• Title, Summary, Keyword: 내치차

Search Result 8, Processing Time 0.033 seconds

A Study on Tooth Profile Error in Internal Gear Shaping (내치차 절삭시의 치형오차에 관한 연구)

  • 박천경;최영석
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.15 no.1
    • /
    • pp.154-162
    • /
    • 1991
  • In this study, the simulation program is developed where the tooth profile error in internal gear shaping is calculated considering several factors which affect it. This factors are the circular feed of the pinion cutter, the interference by the geometric conditions of the cutter and the internal gear, the deviation from the theoretical involute profile of the cutter and the eccentricity of the cutter and the internal gear. With this program, the effects are investigated which the geometric conditions and the cutting conditions in internal gear shaping have on the tooth profile error of the internal gear. The condition for the minimization of it is derived and then the results of simulation are adequately verified by measurements of internal gears cut by a pinion cutter.

Design and Analysis of Gerotor with Generalized Shapes for Power-Steering Units (파워 스티어링 유닛용 일반형상 제로터의 설계 및 해석)

  • Jeong, Jae-Tack;Shin, Soo-Sik;Kim, Kap-Tae
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.34 no.7
    • /
    • pp.891-896
    • /
    • 2010
  • A gerotor is used in power-steering units (PSUs) as well as in hydraulic motors or pumps. The inner rotor is developed on the basis of the shape of the outer rotor tooth, which normally has one arc. The method of generating inner rotor on the basis of a generalized shape of outer rotor is analyzed with a view to improve PSU characteristics. An arc-shaped outer rotor with two curvatures was used in the analysis; design parameters such as the shape and curvature of the inner rotor, the flow rate of the gerotor, the position of contact point, and slip velocity are calculated, and these results are shown. This analysis enables us to develop a new design of compact PSUs.

Geometrical study of the tooth fillet of the automotive transmission gear (자동차 변속기용 치차의 fillet부분에 대한 기하학적 고찰)

  • 서용권
    • Journal of the korean Society of Automotive Engineers
    • /
    • v.3 no.1
    • /
    • pp.27-31
    • /
    • 1981
  • 대량생산체제로 제작되는 자동차용 변속기는 일단 양산에 돌입하고부터는 막대한 retooling비 용의 지불없이는 좀처럼 그 모양이나 중요설계치수가 변경될 수 없기 때문에, 초기설계단계에 서의 다양하고 신중한 고려가 그 후의 어느 단계보다 중요하다. 자동차용 변속기의 치차설계자는 치차상의 주어진 공간내에서 가장 튼튼하고 소리없는 치차를 설계하기 위하여 모듈(module), 압력각, 치깊이 등이 표준에서 벗어나는 특수 cutter를 사용하도록 요구할 수밖에 없다(이러한 비표준 cutter의 제작을 위해서는 다소 더 많은 시간과 경비가 소요될지 모르지만, 이 문제는 양산체제의 특수성 속에 충분히 소화흡수된다). 표준치차의 경우에는 대부분의 설계 데이터가 테 이블이나 그래프로 주어져 있지만 모듈, 압력각, 치깊이 등이 표준에서 벗어나는 치차에 있어서는 이것들을 별도로 계산하지 않으면 안된다. 더욱이 세계자동차 메이커가 소형화와 경량화로 치 닫고 있는 현 추세에 있어서는 더욱 정밀한 계산에 의한 데이터가 요구될 것이다. 본 보고서는 임의의 cutter를 사용하여 절삭한 치차의 fillet 부분에 있어서 fillet 곡선의 함수를 구하고 이 것으로부터 lewis방식의 굽힘강도계산식(대부분의 굽힘강도 계산식이 lewis 이론에 입각한 것이긴 하지만)에 사용되는 강도계 수를 approach 법으로 구하는 방법과 계산공식에 대하여 서술한 것이다. 여기서 취급하는 굴절법은 hobbing cutter 등에 의한 rack형 굴절법이다.

  • PDF

A Study on the design of planocentric gear reducer used in industrial robots (로보트용 내접 유성식 감속기의 설계에 대한 연구)

  • 이성철;오박균;권오관
    • Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
    • /
    • /
    • pp.41-49
    • /
    • 1987
  • 관절 로보트를 위시한 각종 매니퓨레이터 장치의 관절 구동부는 모터와 감속기의 조합으로 구성되어 있다. 최근에는 감속기를 내재하지 않는, 직접구동 방식이 연구중이지만 모터는 고속회전율 시키는 것이 동력밀도가 크기 때문에 대부분 감속기를 사용하여 회전속도를 감속하고 토오크를 증대하여 매니퓨레이터를 구동시키고 있다. 본 연구에서는 내접 유성식 감속기의 국산화를 도모하기 위하여 원통형 핀을 내치차 치형으로 사용한 내접 유성식 감속기의 설계 기술을 개발하였다. 치형 수정계수를 도입하여 수정계수 변화에 대한 치형의 변화와 접촉 하중 및 응력의 변화를 검토하고 로오크 전달시 기구에 작용되는 하중을 해석하여 내접 유성식 감속기의 설계 기법을 제시하였다.

  • PDF

CAD Optimisation of The Planocentric Gears From EHL(elasto-hydrodynamic lubrication) Concept (EHL 개념을 도입한 PLANOCENTRIC GEATS 장치의 설계 최적화)

  • 권오관;이성철;김이범
    • Tribology and Lubricants
    • /
    • v.1 no.1
    • /
    • pp.69-79
    • /
    • 1985
  • EHD(elastohydrodynamic) lubrication theories are applied to analyse the contact characteristies between the circular are profiled teeth of the plano-wheel gear and the cylindrical pin type teeth of the inner gear for the planocentric gears unit, For improving lubrication characteristic and contact frictional interference between the teeth, a new design method of optimising continuous meshing position is introduced, and the new tooth profile which is modified as a rounded curvature of the edge of circular arc is also suggested. The results of mathematical computation from conventional and the modified gear unit are compared, respectively.

Design and Meshing Analysis of a Non-involute Internal Gear for Counters (계수기용 비인벌류트 치형의 내치차 설계와 물림해석)

  • Lee, Sung-Chul
    • Tribology and Lubricants
    • /
    • v.30 no.4
    • /
    • pp.212-217
    • /
    • 2014
  • A counter gear transmits the rotation angle, so the angular velocity ratio of the gear does not necessarily need to be constant in the meshing process. As a pinion has a small number of teeth when combined with an internal gear for counters, tooth interference can occur with the use of an involute curve. This paper introduces circular arcs that represent a tooth profile and fillet for the profile design of a pinion through the combination of arcs with lines. The straight line of a rack tooth represents the profile of a mating internal gear. Thus, the circular arc and line maintain contact during the rotation of the counter gear. This paper presents an analysis of the meshing of the circular arc tooth and rack tooth along with the properties of the counter gear, such as the change in rotational velocity and amount of backlash. The contact ratio of the counter gear is 1 because the tooth contact occurs between circular arcs and line. The initial position of tooth contact, which denotes the simultaneous contact of two teeth, is found. As the rotation of the pinion, only one tooth keeps the contact situation. This meshing property is analyzed by the geometrical constraints of the tooth profile in contact and the results are presented as graphical diagrams in which tooth-arc movements are superimposed.

Development of the Decelerator for Briquetting Machine with Low Vibration (저진동 슬래그 분쇄장치용 감속기 개발)

  • Lee, Hyoung Woo;Hur, Nam Soo;Kim, In Hwan
    • Journal of the Korean Society of Marine Engineering
    • /
    • v.36 no.8
    • /
    • pp.1043-1049
    • /
    • 2012
  • In order to develop the decelerator for briquetting machine which composed of multi-staged gears, shafts and bearings, static design of the decelerator has been carried out through the analysis of bending and face forces, including structural analysis, applied on those teeth in accordance with AGMA(American Gear Manufacturers Association) standard. And also, dynamic design has been carried out with considering of vibratory forces caused by unbalance mass and transmitting error of gear. On the results of vibration analysis, it has been confirmed that there is not any critical speed within its operating range.