Proceedings of the Korean Society for Technology of Plasticity Conference (한국소성가공학회:학술대회논문집)
- 2002.05a
- /
- Pages.25-28
- /
- 2002
Design of Tube/Pipe Straightener for Aluminum 7001 Pipes with CAD and CAE Methods
CAD/CAE를 이용한 알루미늄 7001 소재 파이프의 교정을 위한 롤러교정기의 설계
Abstract
This paper is concerned with the design of roller profiles in tube/pipe straightener with both methods of Computer Aided Design and Computer Aided Engineering. Design analysis is carried out from two point of view. The one is the research in the minimization of tube pitch which was very important factor in levelling process. In order to minimize tube pitch, profiles of the roller were calculated so that the contact region between roller and tube was maximized. The other is determination of an optimum amount of intermesh for the proper progress without a jam in levelling process. Generally the jamming trouble was casued by excessive amount of intermesh in levelling process. The optimum amount of intermesh was determined through the finite element analysis.
Keywords
- Tube/Pipe Straightener;
- Levelling Process;
- Finite Element Method;
- Curvature;
- Pitch;
- Intermesh;
- Incline Angle