차세대 선재 기판용 Ag 테이프의 제조공정에서 가공 열처리 및 열처리 분위기 변화가 집합조직에 미치는 영향

Effect of thermo-mechanical treatment and annealing atmosphere on fabrication of Ag tapes for YBCO coated conductor

  • 이남진 (한국전기연구원 초전도응용연구그룹) ;
  • 오상수 (한국전기연구원 초전도응용연구그룹) ;
  • 박찬 (한국전기연구원 초전도응용연구그룹) ;
  • 송규정 (한국전기연구원 초전도응용연구그룹) ;
  • 하동우 (한국전기연구원 초전도응용연구그룹) ;
  • 권영길 (한국전기연구원 초전도응용연구그룹) ;
  • 류강식 (한국전기연구원 프론티어사업단)
  • 발행 : 2002.07.01

초록

Ag (silver) can be used for YBa$_2$Cu$_3$O$\_$7-$\delta$/(YBCO) coated conductor tape as the substrate on which YBCO can be deposited directly because of the chemical compatibility of Ag with YBCO. We have fabricated rolled Ag tapes with various total reduction ratios and different thicknesses. As-rolled Ag tape was recrystallized at 750$^{\circ}C$ for 30min in air and vacuum of 10$\^$-3/ torr. The orientation distribution functions (ODF) calculated from three x-ray pole figures of as-rolled and recrystallized tapes were analysed. As the total reduction ratio increased from 94 to 98%, the development of {110}texture of as-rolled Ag improved. Under the present experimental condition, maximum {110}ODF value of Ag tape was obtained for the sample with 94% total reduction ratio which was recrystallized at 750$^{\circ}C$ for 30min in vacuum of 10$\^$-3/ torr.

키워드