Fuzzy-Neuro Controller for Speed of Slip Energy Recovery and Active Power Filter Compensator
- Tunyasrirut, S. (Faculty of Engineering and research Center for Communications and Information Technology, King Mongkut's Institute of Technology Ladkrabang) ;
- Ngamwiwit, J. (Faculty of Engineering and research Center for Communications and Information Technology, King Mongkut's Institute of Technology Ladkrabang) ;
- Furuya, T. (Kitakyushu National College of Technology) ;
- Yamamoto, Y. (Kumamoto National College of Technology)
- Published : 2000.10.01
In this paper, we proposed a fuzzy-neuro controller to control the speed of wound rotor induction motor with slip energy recovery. The speed is limited at some range of sub-synchronous speed of the rotating magnetic field. Control speed by adjusting resistance value in the rotor circuit that occurs the efficiency of power are reduced, because of the slip energy is lost when it passes through the rotor resistance. The control system is designed to maintain efficiency of motor. Recently, the emergence of artificial neural networks has made it conductive to integrate fuzzy controllers and neural models for the development of fuzzy control systems, Fuzzy-neuro controller has been designed by integrating two neural network models with a basic fuzzy logic controller. Using the back propagation algorithm, the first neural network is trained as a plant emulator and the second neural network is used as a compensator for the basic fuzzy controller to improve its performance on-line. The function of the neural network plant emulator is to provide the correct error signal at the output of the neural fuzzy compensator without the need for any mathematical modeling of the plant. The difficulty of fine-tuning the scale factors and formulating the correct control rules in a basic fuzzy controller may be reduced using the proposed scheme. The scheme is applied to the control speed of a wound rotor induction motor process. The control system is designed to maintain efficiency of motor and compensate power factor of system. That is: the proposed controller gives the controlled system by keeping the speed constant and the good transient response without overshoot can be obtained.