• Title, Summary, Keyword: LCR meter

Search Result 71, Processing Time 0.035 seconds

Frequency Characteristics of the Air Dielectric Standard Capacitors having 4-terminal-Pair connector Type (4-Terminal-Pair 형 공기유전체 전기용량표준기의 주파수 특성)

  • Kim, Han-Jun;Lee, Rae-Duk;Kang, Jeon-Hong;Han, Sang-Ok
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • /
    • pp.1214-1217
    • /
    • 2004
  • 현재 전기용량의 국가표준은 1 kHz, 1592 Hz에서만 유지 및 보급이 되고 있다. 그러나 전기용량 및 임피던스를 측정하는 브리지와 LCR meter들은 비교적 넓은 주파수 범위에서 측정이 가능하도록 생산이 되고 있다. 따라서 이러한 기기들의 교정은 실제적으로 사용되고 있는 주파수 전 영역이 아닌 1 kHz 만 되고 있어서 완전한 교정이라고 할 수 없다. 본 논문에서는 이를 해결하기위하여 임피던스 analyzer의 one-port 측정기술을 사용하여 4-terminal-pair(이하 4TP) 전기용량 표준기 각각의 terminal에서 임피던스를 필요 주파수에서 측정하고, 측정된 임피던스 matrix를 이용하여 4TP의 transfer 어드미턴스와 출력임피던스를 계산 하였다.

  • PDF

Implementation of Capacitance Measurement Equipment for Fault Diagnosis of Multi-channel Ultrasonic Probe (다중채널 초음파 프로브 고장진단을 위한 커패시턴스 측정 장치 구현)

  • Kang, Bub-Joo;Kim, Yang-soo
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.20 no.1
    • /
    • pp.175-184
    • /
    • 2016
  • In this paper, we propose the method to measure the capacitances using not LCR meter but capacitance to voltage(C/V) conversion. And we design the analog MUX circuits that convert 192 channels to 6 MUX channels in order to implement the diagnosis of multi-channel ultrasonic probe. This paper derives the conversion function that converts the digital voltage of each MUX channel to the capacitance using the least squares method because the circuit characteristics that convert the voltage of each MUX channel to the capacitance are different. The developed prototype illustrates the performance test results that the measure times are measured by within 4sec and the measure error rates of maximum, minimum, and average values are within 5% in terms of the repeated measurements of all 192 channels.

Influence of Adaptor on the Calibration of Inductance Standards

  • Kassim, Dewi Mohd;Kim, Dan Bee;Kim, Wan-Seop
    • Journal of Electrical Engineering and Technology
    • /
    • v.13 no.2
    • /
    • pp.911-917
    • /
    • 2018
  • Influence of the adaptors on the calibration of $100{\mu}H$ inductance standard was studied as a function of torque, applied when tightening the standard inductor terminal with the adaptor. Two different homemade adaptors of BPO gold-plated brass (BPO-Au) and banana-copper (BN-Cu) were made for the connection between the LCR meter and the inductance standard. The measured inductance (L) of the standard inductor and the contact resistance ($R_C$) between the adaptor and the standard inductor terminal showed exponential decreases against the torque increase from $25cN{\cdot}m$ to $150cN{\cdot}m$. The measured L and the calculated equivalence series resistance ($R_S$) were dependent on the adaptor type as well as on the $R_C$. The results of the adaptor analysis imply that the BPO-Au adaptor with the lower $R_C$ is more suitable for the inductance calibration. The calculated inductance of $99.956{\mu}H$ corrected by subtraction of the adaptor inductance and the contact resistance contributions from the measured value using the BPO-Au adaptor agreed well with the certificate ($99.948{\mu}H$) of the PTB within the measurement uncertainty of $140{\mu}H/H$.

A Study on Characterization of P-N Junction Using Silicon Direct Bonding (실리콘 직접 본딩에 의한 P-N 접합의 특성에 관한 연구)

  • Jung, Won-Chae
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.30 no.10
    • /
    • pp.615-624
    • /
    • 2017
  • This study investigated the various physical and electrical effects of silicon direct bonding. Direct bonding means the joining of two wafers together without an intermediate layer. If the surfaces are flat, and made clean and smooth using HF treatment to remove the native oxide layer, they can stick together when brought into contact and form a weak bond depending on the physical forces at room temperature. An IR camera and acoustic systems were used to analyze the voids and bonding conditions in an interface layer during bonding experiments. The I-V and C-V characteristics are also reported herein. The capacitance values for a range of frequencies were measured using a LCR meter. Direct wafer bonding of silicon is a simple method to fuse two wafers together; however, it is difficult to achieve perfect bonding of the two wafers. The direct bonding technology can be used for MEMS and other applications in three-dimensional integrated circuits and special devices.

Analysis of Characteristics of Residential Distribution Line for Design of Power Line Communication Systems (전력선 통신 시스템 설계를 위한 주택배선의 선로특성 분석)

  • Hong, Ducpyo;Choi, Jaeho
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.19 no.3
    • /
    • pp.99-104
    • /
    • 2005
  • This paper describes the measurement and analysis of the basic line constants in PLC(Power Line Communication) in the residential building. An apartment is considered as one of the conventional residences to get the line constants in this paper, Agilent 4263B LCR Meter is used to measure the detailed values each area and the specific results and averaged analysis data are shown in the tables. The measured results are a little bit different from the calculated values using conventional formula due to the line arrangement, neglected factors, complex permittivity, and etc. This paper describes many kinds of lines and wiring figures of domestic construction. It can be utilized with the analyzed line characteristics in frequency domain as a planning reference of PLC.

A Study on Hetero Junction using NiCuZn Ferrite System for SoP (NiCuZn 페라이트계를 이용한 SoP의 이종접합에 관한연구)

  • Kim, Nam-Hyeon;Kim, Gyeong-Nam
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • /
    • pp.256-256
    • /
    • 2012
  • SoP용 재료에 응용하기 위하여 NiCuZn 페라이트계 이용한 이종접합의 관한연구를 하였다. NiCuZn 페라이트계와 유전체의 이종접합특성은 XRD, Dilatometer, LCR meter, FE-SEM, EDS 이용하여 물리 화학적 특성을 조사하였다. NiCuZn 페라이트계는 일반적인 세라믹 제조공정을 이용하여 분말을 제조하였으며, 이종접합은 모든 시편에서 잘 진행되었으며 일부 유전체의 이온들이 페라이트 쪽으로 확산이 진행되었으며 NCZF700계는 $900^{\circ}C$ 소결 시편에서 확산이 진행되지 않은 현상이 나타났다.

  • PDF

The Analysis of Conductive fibers for Smart Wear (스마트웨어 적용을 위한 전도성 소재분석)

  • Park, Yeong-Min;Jin, Sang-U;Jo, Gwang-Nyeon;Kim, Hong-Je;Kim, Tae-Gyu
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • /
    • pp.31-32
    • /
    • 2008
  • In this study, we have investigated a conductive fiber properties for smart wear. The effect of factors such as fiber length, denier, sewing method, washing on conductivity achieved was investigated and determined using stereoscopic microscope, SEM and LCR meter.

  • PDF

Doping Effects with $GeO_{2}$ and $SnO_{2}$ in Mn-Zn Ferrites (Mn-Zn 훼라이트의 $GeO_{2}$$SnO_{2}$ 첨가효과)

  • 최용석;유병두;김종오
    • Journal of the Korean Magnetics Society
    • /
    • v.2 no.2
    • /
    • pp.99-104
    • /
    • 1992
  • The permeability vs. temperature curve, the loss factor and the microstructure of a commercial Mn-Zn ferrites were investigated by X-ray diffractometer, SEM and LCR meter, where the additives, such as $SnO_{2}$ and $GeO_{2}$, were added to the main composition. Their wt% were 0.05, 0.3 and 1.0, respectively. When the content of additives increased, the SPM (Secondary Peak Maximum) of the permeability moved from $80^{\circ}C$ to below the room temperature. This movement, without the significant change of the microstructure, is because Sn and Ge, having the different ionic radius, were soluble in the matrix. There was no variation of the permeability with the frequency up to 100 kHz. And the loss factor showed the maximum value at 10 kHz.

  • PDF

Structural Changes and Dielectric Properties of$Pb(Mg_{1}{3}Nb_{2}{3})O_3$Ceramics Substituted by$Na^+/La^{3+}$Ions ($Na^+/La^{3+}$이온으로 치환된$Pb(Mg_{1}{3}Nb_{2}{3})O_3$의 구조 변화 및 유전 성질)

  • Hong, Young-Sik;Park, Hyu-Bum;Ahn, Tae-Ho;Kim, Si-Joong
    • Journal of the Korean Chemical Society
    • /
    • v.40 no.9
    • /
    • pp.607-614
    • /
    • 1996
  • The structural changes and dielectric properties of Pb1-x(Na1/2La1/2)x(Mg1/3Nb2/3)O3 compounds substituted by 0∼50 mol.% of Na+/La3+ mixed ions were investigated by X-ray diffraction method, IR and Raman spectroscopy, and LCR meter. The amount of perovskite phase increased with the increases of Na+/La3+ substituents and sintering temperatures. Although the superlattice lines due to 1:1 ordering were not detected by X-ray diffraction method, it was found, from the Raman spectroscopy and the increase of diffuseness coefficient, that the ordering behavior was related to the decrease of A site ion size. Dielectric properties in Pb1-x(Na1/2La1/2)x(Mg1/3Nb2/3)O3 were affected by the amount of perovskite phase, grain size, and density. The phase transitions were broadened and phase transition temperatures were lowered by the increase of Na+/La3+ ions.

  • PDF

Characteristics of Variant Dielectric Constants With Respect to Internal Combustion Engine Oil States (내연기관의 엔진오일상태에 대한 유전율 변화 특성)

  • Kim, Dong-Min;Kim, Yong-Ju;Lee, Seung-Hee
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.15 no.1
    • /
    • pp.19-21
    • /
    • 2012
  • The engine oil life of internal combustion engine is shorted by the thermal effect and that causes air pollution. In order to measure the status of engine oil accurately, the exchange of new oil extends the life of combustion engine and reduces environmental pollution. Capacitance probes, such as engine oil and fluids can be used to measure the dielectric constant. In this paper, the degradation of engine oil varies depending on the degree of dielectric properties was analyzed. Depending on the state of the oil, the variant capacitance of the probe was measured by LCR Meter, respectively, and then the permittivity of oil was calculated. In addition, according to the size of the probe by measuring the change in capacitance measurement, accuracy of dielectric constant are presented. According to oil contaminated with the more increase in dielectric constant, we can decide that contaminated oil is available.