The Experimental Study of Characteristics of Concrete Strength according to the pattern of curing

양생방법에 따른 콘크리트의 역학적 특성에 관한 실험적 연구

  • 이준구 (농어촌진흥공사 농어촌연구원 연구원) ;
  • 윤상대 (농어촌진흥공사 농어촌연구원 수석연구원) ;
  • 박광수 (농어촌진흥공사 농어촌연구원 수석연구원) ;
  • 최광선 (농어촌진흥공사 농어촌연구원 책임연구원) ;
  • 김명원 (농어촌진흥공사 농어촌연구원 연구원)
  • Published : 1998.04.01

Abstract

The purpose of this study is to investigate the mechanical properties of precast concrete cured by accelerated curing methods such as, steam curing method and warm water curing method varing maximum temperature of curing along to the period of curing. Some specimens are cured by accelerated curing method(warm water curing method) and then deposited in the storehouse. The others are deposited in the storehouse directly. All of these are cured until being tested to compare these two group's mechanical characteristics for each period 3days, 7days, 28days. The goal of this comparison is to estimate the efficiency of accelerated curing method in the case of precast concrete stocked in the field or warehouse for a long term and to make guide line for factory manager to make a economical products of concrete of a good quality. We can conclude some guide lines 1) It is not efficient to cure concrete with accelerated method at higher than 80℃. 2) The continuing of curing period more than 36hr makes damage to concrete in using accelerated curing method. 3) The strength revelation of concrete cured by accelerated curing methods, added rice husk ash more delayed than OPC concrete done but the strength of maximum value is higher than OPC concrete. 4) It is not efficient to use accelerated curing method in the case of storing the products for more than 7days in the aspect of mechanical properties.

Keywords