Dynamic Analysis of the High-Speed Spindle Structure for Machining Center

머시닝센터용 고속주축 구조물의 동특성 해석

  • 송승훈 (고등기술연구원 생산기술연구실) ;
  • 권오철 (고등기술연구원 생산기술연구실) ;
  • 장낙영 (고등기술연구원 생산기술연구실)
  • Published : 1994.10.01

Abstract

This paper presents a dynamic analysis of the high-speed spindle system for vertical machining center using finite techniques. The computed natural frequencies are compared with the measured frequencies obtained from experimental modal analysis. The results show that the bending and twisting deformations of the spindle housing dominate in the lowest modes owing to low dynamic stiffness of the housing structure. The design parameters in the analysis are : (a) panel thickness of the housing (b ) height of the housing, and (c) spindle-to-column distance of the housing. Through sensitivity analysis and optimizing simulation considering design constraints, an optimal design of the spindle system has been obtained.

Keywords