A Study on the Material Properties of Concrete Using Crushed Sand

부순모래를 사용한 콘크리트의 물성에 관한 연구

  • 윤용호 (계명대학교 공과대학 토목공학과 대학원) ;
  • 정용욱 (계명대학교 공과대학 토목공학과 대학원) ;
  • 이승한 (계명대학교 공과대학 토목공학과)
  • Published : 2003.11.01

Abstract

This paper is to investigate the characteristics of a concrete in which river sand is partially substituted with crushed sand. Since river sand has a relatively small fineness modulus, there is a need to increase the fineness modulus of sand used in the manufacture of concrete. In an experiment, it was observed that when river sand had a fineness modulus of 2.0~2.4 and crushed sand had a fineness modulus of 2.8~3.5, the substitution rate of the crushed sand was preferably within the range of 25~50%. The experimental results also revealed that as the substitution rate of the crushed sand increased, the flowability of the concrete tended to increase. However, when the substitution rate of the crushed sand reached 75% or more, the workability of the concrete was considerably poor. Further, as the substitution rate of the crushed sand increased, the air content and the bleeding rate of the concrete were low.

Keywords