 10.5050/KSNVN.2003.13.2.144
Pleasantness or quietness becomes one of the most important factors for residential and office building designs recently. Especially for apartments, the noise generated by falling objects becomes a sensitive issue these days. To overcome the problem of the impact noise in apartments, the floor design has been changed. To reduce the transmissibility of the noise. composite floor structures ate devised and implemented for the construction of apartments. In this paper. the noise reduction) performance of a composite floor plate with holes is analyzed. Computational models for the structures are developed and its Performance is evaluated by using the finite element method. The results show that the noise can be significantly reduced with the multi-layer composite floor plates with holes.