V-t and Barrier Characteristics for HTS Transformer Insulation Design

고온초전도변압기 절연설계를 위한 격벽효과와 수명특성

  • Joung, Jong-Man (Department of Electrical Engineering & Engineering Research Institute, Gyeongsang National University) ;
  • Baek, Sung-Myeong (Department of Electrical Engineering & Engineering Research Institute, Gyeongsang National University) ;
  • Kim, Young-Seok (Department of Electrical Engineering & Engineering Research Institute, Gyeongsang National University) ;
  • Kwak, Dong-Soon (Department of Electrical Engineering & Engineering Research Institute, Gyeongsang National University) ;
  • Kim, Sang-Hyun (Department of Electrical Engineering & Engineering Research Institute, Gyeongsang National University)
  • 정종만 (경상대학교 전기공학과 및 공학연구원) ;
  • 백승명 (경상대학교 전기공학과 및 공학연구원) ;
  • 김영석 (경상대학교 전기공학과 및 공학연구원) ;
  • 곽동순 (경상대학교 전기공학과 및 공학연구원) ;
  • 김상현 (경상대학교 전기공학과 및 공학연구원)
  • Published : 2003.05.30

Abstract

In the response to an increasing demand for electrical energy, much effort aimed to develop and commercialise HTS power equipments is going on around the world. For the development, it is necessary to establish the dielectric technology in $LN_2$. Hence many types of dielectric tests should be carried out to understand the dielectric phenomena at cryogenic temperature and to gather various dielectric data. Among the many types dielectric tests, the barrier effect were conducted with the simulated electrode after analysing the insulating configuration of the pancake coil type HTS transformer. The influence of a barrier on the dielectric strength was measured according to the size and the position of the barrier. It was shown that the effectiveness, the ratio of the breakdown voltage in presence of barrier to the voltage without barrier, is highest when the barrier is placed at the needle electrode side. And the barrier effect was not depend on the electrode array. The life time to breakdown with decreasing the applied voltage was increased remarkably having wide error band but the shape parameter in Weibull distribution was almost constant.

Keywords