Proceedings of the Korean Society for Technology of Plasticity Conference (한국소성가공학회:학술대회논문집)
- 2003.05a
- /
- Pages.359-362
- /
- 2003
Hot Metal Extru-Bending Process for the Aluminum Curved Tube Product
알루미늄 중공 곡관제품의 열간 압출굽힘가공
Abstract
The bending phenomenon has been known to be occurred by the different of velocity at the die exit. The difference of velocity at the die exit section can be obtained by the different velocity of billets through the multi-hole container and by the cohesion of billet inside the porthole die chamber. The bending phenomenon can be controlled by the different hole diameter. The experiments using aluminium material for the curved tube product had been done. The results of the experiment show that the curved tube product can be formed by the extru-bending process without the defects such as the distortion of section and the thickness change of the wall of tube and the folding and wrinkling. It is known that the welding and extruding of each billet has done simultaneously although the curved tube is extruded with four billets.
Keywords
- Extrusion;
- Bending;
- Extru-Bending;
- Aluminium Extruded Product;
- Multi-hole container;
- Rectangular Curved Tube