Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

Tribological Properties of Aqueous Solutions Composed of Aminated Olive Oil Derivative

수용성 아민화 올리브유 유도체의 트라이볼로지적 특성고찰

  • Choi, Ung-Su (Energymechanics Center, Korea Institute of Science and Technology) ;
  • Lee, Sang-Soon (Dept. of Applied Chem., Dongduck Women's Univ.)
  • 최웅수 (한국과학기술연구원 에너지메카닉스센터) ;
  • 이상순 (동덕여대 응용화학과)
  • Received : 2010.07.30
  • Accepted : 2010.09.15
  • Published : 2010.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Aminated oilve oil derivative as the new organic disperse phases of the water soluble metal working fluid has been synthesized and tribological properties of the aqueous solutions composed of aminated olive oil derivative investigated using Four Ball Wear Tester and Falex EP Tester. The formulated aqueous solutions showed higher antiwear and extreme pressure properties and also lower friction coefficient. On the basis of the the results, water soluble aminated oilve oil derivative showed excellent tribological properties due to the polarizability of oleic acid derivative composed of majority part in oilve oil.

Keywords

References

  1. Yamamoto, S., Tomoda, H., and Watanabe, S., "Water-Soluble Metal Working Fluids Additives Derived from the Esters of Acid Anhydrides with Higher Alcohols for Aluminum Alloy Materials," J. Oleo. Sci., Vol. 56, pp. 463-469, 2007. https://doi.org/10.5650/jos.56.463
  2. Belluco, W. and Chiffre, L.D., "Surface Integrity and Part Accuracy in Reaming and Tapping Stainless Steel with New Vegetable Based Cutting Oils," Tribology International, Vol. 35, pp. 865-870, 2002. https://doi.org/10.1016/S0301-679X(02)00093-2
  3. John, J., Bhattacharya, M., and Raynor, P. C., "Emulsions Containing Vegetable Oils for Cutting Fluid Application," Colloids and Surfaces: Physicochem. Eng. Aspects, Vol. 237, pp. 141-150, 2004. https://doi.org/10.1016/j.colsurfa.2003.12.029
  4. Pawlak, Z., Klamecki, B. E., Rauckyte, T., Shpenkov, G. P., and Kopkowski, A., "The Tribochemical and Micellar Aspects of Cutting Fluids," Tribology International, Vol. 38, pp. 1-4, 2005. https://doi.org/10.1016/j.triboint.2004.04.004
  5. Greely, M. and Rajagopalan, N., "Impact of Environmental Contaminants on Machining Properties of Metalworking Fluids," Tribology International, Vol. 37, pp. 327-332, 2004. https://doi.org/10.1016/j.triboint.2003.11.001
  6. Riddle, B. L. and Kipp, E. M., "Friction and Wear properties of PEG Esters in the Presence of a Complex Phosphate Ester," Lubr. Eng., Vol. 47, pp. 991- 998, 1991.
  7. Wan, Y., Xue, Q., and Cao, L., "Tribological Properties of Some Water-Based Lubricants Containing Polyehtylene Glycol Under Boundary Lubrication Conditions," Synthetic Lubrication, Vol. 13, pp. 375- 380, 1997. https://doi.org/10.1002/jsl.3000130405
  8. Canter, N. M., Chaloupka, J. J., and Fishesser, G. J., "The Use Ehtylene Oxide Ester as Additive in Semi- Synthetic Metal Working Formulation," Lubr. Eng., Vol. 44, pp. 44-49, 1997.
  9. Nakagawa, H., Ohmori, Y., Wantanabe, T., and Fujita, T., "New Cutting Fluid Additive Derived From Esters of Higher Hydroxy Fatty Acids," Toraiborojisuto, Vol. 43, pp. 436-442, 1998.
  10. Sulet, M. W. and Wasilewski, T., "Tribological Properties Aqueous Solutions of Alkyl Polygulcosides," Wear, Vol. 260, pp. 193-204, 2006. https://doi.org/10.1016/j.wear.2005.02.047
  11. Herdan, J. M., "Rolling Fluids based on Vegetable Oils," J. Dynth. Lubr., Vol. 16, pp. 201-210, 1999.
  12. Alander, J. and Wamheim, T., "Model Microemulsions Containing Vegetable Oils," J. Am. Oil Chem. Soc., Vol. 66, pp. 1661-1665, 1989. https://doi.org/10.1007/BF02636198
  13. Choi, U. S, Kwon, O. K., and Lansdown, A. R., "The Mechanism of Action and Performance of Dialkyl 3,5 Di-t-Butyl 4-Hydroxy Benzyl Phosphonates as a New Antiwear Additive," Wear, pp. 63-77, 1991.