Design and fabrication of a micromirror using silicon bulk micromachining for out-of-plane right angle reflection

기판으로부터 수직 반사를 위한 실리콘 마이크로 미러의 설계와 제작

Silicon bulk micromachined micromirrors are designed and fabricated for out-of-plane right angle reflection. The micromirror is comprised of a minor plate, springs, magnetic bars and electrodes. Single crystalline silicon is used for a flatness improvement of a mirror plate. Out-of-plane right angle reflection requires a 45 degree operation of the micromirror. The micromirrors are operated by applying a magnetic field, which is generated by a coil located below a substrate. For an individual mirror operation, each mirror is clamped using an electrostatic force against the electromagnetic force. Angular deflections are measured and compared with theoretical data. The micro mirror operates up to 45 degree when magnetic field is 4 kA/m which is generated by a 115 mA coil current Simple addressing is tested, and it is shown that a clamping voltage is less than 5V.