• 제목, 요약, 키워드: Displacement

검색결과 11,408건 처리시간 0.057초

강제변위법을 이용한 굴착배면지반의 변형해석(II) - 수치해석 및 적용성 - (Deformation Analysis of Excavated Behind Ground by The Artificial Displacement Method (II) - Numerical Analysis and Application -)

  • 윤중만
    • 한국지반신소재학회논문집
    • /
    • v.7 no.3
    • /
    • pp.31-40
    • /
    • 2008
  • 탄소성구성방정식을 적용한 유한요소법을 이용하여 흙막이벽의 변형형상에 따른 배면지반의 변형거동을 예측하였다. 굴착배면 지반의 변형형상은 흙막이벽 부근에서는 흙막이벽 변형형상과 유사하게 나타나지만 흙막이벽으로부터 멀어질수록 켄틸레버 형상으로 변한다. 그리고 흙막이벽의 상부변형을 억제시키면 배면지반의 변형(침하량, 측방이동량)을 감소시킬 수 있다. 또한, 굴착에 따른 흙막이벽의 변형형상은 굴착배면지반의 소성파괴영역 및 안전율 저하영역에 영향을 미치는 것으로 나타났다.

  • PDF

젯팅 디스펜서 변위확대장치의 응답지연 개선 연구 (Improvement for Response Delays of Displacement Magnifier in Jetting Dispenser)

  • 하명우;이광희;홍승민;이철희
    • 한국소음진동공학회논문집
    • /
    • v.26 no.5
    • /
    • pp.546-551
    • /
    • 2016
  • The objective of this study is to investigate the response delays between piezo-stack actuator and the displacement magnifier of jetting dispenser and to reduce its falling time in terms of displacement optimization. The dispenser is driven by the dual piezo-stack actuators with a hinge lever mechanism to precisely control flow rate of the working fluid (3000 cP). It is commonly found that piezo actuator-driven jetting dispensers involving viscous working fluids have displacement optimization problem for ideal performance. The response delay of the system is caused by the phenomenon that the displacement magnifier cannot exactly follow the motion of the piezo actuators. The response delay may lower the performance of the system due to the inaccurate discharge of working fluid or even damages to the system itself due to inharmonious motion of piezo actuators with lever system. To reduce its response delay, a new displacement profile obtained from displacement optimization is suggested; its performance is tested through finite element analysis; and experiments are carried out to verify the performance of the obtained displacement profile.

고층 스카이브리지의 변위 허용치 산정에 대한 연구 (Study on Evaluating Displacement Tolerance of Sky-bridge in Tall Buildings)

  • 김윤곤
    • 대한건축학회논문집:구조계
    • /
    • v.36 no.4
    • /
    • pp.135-142
    • /
    • 2020
  • The new method for evaluating the displacement tolerance of sky-bridges with pin-roller type supports was proposed considering both return period of phase difference between connected buildings and geometrical characteristics of skybridge. Because displacement tolerance is relative value, which is most affected by the phase difference of the connected buildings, the dynamic response of these building with time history analysis should be evaluated. However, the initial phase could not be specified, so the result of displacement tolerance would be varied with respect to initial value. Thus, the tolerance can be reasonably evaluated SRSS calculation with design displacements based on statistical approach and of each building. In addition, the geometrical characteristics of sky-bridge should be considered because the transverse displacement of sky-bridge span causes the shear deformation of the bridge and longitudinal displacement tolerance cannot release the shear deformation. Therefore, the some pin-end support in sky-bridge should have longitudinal displacement tolerance to accommodate the shear deformation. By resolving this shear deformation, it is possible not only to accommodate transverse displacement, but also to avoid the complicated joint details such as both pot bearing and guided supports with shear key.

다중화된 광 손실형 광섬유 센서에 의한 변위의 측정 (Displacement Measurement by Multiplexed Optical Loss -based Fiber Optic Sensor)

  • 권일범;김치엽;유정애
    • 한국전산구조공학회:학술대회논문집
    • /
    • /
    • pp.556-565
    • /
    • 2003
  • Light losses in optical fibers are investigated by a fiber optic OTDR (Optical Time Domain Reflectometry) sensor system to develop fiber optic probes for structural displacement measurement. The displacement sensitivity was determined by the measurements of fiber-bending loss according to the gage length changes of the displacement sensor. The fiber optic displacement probe was manufactured to verify the feasibility of the structural displacement measurement.

  • PDF

중심위에서 중심교합으로 전위될 때의 과두의 변위에 관한 방사선학적 연구 (A RADIOGRAPHIC STUDY ON THE CONDYLAR DISPLACEMENT FROM CENTRIC RELATION TO CENTRIC OCCLUSION)

  • 이인석;안형규
    • 치과방사선
    • /
    • v.12 no.1
    • /
    • pp.15-20
    • /
    • 1982
  • The purpose of this study was to investigate the normal range of condylar displacement of normal adults. The author has observed two roentgenographic images of condylar head taken by transcranial projection. Two roentgenographic images are centric occlusion and centric relation. The results were obtained as follow: 1. Total subjects are 72 condyles. The condylar displacement from centric relation to centric occlusion was shown in 65 condyles (90%) anteriorly. 59 condyles (82%) inferiorly. Two condyles (3%) showed neither anterior displacement nor inferior displacement. 2. The average displacement of right condyles was 0.54±0.06㎜ anteriorly, 0.34±0.05㎜ inferiorly. The average displacement of left condyles was 0.74±0.09㎜ anteriorly, 0.45±0.05㎜ inferiorly. 3. The subjects of synmetrical displacement are 7 cases (20%) anteriorly, 2 cases (6%) inferiorly.

  • PDF

유한요소해석 프로그램에 의한 리니어 초음파 모터의 변위량 해석 (Analysis of Linear-type Ultrasonic Motor Using A Finite Element Method)

  • 이동준;임태빈;강성택;김영욱;임기조
    • 한국전기전자재료학회:학술대회논문집
    • /
    • /
    • pp.33-36
    • /
    • 1998
  • This paper is a study on a linear ultrasonic motor with a first longitudinal$(L_1)$ and fourth bending $(B_4)$ double-mode rectangular plate. The stator vibrator is composed of an elastic material plate and of a piezo-ceramic element having a motion by electrical excitation. Each strain vector differs by $90^{\circ}$ generate travelling wave with the elliptical displacement motion of a point on the surface. To magnify displacement of longitudinal direction in elliptical displacement motion, the motor has a mechanism of the.displacement enlargement. In this paper, the vibration shape of the stator is simulated using the finite element method. A detailed model considered of the piezoelectric effect and of the exact geometry of the stator is used to calculate the displacement. The position of displacement mechanism is decided by the maximum displacement.

  • PDF

교량구조물의 측방이동 측정방법에 관한 연구 (The Measurement Method of Lateral Displacement in Bridge Abutment.)

  • 장용채
    • 한국항만학회지
    • /
    • v.14 no.1
    • /
    • pp.115-124
    • /
    • 2000
  • This study is a suggest a measurement method of lateral displacement, which can be used to judge the stability of bridge abutment on soil undergoing lateral movement. The abutment of bridge on soft foundation makes lateral movement due to the settlement of back fill and lateral flow. To measure the displacement of such a abutment, there are a lot of indirect method for measurement such as survey of leveling or inclinometer gauge around the abutment. But all of them are not sufficient to confirm the ground behavior and measure the exact lateral behavior of structure. As making the structure and pile cooperatively by measuring the movement of lateral displacement, for measuring the abutment displacement precisely by using the inclinometer. In this work, we try to suggest efficient measuring method of abutment displacement and its application.

  • PDF

캠 기구의 시뮬레이션을 이용한 더블캠 방식 바디침 기구의 캠 설계를 위한 변위선도함수 선정에 관한 연구 (A Study on the Selection Displacement Curve Function for Cam Design of Double Cam Type Beating Mechanism Based on Cam Mechanism Simulation)

  • 김종수;윤호업
    • 한국섬유공학회지
    • /
    • v.39 no.6
    • /
    • pp.790-803
    • /
    • 2002
  • A beating motion is one of the main motions of the rapier loom. The beating motion locates yarn to a desired position after weft insertion motion. There are two kinds of mechanism for beating motion. One is crank lever type and the other is double cam type. Crank lever type usually used low speed rapier loom. In other hand double cam type used high speed rapier loom. Cam part in double cam type beating mechanism is very important. Cam design starts at displacement curve design. This study investigated four different displacement curves selected from various kinds of displacement curve functions. Thus this paper proposed how to select optimized displacement curve function for double cam type beating mechanism of high speed rapier loom using cam simulation. And then, presents the comparable data of pressure angle, cam contact force and driving torque per each of displacement curve to determine the optimized displacement curve function.

홀로그래피 간섭계를 이용한 미소변위 측정 (Small Displacement Measurement by Holographic Interferometry)

  • 이해중;황운봉;박현철
    • 대한기계학회논문집
    • /
    • v.16 no.5
    • /
    • pp.864-872
    • /
    • 1992
  • 본 연구에서는 이중노출 홀로그래피 간섭계의 원리를 이용하여 임의의 2차원 적 변형에 있어서 면외 변위와 면변위(in-plane displacement) 각각에 대한 홀로그램 을 제작하고 이를 컴퓨터에 입력하여 간섭무늬를 해석함으로써 변위와 변형률의 정량 화를 시도하였다.

제로터 유압 모터의 용량에 관한 연구 (An Analysis on Volumetric Displacement of Hydraulic Gerotor Motor)

  • 김대명;함영복;김성동
    • 유공압시스템학회:학술대회논문집
    • /
    • /
    • pp.39-43
    • /
    • 2010
  • It is hard and complex to analytically derive a volumetric displacement formula of a gerotor hydraulic motor because geometric shape of its rotors is complicate. An analytical method about the volumetric displacement is proposed in this work, which is relatively easy and based upon two physical concepts. The first one is energy conservation between hydraulic input energy of the motor and mechanical output energy. The second concept is torque equilibrium with respect to inner and outer rotors. The proposed formula about the volumetric displacement is verified by comparing an analytical displacement and a numerical displacement for an example specification of the motor. The numerical displacement is calculated through a kind of CAD technology. The analytical formula can be utilized in analysis and design of hydraulic gerotor motors.

  • PDF