Go to the main menu
Skip to content
Go to bottom
REFERENCE LINKING PLATFORM OF KOREA S&T JOURNALS
> Journal Vol & Issue
Ocean Systems Engineering
Journal Basic Information
Journal DOI :
Editor in Chief :
Young S. Shin / Pal G. Bergan / Moo-Hyun Kim
Volume & Issues
Volume 3, Issue 4 - Dec 2013
Volume 3, Issue 3 - Sep 2013
Volume 3, Issue 2 - Jun 2013
Volume 3, Issue 1 - Mar 2013
Selecting the target year
Analysis of a cracked bar under a tensile load in a corrosive environment
Miglis, Yohann ; Elishakoff, Isaac ; Presuel-Moreno, Francisco ;
Ocean Systems Engineering, volume 3, issue 1, 2013, Pages 1~8
DOI : 10.12989/ose.2013.3.1.001
This brief study aims at providing a model to predict the time of service of a cracked bar in corrosive environment, in view of both the fracture mechanics and elastic failure criteria. Dolinskii`s assumption on the relationship between stress and the corrosion rate is adopted. It is superimposed with fracture mechanics consideration. A comparison between the time of service of a cracked bar and that of a uniform bar is provided.
A scientific approach to estimate the safe depth of burial of submarine pipelines against wave forces for different marine soil conditions
Neelamani, S. ; Al-Banaa, K. ;
Ocean Systems Engineering, volume 3, issue 1, 2013, Pages 9~34
DOI : 10.12989/ose.2013.3.1.009
Submarine pipelines encounter significant wave forces in shallow coastal waters due to the action of waves. In order to reduce such forces (also to protect the pipe against anchors and dropped objects) they are buried below the seabed. The wave force variation due to burial depends on the engineering characteristics of the sub soil like hydraulic conductivity and porosity, apart from the design environmental conditions. For a given wave condition, in certain type of soil, the wave force can reduce drastically with increased burial and in certain other type of soil, it may not. It is hence essential to understand how the wave forces vary in soils of different hydraulic conductivity. Based on physical model study, the wave forces on the buried pipeline model is assessed for a wide range of wave conditions, for different burial depths and for four types of cohesion-less soils, covering hydraulic conductivity in the range of 0.286 to 1.84 mm/s. It is found that for all the four soil types, the horizontal wave force reduces with increase in depth of burial, whereas the vertical force is high for half buried condition. Among the soils, well graded one is better for half buried case, since the least vertical force is experienced for this situation. It is found that uniformly graded and low hydraulic conductivity soil attracts the maximum vertical force for half buried case. A case study analysis is carried out and is reported. The results of this study are useful for submarine buried pipeline design.
Analytical study on hydrodynamic motions and structural behaviors of hybrid floating structure
Jeong, Youn-Ju ; Lee, Du-Ho ; Park, Min-Su ; You, Young-Jun ;
Ocean Systems Engineering, volume 3, issue 1, 2013, Pages 35~53
DOI : 10.12989/ose.2013.3.1.035
In this study, a hybrid floating structure with cylinder was introduced to reduce the hydrodynamic motions of the pontoon type. The hybrid floating structure is composed of cylinders and semi-opened side sections to penetrate the wave impact energy. In order to exactly investigate the hydrodynamic motions and structural behavior of the hybrid floating structure under the wave loadings, integrated analysis of hydrodynamic and structural behavior were carried out on the hybrid floating structure. Firstly, the hydrodynamic analyses were performed on the hybrid and pontoon models. Then, the wave-induced hydrodynamic pressures resulting from hydrodynamic analysis were directly mapped to the structural analysis model. And, finally, the structural analyses were carried out on the hybrid and pontoon models. As a result of this study, it was learned that the hybrid model of this study was showed to have more favorable hydrodynamic motions than the pontoon model. The surge motion was indicated even smaller motion at all over wave periods from 4.0 to 10.0 sec, and the heave and pitch motions indicated smaller motions beyond its wave period of 6.5 sec. However, the hybrid model was shown more unfavorable structural behavior than the pontoon model. High concentrated stress occurred at the bottom slab of the bow and stern part where the cylinder wall was connected to the bottom slab. Also, the hybrid model behaved with the elastic body motion due to weak stiffness of floating body and caused a large stress variation at the pure slab section between the cylinder walls. Hence, in order to overcome these problems, some alternatives which could be easily obtained from the simple modification of structural details were proposed.
Hydrodynamic performance of a composite breakwater with an upper horizontal porous plate and a lower rubble mound
Liu, Yong ; Li, Hua-Jun ;
Ocean Systems Engineering, volume 3, issue 1, 2013, Pages 55~70
DOI : 10.12989/ose.2013.3.1.055
A composite breakwater with an upper horizontal porous plate and a lower rubble mound is proposed and studied in this work. By means of matched eigenfunction expansions, a semi-analytical solution is developed for analyzing the hydrodynamic performance of the breakwater. The semi-analytical solution is verified by known solutions for special cases and an independently developed multi-domain boundary element method solution. Numerical examples are given to examine the reflection, transmission and energy loss coefficients of the breakwater and the wave force acting on the horizontal porous plate. Some useful results are presented for engineering applications.
Acoustic theory application in ultra short baseline system for tracking AUV
Ji, Daxiong ; Liu, Jian ; Zheng, Rong ;
Ocean Systems Engineering, volume 3, issue 1, 2013, Pages 71~77
DOI : 10.12989/ose.2013.3.1.071
The effective tracking area of ultra short baseline (USBL) systems strongly relates to the safety of autonomous underwater vehicles (AUVs). This problem has not been studied previously. A method for determining the effective tracking area using acoustic theory is proposed. Ray acoustic equations are used to draw rays which ascertain the effective space. The sonar equation is established in order to discover the available range of the USBL system and the background noise level using sonar characteristics. The available range defines a hemisphere like enclosure. The overlap of the effective space with the hemisphere is the effective area for USBL systems tracking AUVs. Lake and sea trials show the proposed method`s validity.